Porsche special mandrel P258? Options

[slugmika]

Yeehaa, i finally got a Quaife (Dave at GPR is great!) and now its again gearbox time.
This seasons saldo was 3 final drive's and 5cv's, so i'am running out of spare parts, still one set of fd though.

Does anyone have picture and/or dimensions of the special mandrel P258? Could also buy one if someone have extra to sell.
I need to adjust my final drive.
I might still need to do the job without proper tools (IMG:style_emoticons/default/smile.gif) any ideas for that?

Terveisin
Mika

[KenH]

I would not recommend you use any other bolts.

The bolts and clips are avaialble from Porsche.

Bolt - 901 332 276 11

clip - 901 332 285 01

You might check with Quaif about the bolts & if the backlass shims need to be changed.

http://www.quaife.co.uk/index2.htm

If you have to re-set the Backlass & Pre-load:

I suggest you get an old set of Diff Bearings and using a rotory sander, or somthing else, open them up so they just slip over the Diff. shafts.

This way you can easily adjust the shims, otherwise you have to use a "puller"everytime to remove the bearings.

I used this methode and found when I put in "new" bearings and races nothing changed.

Ken