Turn signals - lights up but don't blink, where do I start? Options

[potomacmidget]

Dear All,

Took my car out for drive post clutch replacement (due to seized throwout bearing) and car shifted great (thanks again John!).

But during short drive noted that turn signals don't "blink" - they illuminate and the indicators light up on the speedometer - but not clicking sound and not blinking? Would this be a relay issue? Or a ground issue? Checked on fuses and they looked good, loosened them and repositioned in case I had some resistance from corrosion, no changed. Any advice appreciated.

Best,
Reg

[North Coast Jim]

Just went through this myself on a 74 2L. My fuse/relay board is the same as troth previous post. Bought new relay, my blinkers worked outside the car but no dash indicator, from the local FLAPS. 22 big ones and I had a dash blinker. The original flasher had 2 internal circuits one for the dash blinker and the other for the lights outside of the car. My dash circuit failed sounds like your external light circuit failed. The new relay has only one circuit, better in my mind.