 Smoke diagnosis: what do ya think? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Dr Evil |
 Nov 3 2007, 05:16 PM
Post
#1
|
|
Send me your transmission!  Group: Members Posts: 23,038 Joined: 21-November 03 From: Loveland, OH 45140 Member No.: 1,372 Region Association: MidAtlantic Region 
 |
So my rebuilt 2.7 now smokes like a chimney out the tail pipe (blows smoke rings, too). I have maybe 600mi on it and it didnt always smoke, just on this last long jaunt did it start. So, I noticed the oil level was low...I could have sworn it was full before I left on my last 300mi trip. When I pulled the cap off of the oil tank to check the level (while the engine is running) smoke came out of the filler. This would seem to signal to me that there is much blow back...I am hoping that it is because the rings have not seated, but wanted to know what you all think.
|
   |
 
|
  |
Replies
| Dave_Darling |
Nov 4 2007, 11:12 PM
Post
#2
|
|
914 Idiot Group: Members Posts: 15,161 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California
|
Overfilling a six-cylinder with oil can result in tons of smoke out the tailpipe. Every autoX school we get one new owner who doesn't realize you have to have the engine running when you check the oil level and overfills the heck out of it. The result is masses of smoke once the engine warms up and the car is tossed around. Always freaks the new owner out... (IMG:style_emoticons/default/wink.gif)
Dunno if this has any bearing on your situation, but... --DD |
|
|
|
Posts in this topic
Dr Evil Smoke diagnosis: what do ya think? Nov 3 2007, 05:16 PM
Twystd1 Well... As far as thr rings being broken in. Bout ... Nov 3 2007, 05:26 PM Dr Evil I am pretty sure the guides are cool as they were ... Nov 3 2007, 06:03 PM sww914 I had the same problem with my 2056. Once I put cr... Nov 3 2007, 06:18 PM
JPB
I had the same problem with my 2056. Once I put c... Nov 3 2007, 06:37 PM Dr Evil :barf: :headhurts: :shitfan: :sick3d:
Can ya ... Nov 3 2007, 06:30 PM Aaron Cox did your FI MS project run way rich????
too much ... Nov 3 2007, 06:51 PM Dr Evil Aaron, you may have helped ease my mind. Option #2... Nov 3 2007, 06:56 PM type11969 Welcome to borrow my leak down tester, just let me... Nov 3 2007, 07:05 PM Dr Evil Thanks Chris,
My plugs were nice last I saw, but o... Nov 3 2007, 07:11 PM Dr Evil FYI, I used the recommended Goetz (sp) rings, not ... Nov 4 2007, 10:53 PM Dr Evil
Overfilling a six-cylinder with oil can result in... Nov 5 2007, 04:40 PM TeenerTim I had the same thing happen to my 2.7 911. It suck... Nov 5 2007, 11:31 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 12:13 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.