Local race shop for alignment / tire mounting, Northern NJ |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Local race shop for alignment / tire mounting, Northern NJ |
yarin |
Jan 30 2009, 04:30 PM
Post
#1
|
'14-X'in FOOL Group: Members Posts: 988 Joined: 13-May 03 From: Guttenberg, NJ Member No.: 693 Region Association: North East States |
Looking for a local race shop that knows 914s that I can take mine to do an alignment. It's been four years since I got the car, never aligned/corner balanced so i figure its time. Plus I can have them check the bushings and whatnot, everything looks tight to me though.
I also have a fresh set of 205/50/15s to mount on a set of Panasports. Most tire shops refuse to touch that size, especially a race compound. Any suggestions in North Jersey or New york west of the river? I've been to Eurotire before, good work but a little pricey. Hard to schedule time too. Any other ideas? |
So.Cal.914 |
Jan 30 2009, 05:25 PM
Post
#2
|
"...And it has a front trunk too." Group: Members Posts: 6,588 Joined: 15-February 04 From: Low Desert, CA./ Hills of N.J. Member No.: 1,658 Region Association: None |
Is Rockaway township to far? Powertech is next door to my Cousins property. I went over to say hi. It looked like a very nice shop. On fridays I would see them leaving in their truck and trailer with their race car. I think Raby knows the Guy, maybe he will jump in.
Home page link |
TimT |
Jan 30 2009, 10:56 PM
Post
#3
|
retired Group: Members Posts: 4,033 Joined: 18-February 03 From: Wantagh, NY Member No.: 313 |
Powertech is good.
You could always take a ride out to Long Island and we could take care of you. Shop is just off of the Meadowbrook Pkwy off Merrick Rd. |
TimT |
Jan 30 2009, 10:59 PM
Post
#4
|
retired Group: Members Posts: 4,033 Joined: 18-February 03 From: Wantagh, NY Member No.: 313 |
BTW, Keith at Powertech has one wicked fast 914
|
tod914 |
Jan 30 2009, 11:57 PM
Post
#5
|
Advanced Member Group: Members Posts: 3,755 Joined: 19-January 03 From: Lincoln Park, NJ Member No.: 170 |
I don't think you'll find a reasonable shop in NJ. Most are $100 an hour.
|
yarin |
Jan 31 2009, 06:34 AM
Post
#6
|
'14-X'in FOOL Group: Members Posts: 988 Joined: 13-May 03 From: Guttenberg, NJ Member No.: 693 Region Association: North East States |
I've heard great things about powertech as well. Had some dealings on the 944 side a few years ago.
It's just hard to justify spending $125 to mount tires that cost $500. Know what i mean? Thanks Tim! |
ArtechnikA |
Jan 31 2009, 06:51 AM
Post
#7
|
rich herzog Group: Members Posts: 7,390 Joined: 4-April 03 From: Salted Roads, PA Member No.: 513 Region Association: None |
It's just hard to justify spending $125 to mount tires that cost $500. Know what i mean? You want mount & balance for less than $25 a corner? Would you like some 39-cent premium to go with that? Mount & balance is gonna be $100 pretty much anywhere you go, especially if you're doing valve stems. After that, it's just a matter of how much experience and 'ambience' you want for your money. If you want the comfort factor of dealing with a professional shop that will not damage your wheels, a slight premium is a small price to pay (say - less than replacing a wheel, for sure...) If it's the differential cost that's bugging you, you could always spend more for tires... |
rmital |
Jan 31 2009, 09:56 AM
Post
#8
|
Northeast optimist Group: Members Posts: 1,947 Joined: 12-December 05 From: Park Ridge, NJ Member No.: 5,268 |
StableEnergies in Garfield.
you'll find no one more familiar with the 914 and will do a great job. ...cash could be a factor, not the cheapest guy on the block |
TimT |
Jan 31 2009, 08:32 PM
Post
#9
|
retired Group: Members Posts: 4,033 Joined: 18-February 03 From: Wantagh, NY Member No.: 313 |
I know Bob @ Stable is a 914 guy, I didn't think he did and service or set up work though... except on his own car...
Bob ans Laurette are good people.. Stable is one of the my go to places when I need stuff |
rmital |
Jan 31 2009, 08:52 PM
Post
#10
|
Northeast optimist Group: Members Posts: 1,947 Joined: 12-December 05 From: Park Ridge, NJ Member No.: 5,268 |
I know Bob @ Stable is a 914 guy, I didn't think he did and service or set up work though... except on his own car... Bob ans Laurette are good people.. Stable is one of the my go to places when I need stuff ...did an alignment on my 914 a few years ago. Replaced the oil cooler seals too. But the bill definitely motivated me to learn how to do my own work since. but you get what you pay for...great work! |
turboman808 |
Feb 1 2009, 10:50 PM
Post
#11
|
Advanced Member Group: Members Posts: 2,718 Joined: 31-January 06 From: North Jersey Member No.: 5,505 Region Association: North East States |
Thats great that there is a place that close to me in Garfield.
|
auerbach |
Feb 2 2009, 12:02 AM
Post
#12
|
Lee David Auerbach, Esq Group: Members Posts: 235 Joined: 26-July 07 From: Westchester, New York Member No.: 7,947 Region Association: MidAtlantic Region |
NNJr is having a program at Stable Energies on 2/14. I have to miss it for the wife, but if you want to meet there during the week -- i'm game. I need a new helmet and some other toys.
|
Lo-Fi Version | Time is now: 3rd June 2024 - 11:39 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |