![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
Mikey914 |
![]() ![]()
Post
#1
|
The rubber man ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 12,772 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None ![]() ![]() |
So we have Rob's tread showing the prototype installed in his rig. I'm really quite happy how these turned out. We have quite a few folks that have stepped up to help support the cause and signed up on Rob's thread. Thought I should make it official and open a thread since someone has "let the cat out of the bag".
A little about the product and process These are a self skinning rubber product that takes the texture off of the mold, so the tooling has the grain in it. This is how we make the dash tops. The big difference is that unlike the dash we were able to mold off of an original this one we had to scan and create a pattern that was cut into the tool. This is one of the reasons this tool has taken so long. There were quite a few problems we had to overcome, but we are ready to introduce the product now. We are maybe 6 weeks out on the 1st parts shipping as we have materials inbound and it may take a bit to get it and schedule everything to move forward. Think Mid march and they will be shipping give or take a week. The cost on these for the Group buy will be $128 until they start shipping, after and when in production they will be $148, The full retail will be $240 on these once the GB is done. SO if you are interested sign up here ! I'm also putting together a "hardware kit" that will include new mounting screws that fit with a larger phillips head (making easier to remove later) and the new screw covers needed for $5.80 for those that need them (with the GB) no need to decide now. From the other thread I have the following I will be notifying when ready. I do have some with question marks that I'm not sure if you are in but can send the info when ready. So far I have the following that are interested orthobiz ? JamesM TJB/914 ? scallyk9 wes Jett MM1 ? Rleog jim_hoyland ? pete000 yeahmag mmichalik rick 918-S ValcoOscar JamesM ? iankarr 76-914 dt4 ? tscrihfield bigkensteele ? JeffBowlsby ? tyfighter123 Nacho windforfun ? horizontally-opposed bob164 PCH Pappy1975 914Sixer Wew Jack Standz bahnzai double-a scallyk9 timothy_nd28 frostyf davehg 914Toy Steve BeatNavy 56kabrio tyfighter123 Front yard mechanic PS I have AA's roll bars on sale at $95 for those that want them. I'll get some pictures of them up so you can see the difference Attached thumbnail(s) ![]() Attached image(s) ![]() ![]() ![]() |
![]() ![]() |
bbrock |
![]()
Post
#2
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 5,269 Joined: 17-February 17 From: Montana Member No.: 20,845 Region Association: Rocky Mountains ![]() ![]() |
I'm in for one. Thanks Mark.
|
914dave |
![]()
Post
#3
|
914 Addict ![]() ![]() ![]() Group: Members Posts: 723 Joined: 19-October 03 From: Willow Grove Pa. Member No.: 1,262 Region Association: North East States ![]() ![]() ![]() |
I’m in for one with hardware !
|
Jett |
![]()
Post
#4
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,683 Joined: 27-July 14 From: Seattle Member No.: 17,686 Region Association: Pacific Northwest ![]() ![]() |
I’ll take at least one
|
seanpaulmc |
![]()
Post
#5
|
Member ![]() ![]() Group: Members Posts: 382 Joined: 6-December 16 From: Orlando, FL Member No.: 20,649 Region Association: South East States ![]() ![]() |
I'm in for one. And, a hardware kit.
Thanks, |
dlee6204 |
![]()
Post
#6
|
Howdy ![]() ![]() ![]() ![]() Group: Members Posts: 2,162 Joined: 30-April 06 From: Burnsville, NC Member No.: 5,956 ![]() |
I'm in.
|
Dion |
![]()
Post
#7
|
RN ![]() ![]() ![]() ![]() Group: Members Posts: 2,901 Joined: 16-September 04 From: Audubon,PA Member No.: 2,766 Region Association: MidAtlantic Region ![]() ![]() ![]() |
In for one and the hardware kit.
|
live free & drive |
![]()
Post
#8
|
Member ![]() ![]() Group: Members Posts: 194 Joined: 29-June 16 From: New Hampshire Member No.: 20,159 Region Association: None ![]() ![]() |
I'm in for one too! A hardware kit too.
|
ClayPerrine |
![]()
Post
#9
|
Life's been good to me so far..... ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 16,414 Joined: 11-September 03 From: Hurst, TX. Member No.: 1,143 Region Association: NineFourteenerVille ![]() ![]() |
One and the hardware kit please.
|
76-914 |
![]()
Post
#10
|
Repeat Offender & Resident Subaru Antagonist ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 13,734 Joined: 23-January 09 From: Temecula, CA Member No.: 9,964 Region Association: Southern California ![]() ![]() |
I'll need 2 Mark. LMK when & where to send the $$$. Thx for making these. (IMG:style_emoticons/default/beerchug.gif)
|
mepstein |
![]()
Post
#11
|
914-6 GT in waiting ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 19,952 Joined: 19-September 09 From: Landenberg, PA/Wilmington, DE Member No.: 10,825 Region Association: MidAtlantic Region ![]() ![]() |
I'll take 2 please.
|
ValcoOscar |
![]()
Post
#12
|
Garage Life ![]() ![]() ![]() ![]() Group: Members Posts: 2,528 Joined: 19-November 13 From: SoCal Member No.: 16,669 Region Association: Southern California ![]() ![]() ![]() |
Three (3) for ME (IMG:style_emoticons/default/biggrin.gif)
And Smoke gray top when it becomes available O |
mb911 |
![]()
Post
#13
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,592 Joined: 2-January 09 From: Burlington wi Member No.: 9,892 Region Association: Upper MidWest ![]() ![]() |
I want one.
|
bahnzai |
![]()
Post
#14
|
Member ![]() ![]() Group: Members Posts: 340 Joined: 26-July 06 From: Columbia, SC Member No.: 6,509 Region Association: South East States ![]() ![]() |
I'm in for one. And, a hardware kit too.
Can we order on the website now? |
Can-Am |
![]()
Post
#15
|
Newbie ![]() Group: Members Posts: 36 Joined: 20-November 07 From: Scottsdale, AZ Member No.: 8,360 Region Association: None ![]() ![]() |
2 please, with hardware.
|
75914-L20C |
![]()
Post
#16
|
It isn't what you drive, but how you drive that counts. ![]() ![]() Group: Members Posts: 57 Joined: 29-November 05 From: MN, USA Member No.: 5,204 Region Association: Upper MidWest ![]() |
I'll buy one. Thanks for the effort on this!
|
Highland |
![]()
Post
#17
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 548 Joined: 8-August 11 From: San Diego, CA Member No.: 13,418 Region Association: Southern California ![]() |
Please add me with hardware. Thanks.
|
jrrobertson |
![]()
Post
#18
|
Member ![]() ![]() Group: Members Posts: 51 Joined: 28-December 16 From: Wolverine Lake , Michigan Member No.: 20,704 Region Association: Upper MidWest ![]() ![]() |
I would like one and a hardware kit.
|
Mitox |
![]()
Post
#19
|
Member ![]() ![]() Group: Members Posts: 416 Joined: 26-October 15 From: SW Virginia Member No.: 19,302 Region Association: South East States ![]() ![]() |
I’ll take one with the hardware.
Thanks |
rktmn247 |
![]()
Post
#20
|
Irish Green with GT envy! ![]() ![]() Group: Members Posts: 348 Joined: 18-August 05 From: Mililani, HI Member No.: 4,612 Region Association: None ![]() ![]() |
I'll take one + hardware. Thanks!
|
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 30th June 2025 - 07:39 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |