 What size are the oil line fittings? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| Joe Bob |
 Apr 8 2004, 06:04 PM
Post
#1
|
|
Retired admin, banned a few times  Group: Members Posts: 17,427 Joined: 24-December 02 From: Boulder CO Member No.: 5 Region Association: None  |
On the two from the 914/6 oil tank and the oil line coming off the block? My mind is fading in my old age....BTW....I will be cutting the one coming off the engine cooler and soldering on a 90 to clear the swing arm...
Are they (2) 30mm and (1) 26mm with a 1.5 pitch? I am looking at BAT in Florida that carries the XRP conversion fittings.....to -12AN.....looks like HPH is having a hard time getting them from their supplier.... Also....do any of them need a 45 or 90 bend? Been ahwile since I had to plumb one of these.... Also...anyone have an oil console, cap, dipstick and filler neck? Early 911 stuff works....so if ya have an old crappy tank laying around..... |
   |
 
|
| TimT |
Apr 8 2004, 06:11 PM
Post
#2
|
|
retired Group: Members Posts: 4,033 Joined: 18-February 03 From: Wantagh, NY Member No.: 313 |
Pegasus sells the adapters...
Are you just looking for the -AN to metric adapters? If so I have an unused male and female set... |
|
|
|
| TimT |
Apr 8 2004, 06:15 PM
Post
#3
|
|
retired Group: Members Posts: 4,033 Joined: 18-February 03 From: Wantagh, NY Member No.: 313 |
Oh yea I have and early 911 ('70) console, and filler neck.. Im sure I can scrounge the dipstick up
I have the early 911 oil tank but it has "impact" damage LOL |
|
|
|
| Joe Bob |
Apr 8 2004, 06:15 PM
Post
#4
|
|
Retired admin, banned a few times Group: Members Posts: 17,427 Joined: 24-December 02 From: Boulder CO Member No.: 5 Region Association: None |
Yeah....need any 914 parts in trade?
Here's the fittings I have used in the past... http://www.batinc.net/files/ahosend.pdf Email me please.... 356@cox.net Send me your telephone # and I will call ya.... Thanks |
|
|
|
| Joe Bob |
Apr 8 2004, 07:14 PM
Post
#5
|
|
Retired admin, banned a few times Group: Members Posts: 17,427 Joined: 24-December 02 From: Boulder CO Member No.: 5 Region Association: None |
Still need the fitting sizes....
Anyone??? (IMG:style_emoticons/default/blink.gif) Bueller? Ferris Bueller? |
|
|
|
| TimT |
Apr 8 2004, 07:27 PM
Post
#6
|
|
retired Group: Members Posts: 4,033 Joined: 18-February 03 From: Wantagh, NY Member No.: 313 |
sheesh
30mmx1.5mm to either -12 or -16 |
|
|
|
| Joe Bob |
Apr 8 2004, 07:48 PM
Post
#7
|
|
Retired admin, banned a few times Group: Members Posts: 17,427 Joined: 24-December 02 From: Boulder CO Member No.: 5 Region Association: None |
That I know....but are they ALL that size? I thought one was a 26mm.....
The tank and engine are at the garage....won't see them until next week.....Easter, kids and work,,,,, (IMG:style_emoticons/default/headbang.gif) |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 20th May 2024 - 07:23 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.