Help - Seat Installation |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Help - Seat Installation |
Tom1394racing |
Feb 16 2024, 03:16 PM
Post
#1
|
Member Group: Members Posts: 285 Joined: 25-August 07 From: CT Member No.: 8,039 Region Association: North East States |
I am ready to test fit my new GTS Classic seats in my GT project. I have done this several times in a 911 but never in a 914 before. The 914 seat removal process was pretty straightforward. Simply slide the seat forward and release the pin spring to slide the seat all the way out.
I tried doing the same thing for installation but getting the seat rails lined up with the rails on the seat slider/tilt assembly seemed to be near impossible. I did make sure the seat/seat slider assembly went together and that the seat slid smoothly in the rails before trying the installation but working alone there was no way I would be able to line up the seat rails. I am guessing that the best way to do this is to install the seat slider/tilt assembly on the seat rails slid part way so that the holes for installing the slider/tilt assembly are still accessible and then installing both in the car. How should this work? |
Lo-Fi Version | Time is now: 19th May 2024 - 10:56 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |