 Frame stiffener, overlays longitudinal, Anyone here install a set ? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Luke M |
 Apr 21 2013, 06:05 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,497 Joined: 8-February 05 From: WNY Member No.: 3,574 Region Association: North East States 
 |
I'm getting ready to work on the 6 now that the weather is getting nice again.
One of the major projects that needs to be done is the repair of the r/r outer long. I have most of the metal to start the repair but need some advice on the installation of the frame stiffener kit. This is also known as the clam shells and sold by restoration design. Has anyone done a step by step install for these? I thought there was something on the r/d website but it's no longer there. I know that I need to measure several points on the car prior to welding to confirm it's straight. I'll post pics as I go along with this repair. |
   |
 
|
  |
Replies
| Dasnowman |
Apr 21 2013, 11:36 AM
Post
#2
|
|
You miss 100% of shots you don't take! Group: Members Posts: 265 Joined: 24-May 12 From: Tricities, B.C./ Lake Whatcom Member No.: 14,477 Region Association: Canada |
I'm in the same situation, as the bottom wheel house has rot and also the upper wheel house rust where the battery bracket was. The biggest problem is the bottom wheel house has all the suspension mounted to it. On my car the suspension mounts are in very good shape so I was just going to cut the AA wheelhouse around the suspension mount then weld it in then put the GT 914-6 reinforcement over it. I have a buddy that work in the auto collision industry for many years coming over to have a look at it so that this is the correct way to tackle this or not. I'll run down stairs and take some pictures.. here is a couple for now (IMG:http://www.914world.com/bbs2/uploads_offsite/i156.photobucket.com-14477-1366565797.1.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i156.photobucket.com-14477-1366565797.2.jpg) |
|
|
|
Posts in this topic
Luke M Frame stiffener, overlays longitudinal Apr 21 2013, 06:05 AM
Luke M Some pics of what I have to deal with. Apr 21 2013, 06:21 AM injunmort r/d does have an outer long overlay that goes from... Apr 21 2013, 07:21 AM
Luke M
r/d does have an outer long overlay that goes fro... Apr 21 2013, 07:44 AM cary I have a set on my rack of parts to be used on my ... Apr 21 2013, 08:03 AM Rleog I know that Chris Foley from Tangerine Racing has ... Apr 21 2013, 08:05 AM Dasnowman http://www.914world.com/bbs2/uploads_offsite/i156.... Apr 21 2013, 12:23 PM Luke M
[url=http://s156.photobucket.com/user/dasnowman1/... Apr 21 2013, 02:19 PM Dasnowman
I'm doing the same thing. I cut my new meta... Apr 21 2013, 05:31 PM Luke M
I'm doing the same thing. I cut my new met... Apr 21 2013, 05:44 PM peteyd This is pretty good timing.
We did take the old i... Apr 21 2013, 01:57 PM Luke M
This is pretty good timing.
We did take the old ... Apr 21 2013, 02:17 PM rjames Luke,
I would echo what Cary said. Fix the rust, ... Apr 21 2013, 04:52 PM mepstein I think you have to remove the consoles since they... Apr 21 2013, 06:20 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd April 2026 - 12:59 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.