Let the Blasting Begin!, Mobile soda blaster at Series 9 today. |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Let the Blasting Begin!, Mobile soda blaster at Series 9 today. |
Series9 |
May 4 2011, 07:09 AM
Post
#21
|
Lesbians taste like chicken. Group: Members Posts: 5,444 Joined: 22-August 04 From: DeLand, FL Member No.: 2,602 Region Association: South East States |
Cool.
I asked the guy how many CFM his compressor puts out. 700cfm@170psi. (IMG:style_emoticons/default/huh.gif) Attached image(s) |
d914 |
May 5 2011, 07:04 AM
Post
#22
|
Advanced Member Group: Members Posts: 2,331 Joined: 12-July 03 From: Atlanta, ga Member No.: 904 Region Association: South East States |
Don't you need to paint something on like right away to keep it from forming rust? No actually soda inparts a rust protection and part of the reason you need to do an acid wash aferward. I had mine in the basement garage for a good year in bare metal.. Major life interfering with the fun stuff.. I only had minor flash rust and that was mostly where I touched the car. Now fla might be a tad worst on the humity front but there should be no need to rush to a primer. |
Series9 |
May 5 2011, 09:36 AM
Post
#23
|
Lesbians taste like chicken. Group: Members Posts: 5,444 Joined: 22-August 04 From: DeLand, FL Member No.: 2,602 Region Association: South East States |
Don't you need to paint something on like right away to keep it from forming rust? No actually soda inparts a rust protection and part of the reason you need to do an acid wash aferward. I had mine in the basement garage for a good year in bare metal.. Major life interfering with the fun stuff.. I only had minor flash rust and that was mostly where I touched the car. Now fla might be a tad worst on the humity front but there should be no need to rush to a primer. The decks and doors are already gone to the painter for epoxy primer. The blaster said the same as above. The soda residue will protect bare metal for a while. The chassis will be bare for about six weeks. |
Elliot Cannon |
May 5 2011, 04:48 PM
Post
#24
|
914 Guru Group: Retired Members Posts: 8,487 Joined: 29-December 06 From: Paso Robles Ca. (Central coast) Member No.: 7,407 Region Association: None |
Don't you need to paint something on like right away to keep it from forming rust? No actually soda inparts a rust protection and part of the reason you need to do an acid wash aferward. I had mine in the basement garage for a good year in bare metal.. Major life interfering with the fun stuff.. I only had minor flash rust and that was mostly where I touched the car. Now fla might be a tad worst on the humity front but there should be no need to rush to a primer. The decks and doors are already gone to the painter for epoxy primer. The blaster said the same as above. The soda residue will protect bare metal for a while. The chassis will be bare for about six weeks. But then the soda residue hased to be cleaned off before shooting right? If so, what is used to clean it? |
Lo-Fi Version | Time is now: 12th June 2024 - 10:06 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |