 Steering column slop |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| LCOX |
 Aug 15 2017, 12:23 PM
Post
#1
|
|
Member  Group: Members Posts: 93 Joined: 19-December 09 From: Pinnacle Member No.: 11,148 Region Association: None  |
74 914. The steering column shaft has typical slop in it. The previous owner installed the metal "crush bushing" but there is still up and down slop in the shaft. The column is attached firmly. What next? Do I need a new steering column bearing that crush bushing slides into? If so what is the part number. Anything else that can cause this? Thanx L
|
   |
 
|
Posts in this topic
LCOX Steering column slop Aug 15 2017, 12:23 PM
914Sixer The center crush bushing is ONLY a replacement for... Aug 15 2017, 01:32 PM markhoward Mitch Leland makes a replacement bushing.
http:... Aug 15 2017, 01:50 PM Vacca Rabite I made a bushing spacer out of steel pipe couplers... Aug 15 2017, 02:02 PM
jim_hoyland
I made a bushing spacer out of steel pipe coupler... Aug 15 2017, 02:14 PM Vacca Rabite
I made a bushing spacer out of steel pipe couple... Aug 16 2017, 01:19 PM SirAndy I have a tapered wavy metal sleeve that slides ove... Aug 16 2017, 01:31 PM Vacca Rabite http://www.914world.com/bbs2/uploads_offsite/c1.st... Aug 16 2017, 06:44 PM jim_hoyland Thanks for the pic; great solution ! :) Aug 17 2017, 05:54 AM Philip W. i just replaced the bushing about a month ago whe... Aug 17 2017, 06:55 AM Philip W. picture of old and new bearing Aug 17 2017, 07:01 AM Philip W. new bearing in place, zero slop
there is a retaini... Aug 17 2017, 07:02 AM Philip W. should have postes this first but it shows the gap... Aug 17 2017, 07:16 AM jim_hoyland Do you grease/lube the shaft when installing the B... Aug 17 2017, 07:37 AM Philip W.
Do you grease/lube the shaft when installing the ... Aug 17 2017, 07:50 AM Krieger Dang, look at the remnants of the worn out parts b... Aug 17 2017, 07:42 AM Philip W.
Dang, look at the remnants of the worn out parts ... Aug 17 2017, 08:07 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th May 2024 - 08:44 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.