 cleaning the trans..., anyone know.....? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| xsboost90 |
 May 5 2005, 03:15 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,393 Joined: 2-August 04 From: cincinnati Member No.: 2,432  |
decided to clean my trans last nite and came across some numbers on the bottom, anyone know what they refer to? It also has a "socket" that the ball on the trans pops into on the fork for the throwout bearing, does this need to fit real tight or can it have alittle play, i took it all apart and cleaned it but even when the alan bolt is tight the arm has some play in it.
Im going to clean alittle more and change to mobil 1 90w fluid tonite, almost ready to attach it to the motor!!! Attached image(s) 
|
   |
 
|
Posts in this topic
xsboost90 cleaning the trans... May 5 2005, 03:15 PM
xsboost90 after May 5 2005, 03:15 PM xsboost90 oh, heres the numbers May 5 2005, 03:18 PM Eric_Shea Ooooooops... looks like I might be too late. I wa... May 5 2005, 03:18 PM xsboost90 what should be used to clean it. I used about five... May 5 2005, 03:23 PM Eric_Shea Engine cleaner pits the magnesium. You can see it... May 5 2005, 03:27 PM xsboost90 really ill be happy as long as i dont get dirty wh... May 5 2005, 03:29 PM Ferg change the fluid before it goes back in the car, f... May 5 2005, 03:37 PM James Adams ... May 5 2005, 04:34 PM TimT Mobil 1 isnt the best choice of gear lube for 901... May 5 2005, 06:15 PM C.Plavan Not a 914 but here is a picture of my 901 in my 91... May 5 2005, 10:00 PM messix looks great
now i need a blasting cabnet May 5 2005, 10:16 PM Eric_Shea A fairly large blasting cabinet. May 6 2005, 09:54 AM davep Before power washing, take a note of the exact ori... May 6 2005, 10:05 AM xsboost90 after i blasted it off, careful not to stick the w... May 6 2005, 11:37 AM
C.Plavan I should add I did this with the trans apart. Not... May 6 2005, 11:54 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th May 2024 - 12:31 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.