Engine Compartment Blower Hose, L&R Where to Buy Options

[NARP74]

I borrowed this pic from @skota23 in another topic. Does anyone know where to buy the hoses like this? I have seen and tried others but they have issues and I wanted to try these.

[930cabman]

NAPA has it, found it there last year, fit perfect. If I recall it's called "defroster hose"

[Van B]

NAPA has it, found it there last year, fit perfect. If I recall it's called "defroster hose"

I’m gonna need a link @930cabman before I believe a word of what you claim lol… You expect me to believe NAPA had ANYTHING in stock that fits a non-chevy?!

[930cabman]

NAPA has it, found it there last year, fit perfect. If I recall it's called "defroster hose"

I’m gonna need a link @930cabman before I believe a word of what you claim lol… You expect me to believe NAPA had ANYTHING in stock that fits a non-chevy?!

Dug through a pile of 2022 receipts and found NAPA P/N NOE 813-1509. All for less than 6 bucks and long enough for both sides

[Van B]

NAPA has it, found it there last year, fit perfect. If I recall it's called "defroster hose"

I’m gonna need a link @930cabman before I believe a word of what you claim lol… You expect me to believe NAPA had ANYTHING in stock that fits a non-chevy?!

Dug through a pile of 2022 receipts and found NAPA P/N NOE 813-1509. All for less than 6 bucks and long enough for both sides

Thanks brother!

@wonkipop can you spare me a trip out to the garage to uncover the engine and comfirm what size we need for our single hose 74?

[wonkipop]

NAPA has it, found it there last year, fit perfect. If I recall it's called "defroster hose"

I’m gonna need a link @930cabman before I believe a word of what you claim lol… You expect me to believe NAPA had ANYTHING in stock that fits a non-chevy?!

Dug through a pile of 2022 receipts and found NAPA P/N NOE 813-1509. All for less than 6 bucks and long enough for both sides

Thanks brother!

@wonkipop can you spare me a trip out to the garage to uncover the engine and comfirm what size we need for our single hose 74?

you are gunna love this.

according to PET it should be 460mm long.
but i made the sleeve exactly to sleeve over the two halves.
and mine is 520mm long.
EDIT i double checked - i am measuring it in car bending tape around so it kind of stretches a bit. the tube that is. being corrugated. but i'd say that is what it is.

i don't know what PET determines is a length measurement.
but its 520 long for the original hose that was on my car.

55mm diam cause it sleeves inside a 60mm diam tight.
@NARP74 has that bit right.
so 57 should be good. (IMG:style_emoticons/default/beerchug.gif)