 How hard to rebuild a weber progressive?, I know it's crap, but the 40's have to wait |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| purple |
 Aug 22 2007, 02:48 PM
Post
#1
|
|
Pigeon feeders attract me  Group: Members Posts: 938 Joined: 24-July 07 From: Houston, TX Member No.: 7,942 Region Association: None  |
Hey Guys,
Do any of you have experience rebuilding the weber progressive? The throttle plates on the outside of mine where the linkage attaches are all loose and causing fast idling. Do I have to rebuild to fix this? can i just leave the thing on the car and tighten up all the linkages on the side with it in the car? Would there be a benefit to rebuilding this carb? I realize that dual 40's are the hot ticket, but i dont have a spare ~$800 for doing that right now. Thanks guys |
   |
 
|
| Spoke |
Aug 22 2007, 07:59 PM
Post
#2
|
|
Jerry Group: Members Posts: 7,185 Joined: 29-October 04 From: Allentown, PA Member No.: 3,031 Region Association: None 
|
I had the single progressive on my 1.7L and although I didn't buy a rebuild kit, I did take the carb apart, clean it, and put it back together. Ran a lot better after the cleaning.
You should be able to do much better than $800 for a used set. Maybe $300-$400? The performance of the dual 40's versus the single progressive will open your eyes wide. Get the single progressive working good and look for a used set of 40's. Last year I picked up a used set of IDF40s that needed rebuilt. The 40's came mounted on top of a 1.8L rebuilt sometime before the PO bought it in a parts car. The 1.8L also had SSHE too. All for $600. Spoke |
|
|
|
| Grelber |
Aug 22 2007, 08:30 PM
Post
#3
|
|
Insert favorite Don Rickles joke here. Group: Members Posts: 690 Joined: 30-May 06 From: McKinney, Texas Member No.: 6,107 Region Association: Southwest Region |
Hey, Purple, there's a '70 914 on the Craig's list in the DFW area that says it has a 2.0L and dual Weber's, and he's only asking $500.00 for the whole car:
http://dallas.craigslist.org/car/402797872.html You could buy the car, sell off the parts you don't need for probably more than $500.00, and have a free set of Webers. I'd go for it myself, but don't have any storage. |
|
|
|
| Spoke |
Aug 22 2007, 09:01 PM
Post
#4
|
|
Jerry Group: Members Posts: 7,185 Joined: 29-October 04 From: Allentown, PA Member No.: 3,031 Region Association: None
|
QUOTE(Grelber @ Aug 22 2007, 10:30 PM)  it has a 2.0L and dual Weber's Put the 2L in your car and also get a big smile as you drive. (IMG:style_emoticons/default/aktion035.gif) (IMG:style_emoticons/default/driving.gif) Spoke |
|
|
|
| Twystd1 |
Aug 22 2007, 09:04 PM
Post
#5
|
|
You don't want to know... really..... Group: Members Posts: 2,515 Joined: 12-September 04 From: Newport Beach, California Member No.: 2,743 |
The weber DGAV or DGV carb is stupid simple to rebuild.
Go for it....!!!!!!! Get a carb kit before you start. The directions are typically in the carb kit. And toss that POS as soon as Possible. Claytonious |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd July 2025 - 11:05 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.