NEW Group Buy 914 Master Cylinders $110 each, GB CLOSES TODAY 11/15/17 The rest will ship by 11/2 |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
NEW Group Buy 914 Master Cylinders $110 each, GB CLOSES TODAY 11/15/17 The rest will ship by 11/2 |
76-914 |
Nov 4 2017, 05:41 PM
Post
#261
|
Repeat Offender & Resident Subaru Antagonist Group: Members Posts: 13,494 Joined: 23-January 09 From: Temecula, CA Member No.: 9,964 Region Association: Southern California |
Update on the Easy Kit. I went to do installation instructions today and noted that one of the components was not optimal. It’s the nipple closest to the foot pedal bulkhead. . We did clear the bulkhead t, but the hose was close enough that it was not an ideal install. We are re-machining these right now and will ship the rest out this last week. For those of you that we have shipped. We will send you the corrected part. We also included the splice hoses longer than you needed as they can be cut to length, but we will be finalizing the cut length to make for minimal cutting. I appreciate your patience, we had been focused more on the master cylinder itself and the CQ for operation prior to shipping, and even though I had measured this all out before I had not allowed for the hose being installed. I have Taylor working on these this weekend and Carry will be helping to get the installation pics so we can show you the how to. Sincerely, Mark In that case I'm glad I haven't received mine yet! (IMG:style_emoticons/default/laugh.gif) |
Mikey914 |
Nov 4 2017, 09:34 PM
Post
#262
|
The rubber man Group: Members Posts: 12,649 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
Actually had Cary I stall today. And we're modifying these to start you g out Wed. Thanks all. I just need to get the pics from Cary and I'll get the instructions done up too.
|
02loftsmoor |
Nov 6 2017, 12:02 PM
Post
#263
|
Senior Member Group: Members Posts: 577 Joined: 26-June 11 From: Ft. Worth TX Member No.: 13,243 Region Association: Southwest Region |
I've got my new Cylinder, I'm think I missed something, I do I need to buy the fitting kit?
|
sb914 |
Nov 6 2017, 01:04 PM
Post
#264
|
Surf Guru Group: Members Posts: 4,296 Joined: 25-November 12 From: Brookings,Oregon Member No.: 15,191 Region Association: Southern California |
|
RoadGlue |
Nov 6 2017, 01:08 PM
Post
#265
|
Sonoma County Gear Head Group: Admin Posts: 2,033 Joined: 8-January 03 From: Santa Rosa, CA Member No.: 108 Region Association: Northern California |
|
Mikey914 |
Nov 6 2017, 03:23 PM
Post
#266
|
The rubber man Group: Members Posts: 12,649 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
I've got my new Cylinder, I'm think I missed something, I do I need to buy the fitting kit? I can check, a few didn't opt for the easy option that decided they wanted it. Drop me a PM with your last name I can check. We will allow for a upgrade after the fact, but you'll need to send the stock version back as it's not interchangeable. If its our mistake we will cover the postage back too. Just PM me we can get you what you need. Thanks, Mark |
restore2seater |
Nov 13 2017, 04:33 PM
Post
#267
|
Future 914 copilot. Group: Members Posts: 311 Joined: 30-October 04 From: Dunlap,IL Member No.: 3,037 Region Association: None |
Any update, Mark?
|
Mikey914 |
Nov 14 2017, 12:51 AM
Post
#268
|
The rubber man Group: Members Posts: 12,649 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
Got the modified kit finalized and installed in my car. Doing instructions tomorrow. Been out at the day job since Friday. I'll be checking in and posting tomorrow. I know we are close on having all the pieces ready and will update delivery schedule.
Mark |
Mikey914 |
Nov 15 2017, 09:56 AM
Post
#269
|
The rubber man Group: Members Posts: 12,649 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
Unfortunately, things got a little behind in my absence. The schedule to complete and have tested will put these just after thanksgiving. Look for these to ship the 27th. If we can get them earlier we will, but best to be done right.
