 3.0 guys - anyone running carbs, what cam? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Mike D. |
 Feb 7 2007, 02:06 PM
Post
#1
|
|
OK, It runs now, and pretty good too!  Group: Members Posts: 1,456 Joined: 3-January 03 From: Santa Clarita, Ca Member No.: 85 Region Association: None 
 |
I'm looking at possibly getting a 3.0 but it has no F.I. So I would just run it with webbers.
Does anyone out there have this set up now? Are You running the CIS cam or was it changed out to a early T,E or S? Bruce Andersons book says it's an easy 200HP with Webbers (set correctly) and headers, and the stock CIS cam. Any thoughts? TIA, Mike D. |
   |
 
|
  |
Replies
| JWest |
Feb 7 2007, 03:15 PM
Post
#2
|
|
Senior Member Group: Members Posts: 1,664 Joined: 6-January 03 From: Fort Worth, TX Member No.: 97 Region Association: None
|
The problem is that valves will hit the pistons with the more aggressive cam grinds.
So change pistons and cams if you want something like S or Solex profiles, or go with 964s for the easy (but milder) setup. |
|
|
|
Posts in this topic
Mike D. 3.0 guys - anyone running carbs Feb 7 2007, 02:06 PM
mikez The CIS cam is fine....the 964 cam is better. If ... Feb 7 2007, 02:17 PM Brando 906 cams!
Not very streetable but fun.
Actua... Feb 7 2007, 02:58 PM LvSteveH Keep in mind that the 964 cams will work better wi... Feb 7 2007, 06:06 PM Headrage
The problem is that valves will hit the pistons w... Feb 7 2007, 06:07 PM TimT I have webcam 20/21's in my 3.2 six.. stock C... Feb 7 2007, 07:06 PM kconway Uhhh, Mike, whatya going to do with your 6?
Kevin
... Feb 7 2007, 07:47 PM
Mike D.
Uhhh, Mike, whatya going to do with your 6?
Kevin... Feb 7 2007, 10:44 PM bwilless The 'E' Cams are the hot setup for a 3.0 w... Feb 7 2007, 09:37 PM dekman I agree...my engine builder used "E" cam... Feb 7 2007, 10:35 PM dgw My six had a stock 82 3.0 with the Webber's of... Feb 7 2007, 10:44 PM Headrage
Allen, I couldn't remember what size six you ... Feb 7 2007, 11:49 PM 914Timo I have ยด79 3.0 with Solex cams and Webers. Piston... Feb 8 2007, 07:04 AM Racing916 I run a 2.7L w/Carbs and I also use "E" ... Feb 8 2007, 07:12 AM Eric_Shea
Nope.
I agree E-cams and Webers but you'll ... Feb 8 2007, 03:10 PM Mike D. Thanks all...
Eric, that is the exactly what I wa... Feb 9 2007, 02:18 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 6th December 2025 - 05:12 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.