Original 1970 914/6 Value & a '71 914/6 Clone Options

[mtbr_mark]

Hi guys. I posted this in the classifieds section as well but was encouraged to post it in the garage too. I recently helped a friend finish a 1971 conversion where we put a 2.7 in. This car is complete with 5 lug axles, upgraded Bilstein suspension, the works. I'm looking for some advice though. My friend Chuck just passed away from esophageal cancer at the age of 61. As an avid auto enthusiast he had three Porsches to his name when he passed away; a 2010 Boxster, the 1971 914/6 clone that we built, and then his original 1970 914/6. His wife asked me if I would be willing to help her sell the two 914s so of course I said that I would. My question is this...can you guys give me a ballpark for what to be asking for each? I'll have to dig up some more details for everyone on the original 6 but I do know that he ended up pulling the 2.0 stock six that was in there and replaced it with a 3.0 as well as a very built transmission. So again, just looking for some direction on the value of these cars before we move on too far.

Thanks in advance,
Mark

[Tom_T]

Okay Six-perts out there - help him out ...... (IMG:style_emoticons/default/poke.gif)
(IMG:style_emoticons/default/popcorn[1].gif)

[Jeffs9146]

It would help to see detailed photos!

Does the original 6 still have the 2.0L included out of the car? Is the trans an original 6 trans? How is the Hell Hole rust and the over all condition of the car? $10K - $40K or more!

Conversions can be all over the map but a well sorted one can go for good money depending on what kind of details and restorations were done in the process! $8K - $30K!

So photos and details!

[Eric_Shea]

Mark,

Best to find someone who can actually set eyes on the cars. The Boxster is probably as simple as checking used values among like years and mileage.

The 914's are a little more difficult and varying factors include much of what Jeff states. A well done conversion can command a high price. A rusty six might go for a low price. Numbers matching helps and the values are going up as the rest of the Porschephiles are waking up to these fun little cars.

Where in OR are you? If you're along the corridor then it's possible some experts may drive by as they head to Rennsport Reunion mid-October.

Detailed pictures here would definitely help but, even then, I'd be willing to bet you'll get prices all over the map.

Main thing to do is "wait" for a real appraisal from someone who knows these cars.

[carr914]

Okay Six-perts out there - help him out ...... (IMG:style_emoticons/default/poke.gif)
(IMG:style_emoticons/default/popcorn[1].gif)

I put my comments in the Classifieds Thread - maybe an Admin can combine the 2 Threads

[Cairo94507]

Hello Mark,

Sorry for the loss of your friend. I have to agree with Eric, be patient and wait for some appraisals from people in the know re these cars. There are lots of people looking to pick these up and steal them if possible from uninformed sellers. So unless the widow is in financial distress and just has to have the money ASAP, be patient and set the price according to the market.

I would love to see pictures and lots of them, of the '70 six with as much detail as you can provide about the car and condition. How long your friend owned it, the number of owners, the mileage and if the odometer was/is working, receipts, owner's booklets, tool kit, etc.

Also notes re any modifications that are apparent in addition to the 3.0 and transaxle. Like headers, GT flares, wheels, and such.

Looking forward to seeing some pictures and good luck. Very nice of you to step-up and help your friend's wife.

[Tom_T]

FYI All - here's the link to his other post in the classifieds where TC & others have also replied. I agree it would be best if they could be merged here, but don't know if that's even possible.

http://www.914world.com/bbs2/index.php?showtopic=144955

.

Mark - if you go to the website below & put in you zip code, then the car info, then it will give you'll get what the car dealers use for pricing info., as well as looking at the info at the Excellence link below that. (IMG:style_emoticons/default/type.gif)

NADA = Nat'l Auto Dealers' Assn. link:
http://www.nadaguides.com/Classic-Cars
FYI for my SoCal zip 92867 it gives for the 70/6: $21,100 $24,500 $31,400

Excellence on 914 values:
http://www.excellence-mag.com/resources/bu...guide/856880138
... some come up here, but there are many more if you Google & check other classifieds, etc. -
http://www.excellence-mag.com/classifieds?...mp;to_year=1972

These are only ballparks & generalities, so what Eric & the others are saying is the real answer. Also if the original "numbers matching" 6 motor & transaxle are still available in your buddy's parts stash, that adds value to the original 70 /6 - so don't sell those off separately. Pix help too.

