 Tranny Shims (gaskets), Thickness |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 2-OH! |
 Feb 26 2004, 09:10 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 552 Joined: 17-October 03 From: Santa Clarita, Kalifornication Member No.: 1,253  |
1975 2.0 901 standard tranny...Three shims currently installed
I measure the three shims (gaskets) between the intermediate case and the tranny case...Measured individually and together, the total thickness as measured by a michrometer is .012...Converted to mm's that comes out to be .30 mm's... The gaskets come in three thicknesses, 1.mm, 1.5mm, and 2.0mm's... I can't get there from here...Where am I going wrong with my math... In the first place, these gaskets are paper thin, noway they are 1, 1.5 or 2 mm's thick... so I am thinking it's a sneaky european trick with the decimal points... Any help out there... 2-OH! |
   |
 
|
Posts in this topic
2-OH! Tranny Shims (gaskets) Feb 26 2004, 09:10 AM
Demick Yep. Missed a decimal place.
If I remember corr... Feb 26 2004, 09:24 AM Bleyseng Try to figure out what color the shims were, pink,... Feb 26 2004, 09:37 AM 2-OH! I don't think color will work, I got a 1.mm, 1... Feb 26 2004, 10:52 AM Brad Roberts They CRUSH when you crank it down. Go by the color... Feb 26 2004, 04:41 PM 2-OH! Thanks guys,
I just ordered three "tan" because I... Feb 26 2004, 05:48 PM Brad Roberts Im betting somebody has been in that tranny before... Feb 26 2004, 07:09 PM brant what is the measurement supposed to be for the sli... Feb 26 2004, 07:11 PM Brad Roberts It is in the Haynes book.. but I dont go by it. I ... Feb 26 2004, 07:14 PM TimT Did you pull the diff out?
well actually doesnt ... Feb 26 2004, 07:58 PM Brad Roberts OH.. something that has NOT been brought up in pub... Feb 26 2004, 08:04 PM
2-OH! [QUOTE]I set the slider to engage first cleanly.. ... Feb 26 2004, 09:42 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 20th May 2024 - 11:11 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.