I often go to swaps looking for something only to have people say "I have 4 of those at home, but I didn't bring any". I figure we can list things we need and have for sale here, to make sure we bring what people need, and people bring what we need. Since there's talk of a sawzall party, we can make a wish list of neded body parts too. So here's my info:

I need:
Passenger side door (late style)
Passenger side outer door handle (not perfect, but functional and cheap)
Seats (maybe)
All rubber seals
5 lug rear hubs
Clutch cable
228mm flywheel and clutch

I have for sale:
1973 1.7 with salvage title (I won't be bringing this unless somebody wants to buy it)
tan interior
bus 2.0 engine, complete and disassembled with pretty fresh heads
1.8 engine in unknown condition
pretty much every transmission part from a 914 or early 912 (4 speed)
SS 1.7 heat exchangers
2.0 heat exchangers
monza (I think) exhaust
rear trunk lid
entire front suspension/steering (4 lug)
used rear axles
several flywheels


Body parts I need from sawzall victim:

Drivers side outer sail panel, down to the door handle cutout

Is anyone bringing a spot weld drill bit? (I don't have one) I have alot of smaller misc things, and I'll check this thread before I leave to make sure I bring specially requested items.

Passenger side door (late style).............yes
Passenger side outer door handle (not perfect, but functional and cheap).......think so
Seats (maybe)...........yep
All rubber seals..........
5 lug rear hubs.......... not me
Clutch cable............... have to look
228mm flywheel and clutch..........huh?

I have for sale:
1973 1.7 with salvage title (I won't be bringing this unless somebody wants to buy it)
tan interior............Is this the 15K car?


Body parts I need from sawzall victim:

Drivers side outer sail panel, down to the door handle cutout..........your choice of two, you bring the blades.

There, that narrows it a bit.

come down a day early and AX

ron the parts whore should have anything you need!

EDIT: damn,,, too slow

Sweet, blades I've got. Now I just hope I can sell some of this stuff so I can afford to buy some stuff.

15K car? As in miles or dollars? Either way, no

(The car has a black interior, the tan interior came out of my current project. They're separate.)

Aaron: I'll be coming down in a van full of parts.. It'd be like trying to AX in a fire truck

A NEW ASS, MINE HAS A CRACK!

i may need the rear decklid... what are you asking?

Aaron will fix you right up! He'll plug that crack so you won't even know it was there.

dammit...

slits knows how to plug it, his head is plugging up his ass crack . and is big enuff to plug yours too! <_<

$20. It's in good shape, but not perfect. It has a small amount of filler (evercote) on it, to fill a shallow (but fairly large) dent. Top is primered, bottom is delphi metallic green with some scratches.

same with mine... fatty dent, hammered close..and bondo'd over .. thanks anyway man

This one hasn't been hammered.. it's just a wide shallow dent, left unfixed it would just barely show up. I'll bring it and you can look at the underside and decide. (it's already in the van)

Ron: Do you still need a ride for the car?
Joe

Need:

Passenger side front fender (complete) and since Bondo is a good friend of mine he'll let me use his tools to cut one off of a car if there is one to tear it off of

Drivers side rear fender (the whole damn thing)


-Tony

Needed, right side and front right side engine tin for a 1.7.
Joe

i have a good set of front fenders

Anyone have a good front bumper pad? I'd hate to bend over and grab my ankles for the folks at Auto Atlanta or Pelican on my first "significant" purchase for my "new" 914. Those suckers are expensive, almost 3 bills!!! YIKES!!!

Joe, come by the house sometime, I may have that sheet metal and I really dont need any type 4 stuff.

I've got a box of misc engine tin, I'll bring it. Not sure what is what, but if you know how to identify it, you'll probably find it

Good idea Bondo,

What I got:
-4 fiberglass flares
-rebuilt 73 D-jet computer
-1.7/1.8 heat exchangers
-Monza exhaust
-3.1L Corvair engine for a 914 (ask)
-Hard top dash cover ( may ebay first, depends on offers)
-Miscellaneous parts (ask)
911, 914-6 stuff
-'74 heat exchangers
-2 oil coolers in great shape
-911 tin

I have much more, but it has been a week since I have been in my rats nest.

