 PAINT STRIPPING, SOME KIND OF JOKE!!! |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| TINCAN914 |
 Oct 22 2005, 11:15 AM
Post
#1
|
|
Summer's Commin...  Group: Members Posts: 2,440 Joined: 18-August 05 From: Colorado Springs, CO. Member No.: 4,611 Region Association: Rocky Mountains  |
OK so I went down and got some aircraft stripper this morning. Reading and taking everyone's suggestions, based on previous posts. THis is some kind of joke right? THis is something everyone plans for the newbies?
It is coming off but with three layers of paint good god what a pain in the ass....... I sear there is 12 coats of paint ifthere's one!!! (IMG:http://www.914world.com/bbs2/html/emoticons/headbang.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/headbang.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/headbang.gif) To top it off. I'm having the carpet cleaned, and the guy is running the hoses through the house, and then out the garage. He is finishing up and while winding his hoses, he knocks over the pan I'm using to brush the stripper on the car with, and the can of the stripper. Dragging the drop clothes the length of the garage!!!! Is everyone stupid around the country, or just in California!!! Deep breath!!!!!! mmmm ok...Back to work..... |
   |
 
|
  |
Replies
| SpecialK |
Oct 22 2005, 11:46 AM
Post
#2
|
|
aircraft surgeon Group: Benefactors Posts: 3,211 Joined: 15-March 04 From: Pacific, MO Member No.: 1,797  |
The "aircraft stripper" works great on smaller parts, but I can imagine stripping an entire car with it. (IMG:http://www.914world.com/bbs2/html/emoticons/huh.gif)
This is gonna sound kind of hokey, but I'm using (or used a month or so ago for an experiment) a set up that I rigged for sanding the drywall mud in my house to lessen the amount of dust created by this process. I tried just hooking my shop vac to the sander with a length of hose, but the filter in the shop vac clogged within seconds from the super fine mud dust........so "plan B". I saw one of these at Lowe's, but couldn't see paying $40 for something so simple. I'll see if I can describe it so I don't have to drag all of the crap out for a pic...I've got a 1/4 sheet Porter/Cable electric palm sander with a dust collector port (works fine on small projects, but clogs up fast). I ran a 1" dia. hose (15' long) from the collector port on the sander, into a spare 5 gal. bucket (old 'mud' container w/lid [hole in lid for inlet hose from sander, and enough hose fed through the lid to reach the bottom of the bucket]), filled the 5 gal. half way with water, cut another hole in the lid for my shop vac hose to fit through (tight fit, only inserted a couple of inches to prevent it from sucking water). So here's what happens.....You switch on the shop vac, the shop vac sucks on the bucket drawing on the hose that goes to the sander collector port (think big waterpipe (IMG:http://www.914world.com/bbs2/html/emoticons/smoke.gif) ). The dust gurgles through the water in the bucket retaining a significant amount of the dust. Any dust that escapes the "water trap" is then filtered by the shop vac.....virtually no dusty mess created by sanding the car. And the shop vac filter lasts much longer before replacement is required. (IMG:http://www.914world.com/bbs2/html/emoticons/beerchug.gif) |
|
|
|
Posts in this topic
bmunday PAINT STRIPPING Oct 22 2005, 11:15 AM
McMark Nobody said it was easy, but it is the easiest. I... Oct 22 2005, 11:44 AM J P Stein I had up to 6 color coats on my shitbox.....now th... Oct 22 2005, 11:51 AM J P Stein anuther Oct 22 2005, 11:51 AM J P Stein again Oct 22 2005, 11:53 AM J P Stein just one color coat here Oct 22 2005, 11:53 AM McMark ... Oct 22 2005, 11:54 AM SpecialK Oct 22 2005, 12:15 PM bmunday Six Coats???? Oh man.. It appears that I have thre... Oct 22 2005, 12:48 PM Aaron Cox <... Oct 22 2005, 12:51 PM bmunday Oct 22 2005, 12:51 PM JOHNMAN It sounded like some sort of power BONG. Leave it... Oct 22 2005, 12:58 PM bmunday <... Oct 22 2005, 01:54 PM SpecialK <... Oct 22 2005, 01:58 PM jd74914 ... Oct 22 2005, 02:42 PM Aaron Cox <... Oct 22 2005, 02:51 PM Crazyhippy So where's the stripper party gonna be held? ... Oct 22 2005, 03:15 PM bmunday Eating lunch now,,, Still working on the hood.. SS... Oct 22 2005, 03:21 PM SpecialK <... Oct 22 2005, 04:11 PM SpecialK <... Oct 22 2005, 04:14 PM Aaron Cox ... Oct 22 2005, 04:22 PM bmunday <... Oct 22 2005, 04:50 PM Verruckt ... Oct 22 2005, 04:59 PM bmunday ... Oct 23 2005, 09:35 AM SpecialK You learn something everyday. <... Oct 23 2005, 11:44 PM Twystd1 Yo Brian,
If you are doing big panels...
Put a t... Oct 24 2005, 08:53 PM Dr. Roger I got yer stripper. http://... Oct 25 2005, 02:33 PM spunone Heh Clayton adding toluene makes it react quicker ... Oct 25 2005, 03:16 PM Brando Appearantly blasting with dry ice is the new shizn... Oct 25 2005, 03:51 PM Twystd1 Yeah.. Stripping with BLASTED ON dry ice IS the sh... Oct 25 2005, 11:36 PM Aaron Cox you da man dawg http://www.91... Oct 26 2005, 12:14 AM
Brotherbob The dry ice is a good deal , it can also be used i... Oct 26 2005, 07:33 AM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th July 2025 - 02:35 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.