Sincerely, Mark W We will be closing out the GB today as the end of the production run is eminent. |
Mueller |
Nov 15 2017, 11:56 AM
Post
#270
|
914 Freak! Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None |
Unfortunately, things got a little behind in my absence. The schedule to complete and have tested will put these just after thanksgiving. Look for these to ship the 27th. If we can get them earlier we will, but best to be done right. Sincerely, Mark W We will be closing out the GB today as the end of the production run is eminent. Too late to get on it then? Saw that you are backdated on your website. ETA on new batch? |
Mikey914 |
Nov 15 2017, 04:43 PM
Post
#271
|
The rubber man Group: Members Posts: 12,649 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
PM's sent
|
GregAmy |
Nov 15 2017, 04:57 PM
Post
#272
|
Advanced Member Group: Members Posts: 2,283 Joined: 22-February 13 From: Middletown CT Member No.: 15,565 Region Association: North East States |
Sorry if I missed it earlier in the thread, but is there a way to visually identify while on the car what MC is in it? I'm sure the street car has the original, but I want to know about the race car, which has shown itself to have a history of minor "regs-questionable" mods... (IMG:style_emoticons/default/wink.gif)
|
Chris914n6 |
Nov 15 2017, 08:09 PM
Post
#273
|
Jackstands are my life. Group: Members Posts: 3,307 Joined: 14-March 03 From: Las Vegas, NV Member No.: 431 Region Association: Southwest Region |
I'd like one too with the easy option.
|
Mikey914 |
Nov 15 2017, 10:00 PM
Post
#274
|
The rubber man Group: Members Posts: 12,649 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
PMs sent
|
914six |
Nov 16 2017, 12:50 AM
Post
#275
|
Newbie Group: Members Posts: 28 Joined: 29-March 10 From: Los Angeles, CA Member No.: 11,521 Region Association: Southern California |
hello,
i would like a 19mm master cylinder with the easy option.. can paypal you or give you my cc#.. Thanks, Harry porschesix2003@yahoo.com |
drem914 |
Nov 18 2017, 09:43 AM
Post
#276
|
Senior Member Group: Members Posts: 1,030 Joined: 16-May 08 From: Trabuco Canyon, CA Member No.: 9,062 Region Association: Southern California |
Unfortunately, things got a little behind in my absence. The schedule to complete and have tested will put these just after thanksgiving. Look for these to ship the 27th. If we can get them earlier we will, but best to be done right. Sincerely, Mark W We will be closing out the GB today as the end of the production run is eminent. So shipping on these will take place after thanksgiving on all orders placed under the first and second wave of GB with the "easy kit option" included? |
Mikey914 |
Nov 19 2017, 12:41 PM
Post
#277
|
The rubber man Group: Members Posts: 12,649 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
No not quite correct.
We are wrspping rhese up. We have an outside company running QC and are somewhat at the mercy of thier schedule. Thrse are supposed to be ready this week, so maybe some will run into Thanksgiving. Also the easy kit IS AN OPTION, You have to select it. Because the body is machined differently you cant just add it onto the base model. We will take exchanges back for full credit and allow you to upgrade it if there is any confusion. |
Shadowfax |
Nov 19 2017, 04:30 PM
Post
#278
|
Show us the meaning of haste Group: Members Posts: 509 Joined: 19-January 15 Member No.: 18,340 Region Association: South East States |
Mine arrived yesterday. Thanks, Mark.
|
76-914 |
Nov 19 2017, 09:17 PM
Post
#279
|
Repeat Offender & Resident Subaru Antagonist Group: Members Posts: 13,494 Joined: 23-January 09 From: Temecula, CA Member No.: 9,964 Region Association: Southern California |
Me too. It's still in the box and will be for the next several months but what a deal. (IMG:style_emoticons/default/beerchug.gif)
|
02loftsmoor |
Nov 19 2017, 10:02 PM
Post
#280
|
Senior Member Group: Members Posts: 577 Joined: 26-June 11 From: Ft. Worth TX Member No.: 13,243 Region Association: Southwest Region |
what is the easy kit???
|
Lo-Fi Version | Time is now: 2nd May 2024 - 10:54 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |