 VW Bus engine in a 914? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| LCOX |
 Nov 27 2016, 12:40 PM
Post
#1
|
|
Member  Group: Members Posts: 93 Joined: 19-December 09 From: Pinnacle Member No.: 11,148 Region Association: None  |
Hey everyone. Looking at a 914 that someone has installed a VW 1.8 bus engine into. The bus engine oil dipstick is installed through the front fan housing into the bottom of the engine case at a 45 degree angle.
-when I pull the oil dipstick out it hits the front engine bay firewall after only a few inches so it can't really be removed to check the oil -can this engine case be drilled to accept the oil dip stick tube and dip stick at the top of the engine beside the oil filler assembly in the same position as the 914 dip stick and tube? This area on the bus engine looks to be the same as the 914 engine case -if so can I drill and install the tube and stick without splitting the engine case? Anyone ever done this? Thanx L |
   |
 
|
Posts in this topic
LCOX VW Bus engine in a 914? Nov 27 2016, 12:40 PM
Boomingbeetle Yes, this can be done. You can dip your drill bit ... Nov 27 2016, 01:08 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd June 2024 - 01:00 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.