Even if estimates are all over the place - the actual value will be what you/his widow settle on to sell, since the actual buyer & seller will make the market - not any experts.

Out of curiosity - what color is the 1970 914-6 now & originally (if changed)? (IMG:style_emoticons/default/confused24.gif)

Good Luck! (IMG:style_emoticons/default/beerchug.gif)
///////

[mtbr_mark]

It would help to see detailed photos!

Does the original 6 still have the 2.0L included out of the car? Is the trans an original 6 trans? How is the Hell Hole rust and the over all condition of the car? $10K - $40K or more!

Conversions can be all over the map but a well sorted one can go for good money depending on what kind of details and restorations were done in the process! $8K - $30K!

So photos and details!

I'll have photos for everyone to see tomorrow evening. Don't hold me to these details until I can double check tomorrow since it's all from memory right now but here's what I can say of both (I'll have more info on the clone since I built it). And I apologize now if my descriptions are a bit naive or off, but I'm still new to the Porsche world.

Some Back Story on the Owner
Chuck McCart was an E.R. Doctor with more people biding for his time than his heart could say no to. Always quick to help anyone with a need he found himself working looong hours everyday at the hospital as well as serving as medical director and adviser for multiple organizations. He was a man who was incredibly meticulous about everything that he did. I think largely in part because of his background as a helicopter pilot and Doctor. He flew through Vietnam as a young man and then returned to the states to run his own helicopter based fire fighting business, and then at 37 went to medical school to become a doctor. He was a lover of anything that went fast. Sports cars (including his 914s, Boxster, and AC Shelby Cobra), airplanes, and helicopters were his passions.

Real 1970 914-6
- Red exterior (and I believe that years ago it was yellow)
- Black interior
- GT Flares
- Currently has a 3.0L with 40mm Webers
- Original 2.0L is included as well. It seized up when installed in the '71 clone as the diagram that came with our fender mounted oil tank showed the lines plumbed backwards. Consequently when we started it up, it ran it for about 30 seconds, then stopped and would not turn over at all. Extent of internal damage is unknown. Could be minor, could be major. We opted to pull the motor and go a different route rather than tear into and rebuild this one. But we do still have it and it will be included with the car if wanted.
- Momo steering wheel
- Transmission has been greatly improved from everything that Chuck had told (he was extremely proud of how it was built) me but I don't remember the extent of work done to it. Hopefully the pictures tomorrow will be clear as day for those of you who know more about these than I do.
- 4-Point belts
- Front trunk mounted oil cooler with oil lines plumbed in the driver side rocker panel
- 2-piece BBS Wheels (the original Fuchs are on the clone)
- Custom built and tuned stainless steel exhaust
What's wrong
I haven't seen this car run in a couple years namely because of Chuck's extremely busy schedule. Before parking it though he frequented any track days he could get to as well as running at Laguna Seca Raceway as I'm sure many of you have as well. There is a significant oil leak of some sort as there was a substantial amount of oil under it at one point (possibly a cracked oil line if I had to guess)

1971 914-6 CLONE
- Red exterior (the car was blue at one point as evidenced by the blue paint on the underside of the rear trunk)
- Black Interior
- Mild Flares
- 2.7L out of a 911 with 40mm Weber carbs
- Firewall welded motor mount with sportmount bushings
- Oil tank in 914-6 fashion is mounted in the driver side fender well
- Sideshift transmission with new shift rod bushings at the firewall and end of shift rod where it connects to the transmission
- High-performance axles
- 5 lug hubs
- Fuchs wheels from the 914-6
- Upgraded coilovers (I'll check what springs and shocks they are)
- Second oil cooler is mounted in the rear passenger fender well with a 6” thermostatically controlled electric fan
- Upgraded electric fuel pump
- Engine bay is painted satin black and engine is a black and red scheme. Most everything that's red on the engine has been powdercoated, not painted
- MSD Ignition
- Brand new Bursch tuned exhaust
- Hell Hole has been cut out and replaced with new sheetmetal welded in
- New heater flapper boxes on the exhaust
- Fuse box has been replaced with modern fuse block
What's wrong
- Two things. Before being diagnosed Chuck noticed that one of the headlights would sometimes stick when opening so he took both of them apart and didn't get a chance to reinstall them. And while putting some miles on it after finishing the build we noticed that the handling just wasn't perfect. When we took it in for an alignment they said that it had a bent strut. Again, with plans of replacing it, Chuck removed the front driver side strut and hadn't had a chance to replace it before things went south.

