![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() ![]() |
![]() |
Petepat |
![]()
Post
#1
|
Member ![]() ![]() Group: Members Posts: 60 Joined: 1-December 19 From: Florida Member No.: 23,691 Region Association: None ![]() |
So I've got my speedometer out of my 72 914 and have opened it up. I need to get the needle off to get the faceplate off to fix the thing, the problem is trying to remove the needle, it's stuck solid or is there a simple way to remove it I don't know of? All suggestions welcomed.
|
dr914@autoatlanta.com |
![]()
Post
#2
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,900 Joined: 3-January 07 From: atlanta georgia Member No.: 7,418 Region Association: None ![]() |
send it to Hartmut at palo alto speedometer
So I've got my speedometer out of my 72 914 and have opened it up. I need to get the needle off to get the faceplate off to fix the thing, the problem is trying to remove the needle, it's stuck solid or is there a simple way to remove it I don't know of? All suggestions welcomed. |
87m491 |
![]()
Post
#3
|
Member ![]() ![]() Group: Members Posts: 276 Joined: 29-July 12 From: Portland, the original! Member No.: 14,731 Region Association: North East States ![]() ![]() |
Generally it is a twist and pull for the older analog dials of this type. Of course you also have to immobilze the speedo shaft to affect this.
So I've got my speedometer out of my 72 914 and have opened it up. I need to get the needle off to get the faceplate off to fix the thing, the problem is trying to remove the needle, it's stuck solid or is there a simple way to remove it I don't know of? All suggestions welcomed. |
914Sixer |
![]()
Post
#4
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,909 Joined: 17-January 05 From: San Angelo Texas Member No.: 3,457 Region Association: Southwest Region ![]() ![]() |
Take small salad fork and lift up
|
ClayPerrine |
![]()
Post
#5
|
Life's been good to me so far..... ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 15,537 Joined: 11-September 03 From: Hurst, TX. Member No.: 1,143 Region Association: NineFourteenerVille ![]() ![]() |
Pry upward with a plastic trim removal tool.
The plastic will keep you from marring the front face of the gauge. |
Petepat |
![]()
Post
#6
|
Member ![]() ![]() Group: Members Posts: 60 Joined: 1-December 19 From: Florida Member No.: 23,691 Region Association: None ![]() |
Thanks guys the salads fork did the trick!
|
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 15th June 2024 - 05:13 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |