 /6 Conversion Bulkhead Access Cover |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| earossi |
 Aug 14 2017, 07:22 PM
Post
#1
|
|
Member  Group: Members Posts: 210 Joined: 8-December 11 From: Chicago, Il Member No.: 13,878 Region Association: Upper MidWest  |
Hi all. We've got a /6 conversion that we completed last year. There is no access to the "front" of the engine for things such as alternator removal, fan, or fan belt replacement. I know that others have fabricated removable cover plates to cover an access hole in the engine compartment bulkhead.
Can someone point me to posts for that modification, so that I don't need to reinvent the wheel. Better, still, would be to find someone who has a fabricated cover plate that I could use on my car. |
   |
 
|
Posts in this topic
earossi /6 Conversion Bulkhead Access Cover Aug 14 2017, 07:22 PM
Larmo63 I drew a line, cut it out and used a firewall cut ... Aug 14 2017, 07:30 PM
mb911
I drew a line, cut it out and used a firewall cut... Aug 14 2017, 07:33 PM mepstein
I drew a line, cut it out and used a firewall cu... Aug 14 2017, 07:55 PM rgalla9146 Easy.
4, 1/4 - 20 screws, square nuts welded to... Aug 15 2017, 08:27 AM mepstein
Easy.
4, 1/4 - 20 screws, square nuts welded t... Aug 15 2017, 08:35 AM mb911
Easy.
4, 1/4 - 20 screws, square nuts welded ... Aug 15 2017, 08:58 AM rgalla9146
Easy.
4, 1/4 - 20 screws, square nuts welded ... Aug 15 2017, 09:43 AM GeorgeRud Getting a piece from a doner car would definitely ... Aug 15 2017, 10:13 AM drem914
Hi all. We've got a /6 conversion that we co... Aug 15 2017, 10:20 AM Keith914 Cover was made from a donor car. Note, the hatch w... Aug 15 2017, 11:09 AM jkb944t On mine I made the top of the hole is 5.25 wide an... Aug 15 2017, 11:22 AM Mark Henry I'm not working with any itty-bitty keyhole, g... Aug 15 2017, 11:40 AM mepstein
I'm not working with any itty-bitty keyhole, ... Aug 15 2017, 11:44 AM Mark Henry
I'm not working with any itty-bitty keyhole,... Aug 15 2017, 11:48 AM rgalla9146 If I had a twin plug engine I'd get a plexi co... Aug 15 2017, 12:00 PM Mark Henry
If I had a twin plug engine I'd get a plexi c... Aug 15 2017, 12:06 PM Mitox This is a little off subject, but I am cutting the... Aug 15 2017, 02:15 PM Steve Curious how big does the hole need to be to replac... Aug 15 2017, 04:20 PM earossi
Curious how big does the hole need to be to repla... Aug 15 2017, 04:50 PM porschetub I made a smaller hole and made a stainless plate t... Aug 15 2017, 05:40 PM Mark Henry
I made a smaller hole and made a stainless plate ... Aug 15 2017, 10:33 PM GeorgeRud Or if it's a carbed engine, remove the intakes... Aug 15 2017, 05:41 PM Steve You don't need a hole to adjust or replace the... Aug 15 2017, 05:58 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th June 2024 - 04:33 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.