 HELP!! broke chopsticks in combustion chamber, anyone for chinese? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| opera guy |
 Dec 31 2004, 05:40 PM
Post
#1
|
|
Member  Group: Members Posts: 337 Joined: 28-June 04 From: upland, ca Member No.: 2,268  |
sigh,
it was suggested to me from two different sources to use a stick (wooden dowel, pencil, chopsticks...etc) to put into the sparkplug hole to try to find TDC. Needless to say, when ever i work on my car, things gets... complex. so i got this chopstick in the sparkplug hole... turn the wheel and the chopstick started to go down.. down..good, this is going well, so i thought. then i kept turning the wheel, chopstick start to move up. IM EXCITED!! this is gonna work!!! yes!! then, snap, my chopstick broke in half. half was hanging out the sparkplug hole, the other half fell in! is my only alternative = pulling the heads? or can i somehow "fish" out the broken chopstick? argggg help this is a brand new rebuilt, less than 500 miles |
   |
 
|
  |
Replies
| SGB |
Jan 3 2005, 10:46 PM
Post
#2
|
|
just visiting Group: Members Posts: 4,086 Joined: 8-March 03 From: Huntsville, AL Member No.: 404 Region Association: South East States |
the engine is in the car, cylinder sideways.... The chopstick has to be down at the bottom. Could you bend a springy wire like a Y with the bottom bent 90 degrees, so you could reach the low side of the cylinder with the upper prongs of the Y hopefully on each side of the stick, then rotate the handle end so that the stick is brought up between the two prongs.... Could be that once it is flipped uo, pulling it back out will cause the stick to get pinched between the wires too.....
good luck, whatever you do. |
|
|
|
Posts in this topic
opera guy HELP!! broke chopsticks in combustion chamber Dec 31 2004, 05:40 PM
URY914 Shop vac?
Drop in a few termites?
I've got a... Dec 31 2004, 06:23 PM Bleyseng Aaa, I look at the flywheel notch or the fan for t... Dec 31 2004, 06:23 PM opera guy this is plastic chopsticks. looks like i will hav... Dec 31 2004, 06:27 PM URY914 Plastic- no problem. Stick a butain torch in there... Dec 31 2004, 06:35 PM opera guy Dec 31 2004, 06:52 PM DJsRepS Fire that muther up. Drive it at 5500 shifts aroun... Dec 31 2004, 08:40 PM Ray Warren Not sure if you can see it through the spark plug ... Dec 31 2004, 08:52 PM trekkor Remember the the Steve Martin bit, "Let's get ... Dec 31 2004, 09:16 PM Elliot Cannon Use a magnet!! No. Wait. That won't... Dec 31 2004, 10:06 PM kwales OK,
Hows about chewing gum on the end of a piece ... Dec 31 2004, 10:14 PM Rhodes71/914 I'm sorry but I don't think I would want t... Dec 31 2004, 10:15 PM kwales I've got a bunch of surgical graspers and thos... Dec 31 2004, 10:22 PM trekkor How about compresed air to blast it out?
Wear saf... Dec 31 2004, 10:34 PM bryanthompson Fill it with something more dense than the chopsti... Jan 1 2005, 01:03 AM TimT 
