 914 webber conversion made...now what? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| stephenf |
 Feb 17 2007, 03:22 PM
Post
#1
|
|
Newbie  Group: Members Posts: 11 Joined: 17-February 07 From: california Member No.: 7,544  |
ive taken 1.8L and put 96mm big bore on, balanced pistons
a newer cam better tuned for the carbs, 44idf webbers, targa exhaust complete rebuild removed all heater boxes and dammed the ports all smog equip removed Q: car runs pretty well, occasional pop out of the carbs the problem is sitting at idle with the windows down....the fumes are just noxious any suggestions: msd? changing stock idf jets to what? signed hatin to slow down and smell the flowers |
   |
 
|
  |
Replies
| Twystd1 |
Feb 24 2007, 10:47 PM
Post
#2
|
|
You don't want to know... really..... Group: Members Posts: 2,514 Joined: 12-September 04 From: Newport Beach, California Member No.: 2,743 |
Your Webers ARE going to pop for the first 5 minutes on a cold engine.
Especially if you have CroMo pushrods. And if your valves are set perfect. (Not loose) Get used to it. Tell us what smell you are having and WHEN do you smell it??? AND: Like the fellas said before. Have you checked your float settings? Do you have around 3 Lbs of fuel pressure? (use a gauge) Does the fuel pressure fluctuate at all? Check it out and report back with your findings. Cheers, Clayton |
|
|
|
Posts in this topic
stephenf 914 webber conversion made...now what? Feb 17 2007, 03:22 PM
dr914@autoatlanta.com
ive taken 1.8L and put 96mm big bore on, balance... Feb 17 2007, 03:48 PM
fat73
ive taken 1.8L and put 96mm big bore on, balanc... Feb 20 2007, 09:03 AM stephenf Thanks for the input but i made a mistake on my po... Feb 24 2007, 02:49 PM terrymason
2. WHERE THE OIL BREATHER TUBE RUNS OUT OF THE T... Feb 24 2007, 11:42 PM jr91472 What have you done regarding tuning and syncing th... Feb 17 2007, 03:49 PM r_towle what size venturis do you have.
what size main, ai... Feb 17 2007, 04:47 PM john rogers I would suggest finding someone or someplace that ... Feb 17 2007, 11:01 PM SirAndy
I agree that 44s are probably a tad to big.
:agr... Feb 17 2007, 11:37 PM Borderline I'm building a similar 1911cc engine, IRC, for... Feb 17 2007, 11:50 PM SirAndy
I'm building a similar 1911cc engine, IRC, fo... Feb 18 2007, 12:10 AM Twystd1 WITHOUT THE SPECS OF THE CARBS.........
We can... Feb 18 2007, 01:37 AM lotus_65 did you say you removed the charcoal cannister and... Feb 18 2007, 07:10 AM stephenf thank you everyone for the fast response....
this... Feb 19 2007, 10:05 PM John Is the odor that you smell raw gas or exhaust? Feb 24 2007, 07:43 PM 904svo Check your float levels if too high it will spill ... Feb 24 2007, 08:08 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th June 2024 - 08:45 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.