What I want:
-916 rear end!!! Please
-more to come

I have a bomb ass rubber front end (actual shape is good, but it is painted). Make an offer.

Scott: Thanks , I'll do that. Thanks.
With all the stuff everybody has to bring , this should be a great swap meet.
Bondo: What color of door are you looking for.
Joe

Mike: Rubber front end? as in air dam?

Joe: Doesn't matter, but it looks like I've got the door taken care of now.

Royce,
nope, as in rubber bumper insert fot early model.
HTH

Reasonably clean headlight buckets that I can get the #$@%^!!! screws out of w/o dremmeling the screw slots

I need the interior roll bar pad that covers the rear targa latches. Most anything will do, but would prefer one with minimal cracking of course. Also looking for a decent set of fog light grills, front bumperettes, a wiring harness for the center console gauges and rocker panels that are fairly straight.

I have some good weatherstripping, a 2L f.i. system, a 2L monza muffler, sand blasted but uncracked windshield and much more crap; er parts that I don't take to Pomona anymore.

Don't forget to move your clocks back an hour the night before or that morning!

I want brown cloth/velor/leather/something besides vinyl seat inserts.

And brown door panels that do not have the speaker hoes cut in them.

I saw this on your last post also. I have a 2004 calendar that has the change happening on the 31st.

My calendar has the 24th and 31st on the same square (I hate when they do that) and has a notation for daylight savings time and a notation for halloween in the box. I guess that makes my calendar useless for resolving the issue

It is on the 31st. I have a better calendar.


Andrew

Damn, one less hour of sleep.

Nah, because Glenn is obviously going to show up one hour late.


Andrew

Haha!

If anyone wants more details, here's a link:

Los Angeles time stuff

Duffster - Reasonably clean headlight buckets that I can get the #$@%^!!! screws out of w/o dremmeling the screw slots - Yes, plenty

Ron: Do you still need a ride for the car? - Don't know yet, but we can cut it where it is.
Joe


Tony - Passenger side front fender Drivers side rear fender (the whole damn thing)
YES and YES

(good way to bump the thread)

I bet I've got what you need.

Needed:

1 sevicable flywheel
1 -2 cam gear

Headrage: You forgot to mention boots for your injectors.
Joe

Oh yeah.

2 ea. Injector boots

Flywheel = yes

1-2 cam gear = 10 to look at

Injector boots =

I need a chrome Fuchs center cap to match my other 3.

I think I can use some seats. PO replaced original with some Corvette seats... but I don't like the way they look/fit in the car.

Are you bringing your car to the swap? What exactly do you not like about the vette seats? I'm looking at seat options and from pics of yours I thought I might like the corvette seats. I've decided not to use a backpad, so backpad fit is unimportant.

John, You coming out?? If you are, are you going to bring your new car?? I would like to see it.

I'm 99% sure I will be there. I plan on driving Elvira unless somebody makes me an offer for the race car and wants me to deliver it.

and youre gonna show a day early for the AX right????

I would love to be able to come down for the full weekend. It is nearly impossible for me to get out of work on a Saturday. (I work in a casino) I am planning on getting next weekend so I can go racing with VARA. There is no way I can call in sick 2 Saturdays in a row.

come on john, AX with fellow teeners? or go race Vara... seems like an easy one for me

I already beat everybody (except Bill Pickering - nine14cats) in my class at the WCC.
I am going to race with VARA where I hope to find some competition.

ouch

Here I am with my hands full in the last VARA race.
http://gordon.smugmug.com/gallery/90443/12...2/3169507/Large

Can somebody show me how to get around the blocks on this web site and post the picture directly?

This one is for you John -