Again, I'll take loads of pictures tomorrow and get those up. I agree that it would be in our best interest to get better educated opinions from people more engrossed in this line of cars. And no, Gail isn't pressed to sell these. She just doesn't have a need for them or any strong sentimental attachment so she asked if I would be willing to see if I might be able to help her sell them. They were Chuck's babies. Thanks again for all the input and advice everyone.

[mtbr_mark]

From the research that we've done, as of now what we've been considering for prices would be...

$17,000 for the Clone
$35,000 for the 914-6

Like I said though, I'll get some pictures up tomorrow evening and then you guys can tell me if we're way off in left field or somewhere in the ballpark. I think so far that these prices are realistic and fair.

[Eric_Shea]

When this turns back into a For Sale thread, we'll have to move it back to the classifieds.

[RickS]

I was recently offered $30K for my narrow body '71 6 with a new 3.0, with full Elephant suspension, side shift, 6 and 7s 5 lug Fuchs, early S brakes, with no rust, SSIs, excellent interior and exterior - I would guess about an 8 point car. The money can be had if the car is right and you find the right buyer. I am not selling - the car is just too much fun.

[mtbr_mark]

When this turns back into a For Sale thread, we'll have to move it back to the classifieds.

Deal. Let me get some pictures up tomorrow and then I'd love it if we could do that. Thank you again for all the help.

[mtbr_mark]

I was recently offered $30K for my narrow body '71 6 with a new 3.0, with full Elephant suspension, side shift, 6 and 7s 5 lug Fuchs, early S brakes, with no rust, SSIs, excellent interior and exterior - I would guess about an 8 point car. The money can be had if the car is right and you find the right buyer. I am not selling - the car is just too much fun.

Rick,
That sounds like a great machine. Hopefully someone will see the same value in ours as well.

[sixerdon]

Here is a good resource that will help you understand the asking price and sales history of 914/6's.

http://www.pbase.com/9146gt/sales_history_9146_916

Good Luck.

Don

[mtbr_mark]

Here is a good resource that will help you understand the asking price and sales history of 914/6's.

http://www.pbase.com/9146gt/sales_history_9146_916

Good Luck.

Don

Wonderful resource! Thanks Don.

[Tom_T]

Here is a good resource that will help you understand the asking price and sales history of 914/6's.

http://www.pbase.com/9146gt/sales_history_9146_916

Good Luck.

Don

Ooops! I forgot that one, it's really good with pix of the actual 914-6s. (IMG:style_emoticons/default/idea.gif)

It also won't hurt to do a "Porsche 914-6" searches in the classifieds here, 914club.com, ClubNARP.com, Pelican's website classifieds, TheSamba.com, PCA.org (Porsche Club of America), Excellence Magazine's classifieds (I gave the link above), LemonFree.com & Lycos.com, etc. - if you haven't done so yet. Those are also good places to list FS to expand your reach.

You may want to start with a "clean" FS thread in the classifieds to eliminate all of our chatter, and just focus on the cars, info. & pix there. You can always put in a link to this one, but I don't know that it helps buyers necessarily, because it's like talking to 10 lawyers - you get 100 "opinions"! (IMG:style_emoticons/default/biggrin.gif)

Good Luck! (IMG:style_emoticons/default/beerchug.gif)

[PanelBilly]

The real money is in the /6 put back to original condition. Sounds like that won't be easy. Its important to determine if the 2.0 block is still usable.

[mtbr_mark]

The real money is in the /6 put back to original condition. Sounds like that won't be easy. Its important to determine if the 2.0 block is still usable.

I agree that there would be greater money if that were done but I don't think that Gail's wanting to deal with the hassle of a project like that at this time in life. We'd rather find someone that appreciates it for how it's built now even if that means a lower sticker price.

[carr914]

I think as long as you have the Original Engine Case, you will be OK.

I have a 2.8 Twin-Plug in my car, but my Original Case is on a shelf. there are a lot of guys that do this.

[RFoulds]

the Boxster, check value on kbb.com

for 914-6, and any 914, I like to check EBay and search for that car, and "Completed Auctions" That way you see the price it sold for, NOT the asking price.