Spoiler clears the driveway!!!, It's getting there Options

[skline]

I installed the front bumper/spoiler today cause I needed to verify it would clear the driveway when I pull in and out. I do need to go very slow but it clears by about 1/2 inch. Took it for a little romp down the street again today and the throttle stuck on me a little. Kind of scary but I was able to tap the pedal and it backed off. Time to go through double check everything again. Found a steering coupler that was missing the pinch bolt while installing the gauges. So I need to replace that first thing. It's the little stuff. Now I am off to the store to get some more nuts and bolts and washers. Tomorrow is another day. The white car is just in need of tires and bodywork now. Runs good, shifts perfect and slides easily around corners. Nice torque on it too, should do well in an AX. We will see.

[skline]

I have not tackled that job yet. I raised the front of the car and put air in the tires. It brought it up enough to clear going in and out. I may not get to the rear bushings till after the WCC. It depends on time and what else I have to do. The white car is ready for body work and tires now and the Chalon is really close, I just need to hook up all the lights and moutn the plates so it is legal to run on the street. Then I will primer it and it will be ready to go to WCC. The white car needs all the work now. All body and paint.