Mini V8? Could it be done, easily?, Thinking outside the box again Options

[Dr Evil]

I remember no too long ago someone posted a bitchen link to a mini V8 made from 2 hyabusa engines. It was a great idea, but out of the price and consideration range for probably all of us. This got me to thinking, though. The hard part is having to cast a block and a crank to fit the hyabusas together. While this engine is by far the bset choice for car applilcations due to its overwhelming power, there has to be another, easier alternative.
I was wondering how hard it would be to take 2 honda V4 1100 engines (pretty common and easy to get) and make the out put of one to the shaft of another. This would remove any need for a contiguous case/crank and yet serve the same purpose. The hondas came to mind because it is what I am familiar with in teh V4 configuration. They would be compact, easy to plumb, high rev, relatively low maitenance, and high in cool factor. Or, how about mating two large V engines together = more tq, lower reving, air cooled (or not). With the ponies that the motorcycle engines are pushing these days, adding 2 togather would give a light car like ours a nice boost and probably be lost of fun.

Any thoughts?

If I had it my way I would mate two BMW K1100 16V engines together in a flat opposed 8 configuration, but thats a bit out of my skills level.

[dwillouby]

Why dont you just cut a chevy V8 in half? Makes a great reving V4. Dirt racers do this a lot.

David

[RoninEclipse2G]

Why dont you just cut a chevy V8 in half? Makes a great reving V4. Dirt racers do this a lot.

David

a chevy 4.3 v6 is almost the same thing, just two cyl lopped off.