 Time to start the SIX... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Kerrys914 |
 Jun 14 2005, 11:54 AM
Post
#41
|
|
Dear, the parts I just sold paid for that part ;)  Group: Members Posts: 1,568 Joined: 26-December 02 From: Williamsburg, VA Member No.: 16  |
(IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif) I just got my fuel pump TODAY and I will be starting the SIX up ASAP. I would like to here some tip/thoughts on;
- How long should I run it - What RPM I installed new rings, had some top end work done, rebuilt the webers..etc I am hoping it will fire right up but who knows? The carbs are more then likely not dialed in but should be close, timing will be close (I set it at TDC). Once it is started should I immediately start tuning it? Timing and then the carbs? (IMG:http://www.914world.com/bbs2/html/emoticons/wacko.gif) Should I stop it to check the plug color to make sure I am not running too lean/rich? Cheers (IMG:http://www.914world.com/bbs2/html/emoticons/driving.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/driving.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/driving.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/beerchug.gif) |
   |
 
|
Posts in this topic
Kerrys914 Time to start the SIX... Jun 14 2005, 11:54 AM
brant Just my $.02 so don't take this as gospel... Jun 14 2005, 12:34 PM Series9 1: Remove spark plug from the cylinder of your ch... Jun 14 2005, 01:01 PM Root_Werks Jun 14 2005, 01:41 PM trekkor That chopstick thing was classic. Jun 14 2005, 03:56 PM scott thacher http://www.914world.com/bbs... Jun 17 2005, 07:04 AM redshift uhoh Jun 17 2005, 07:12 AM Kerrys914 http://www.914world.com/bbs... Jun 17 2005, 04:54 PM banksyinoz mate that is the risk ,secondhand electrics the co... Jun 17 2005, 05:03 PM TimT The xr700 can be used to fire the stock CD box, g... Jun 17 2005, 05:18 PM Kerrys914 The wiring wasn't too bad. That is why I am un... Jun 17 2005, 05:56 PM sixnotfour Damn , I was hoping for the OH YA She fired,
Inste... Jun 17 2005, 06:53 PM xsboost90 hey man dont sweat it! I had the same problem,... Jun 17 2005, 07:14 PM Kerrys914 Thanks..
I tested the XR 700 signal and it is the... Jun 17 2005, 07:31 PM ArtechnikA http://www.914world.com/bbs... Jun 18 2005, 06:52 PM trekkor You just want to run the motor on the test bench, ... Jun 18 2005, 07:18 PM Kerrys914 ???KT?????
I don't need a CDI?? Details Why ... Jun 19 2005, 07:34 AM ArtechnikA http://www.914world.com/bbs... Jun 19 2005, 05:43 PM Kerrys914 How doe sthis look? Jun 20 2005, 07:22 AM trekkor I'm not sure, but I think the switched ( key o... Jun 20 2005, 09:00 AM Kerrys914 The diagram above is without the CDI...Just the po... Jun 20 2005, 09:08 AM Kerrys914 CDI or HI-6 Jun 20 2005, 09:10 AM sixnotfour The fuel pump shouldn't run off of the ignitio... Jun 20 2005, 09:11 AM ArtechnikA http://www.914world.com/bbs2/html/e... Jun 20 2005, 10:01 AM ArtechnikA one other thing to add...
the heavy red and black... Jun 20 2005, 11:46 AM Kerrys914 Well I am shipping the whole Crane setup off to Cr... Jun 20 2005, 04:28 PM Kerrys914 http://www.914world.com/bbs2/html/e... Jun 29 2005, 08:43 AM ArtechnikA http://www.914world.com/bbs2/... Jul 9 2005, 03:57 PM ArtechnikA ... Jul 9 2005, 04:11 PM Kerrys914 I have a small video of it running and you can hea... Jul 9 2005, 04:16 PM Kerrys914 Timing is set close to 30deg @ 3000RPM (Best I can... Jul 9 2005, 04:18 PM TimT T engines are timed at 35deg @ 6000rpm
E & S are ... Jul 9 2005, 04:28 PM Kerrys914 Well it WAS the timing. I forgot I marked TDC to h... Jul 9 2005, 06:53 PM TimT 
