Plaid insert seat materials or kits available as a 4 pcs kit fully sewn, Going plaid? got you covered GB over |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Plaid insert seat materials or kits available as a 4 pcs kit fully sewn, Going plaid? got you covered GB over |
Mikey914 |
Oct 23 2014, 01:58 AM
Post
#1
|
The rubber man Group: Members Posts: 12,677 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
I was asked some time ago to help out in getting these material made. I finally got off my butt and pulled the trigger on this. I have 7 for the 9 in stock and will have the other 2 late next week.
Materials will run per yard. Or I can have kits sewn up as shown. All 4 pcs $125, + the materials cost. It is recommended you purchase 2 yards to get the sections to line up properly, does burn up material. I will sell sample cards for $25 each that have 3" square samples. If you buy the $25 will be credited to your purchase. I plan to have the GB open til Dec 10th, so if you are looking for a Christmas gift for your car this might be the thing. I sent a kit out to Ken, he should have Friday. Material is $127 per yard If you have us do the 4 pcs kit it will take 2 yards for all 4. Attached image(s) |
GregAmy |
Oct 28 2014, 09:42 AM
Post
#2
|
Advanced Member Group: Members Posts: 2,311 Joined: 22-February 13 From: Middletown CT Member No.: 15,565 Region Association: North East States |
Thank you, Mark, appreciate the efforts (and patience).
On a bit of a non-sequitur, anyone offer some internal links on vinyl dyeing? If I got this route, I'll need to dye the current brown interior to a somewhat-matching black. Seat bolsters, door card, center cushion, and rear bakc pad are all in surprisingly good condition, just the incorrect color. |
Mikey914 |
Oct 28 2014, 10:04 AM
Post
#3
|
The rubber man Group: Members Posts: 12,677 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
Thank you, Mark, appreciate the efforts (and patience). On a bit of a non-sequitur, anyone offer some internal links on vinyl dyeing? If I got this route, I'll need to dye the current brown interior to a somewhat-matching black. Seat bolsters, door card, center cushion, and rear bakc pad are all in surprisingly good condition, just the incorrect color. Why not just package them up and replace with all new material? It costs more, but you effectively have a 2nd interior that could be sold if you want. Brown is a harder color to come by so for a correct brown interior it may be worth just holding onto. But there are commercial vinyl dyes SEM makes some that I'm aware of. |
Lo-Fi Version | Time is now: 3rd June 2024 - 01:37 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |