 Brake Bleeding Woes, How to bleed brakes with 240 calipers |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Huff |
 Feb 14 2006, 11:12 AM
Post
#1
|
|
Newbie  Group: Members Posts: 20 Joined: 30-March 05 From: Savannah, GA Member No.: 3,849  |
Any help out there? I am converting my 75 2.0l to Volvo girling calipers and can't get it bled properly. I have installed a new 19mm MC, all new rotors, new rear calipers, T for the proportioning valve, new Volvo 240 calipers with T's to put the two to one line conversion, SS flex brake lines and all necessary plumbing.
I have bled and bled and bled, etc... Started RR, LR, RF, LF in that order and have tried bleeding the two Volvo upper fittings in pairs and separately. The pedal is stiff after pumping brakes repeatedly with only 2"-3" of travel. When you let off and push slowly, the pedal goes 4"-6" and is mushy. Any help? |
   |
 
|
Posts in this topic
Huff Brake Bleeding Woes Feb 14 2006, 11:12 AM
Aaron Cox what did you do about the dual inlets on the volvo... Feb 14 2006, 11:15 AM john rogers I'd suggest getting one of the power bleeders ... Feb 14 2006, 11:18 AM davep It almost sounds like the master has an internal l... Feb 14 2006, 11:26 AM jsteele22 I'd second the advice on the power bleeder. T... Feb 14 2006, 11:31 AM Huff I used a T for the dual inlet girling calipers and... Feb 14 2006, 11:58 AM ArtechnikA Feb 14 2006, 12:08 PM r_towle Does the caliper have two bleeders? top and bottom... Feb 14 2006, 01:59 PM Huff It has two bleeders on the top (one on each side) ... Feb 14 2006, 02:08 PM KaptKaos Are you losing fluid? Feb 14 2006, 02:12 PM r_towle Feb 14 2006, 02:21 PM r_towle think of it this way....for each caliper, there ar... Feb 14 2006, 02:23 PM Twystd1 By the way???
Are you starting with the rears fir... Feb 14 2006, 03:55 PM 9146986 You take a resevoir cap and install a tire valve, ... Feb 15 2006, 08:27 AM Huff Thanks guys, I will try the pressure bleeding appr... Feb 15 2006, 08:34 AM
rhodyguy and get some speed bleeders, 4 of them, thread siz... Feb 15 2006, 08:34 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th May 2024 - 11:36 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.