Mikey914
Apr 3 2017, 04:18 PM
updated:Since I just listed the boots that were prewired Figured I should get these up too.
We are looking to blow these out! Set of turn signal lenses available in amber ($9.99), or clear ($13.99).
Buy the gaskets for them and use code
GBLENS2017 for free USPS first class shipping.
http://shop.914rubber.com/Turn-Signal-Lens...-Buy-FTSLGB.htm
mb911
Apr 3 2017, 04:54 PM
Will you be doing Euro turn signal lenses?
jd74914
Apr 3 2017, 05:07 PM
I'm up for a set.
drem914
Apr 3 2017, 05:09 PM
QUOTE(mb911 @ Apr 3 2017, 03:54 PM)
Will you be doing Euro turn signal lenses?
Or how about the Italian clear version?
burton73
Apr 3 2017, 05:55 PM
" GB new fog light lenses - New hard tooling, $9.99 a set!!!!!!!! April Special"
Sorry if I did not get this right. Is the sale for turn signal lenses shown or for fog lenses?
Thanks for your support for 914s. I installed the door top small rubber parts and it did the trick. Great job fast delivery
Bob B
jet1
Apr 3 2017, 05:56 PM
in for a set
Mikey914
Apr 3 2017, 06:58 PM
QUOTE(mb911 @ Apr 3 2017, 03:54 PM)
Will you be doing Euro turn signal lenses?
Unfortunately, the Euro version is a little more difficult, and will require some additional tooling, not saying no, just not right now.
Mikey914
Apr 3 2017, 06:59 PM
QUOTE(drem914 @ Apr 3 2017, 04:09 PM)
QUOTE(mb911 @ Apr 3 2017, 03:54 PM)
Will you be doing Euro turn signal lenses?
Or how about the Italian clear version?
Getting the material in to do the clear. The will actually be a couple dollars more ($4 for the GB), but still a screaming deal.
Mikey914
Apr 3 2017, 07:02 PM
QUOTE(burton73 @ Apr 3 2017, 04:55 PM)
" GB new fog light lenses - New hard tooling, $9.99 a set!!!!!!!! April Special"
Sorry if I did not get this right. Is the sale for turn signal lenses shown or for fog lenses?
Thanks for your support for 914s. I installed the door top small rubber parts and it did the trick. Great job fast delivery
Bob B
My mistake. I have corrected - Front turn signal lenses. I was working on more fog light grills and the brain didn't shift gears.
mepstein
Apr 3 2017, 07:16 PM
QUOTE(Mikey914 @ Apr 3 2017, 08:58 PM)
QUOTE(mb911 @ Apr 3 2017, 03:54 PM)
Will you be doing Euro turn signal lenses?
Unfortunately, the Euro version is a little more difficult, and will require some additional tooling, not saying no, just not right now.
They are $70 on amazon. Not terrible but I want 4 sets so I'll wait on you.
SKL1
Apr 3 2017, 08:07 PM
I've got the Italian clear lenses on my silver '71 and they look great. I'd love an extra set.
Hope you make the euro lenses too as one of mine on the '73 is cracked... if you do any GB's, I'm in!
I've got several sets of OEM US lenses collecting dust!
RJMII
Apr 4 2017, 12:43 AM
2 Italian sets for me, please.
Tbrown4x4
Apr 4 2017, 02:50 AM
2 sets for me. ( 4 lenses, 4 gaskets)
falcor75
Apr 4 2017, 05:00 AM
I will sign up for one set of Italians. Might spring for that custom carpet piece we've discussed to fit a Rennshift at the same time when you have these done.
jacksun
Apr 4 2017, 05:01 AM
Hi, I would like one set of lens and seals
tks
dlee6204
Apr 4 2017, 05:14 AM
Interested in 2 sets
sb914
Apr 4 2017, 05:56 AM
I'll take a set, and a clear set with seals
jmitro
Apr 4 2017, 06:23 AM
I'm in for a set of orange and seals.
I'll be making a huge order for your entire late rubber package and carpet kit pretty soon
rfinegan
Apr 4 2017, 06:32 AM
I have not seen the smoked lenses available for some time, any plans on making these?
I would be in for a set and gaskets
-Robert
Chris H.
Apr 4 2017, 07:20 AM
Hit me with some orange ones (1 set). I already have the seals just didn't want to use them on the lenses I have.
Beach914
Apr 4 2017, 08:09 AM
I would like two sets please.
76-914
Apr 4 2017, 08:43 AM
I don't need any but I can't help but remember looking and paying more for used lenses a few years back. Thanks to Mark and a few other peeps here I don't need to search ads and trash cans for parts any longer. Thx for all you do Mark!
markhoward
Apr 4 2017, 08:52 AM
I'm in for a set. Thanks Mark!!
Mikey914
Apr 4 2017, 09:00 AM
QUOTE(rfinegan @ Apr 4 2017, 05:32 AM)
I have not seen the smoked lenses available for some time, any plans on making these?
I would be in for a set and gaskets
-Robert
WE are not making the Smoked currently, however the clear can be smoked if you want to put film on them.
Mark
toolguy
Apr 4 2017, 09:00 AM
2 sets with gaskets please
What is the time frame for the Euro version ??
And a BIG THANK YOU for all your efforts to our community
.
SteveL
Apr 4 2017, 09:05 AM
I want a set please - how much for lenses and seals?
Thanks!
Mikey914
Apr 4 2017, 09:11 AM
The seals are $16.50 for the set, but buy both together you get free shipping on the set.
pgollender
Apr 4 2017, 09:13 AM
Mike, when you tool up for the Euro-version, I'm in for two sets.
Mikey914
Apr 4 2017, 09:26 AM
Just to let you know the GB on the Euros will be significantly more than these. Single injection tooling is much less. There is a reason that no one else has made them yet.
MArk
mobymutt
Apr 4 2017, 09:31 AM
QUOTE(Mikey914 @ Apr 4 2017, 11:26 AM)
Just to let you know the GB on the Euros will be significantly more than these. Single injection tooling is much less. There is a reason that no one else has made them yet.
MArk
Would it be possible to make those as two pieces, and bond them together, rather than using double injection?
pgollender
Apr 4 2017, 09:33 AM
QUOTE(Mikey914 @ Apr 4 2017, 08:26 AM)
Just to let you know the GB on the Euros will be significantly more than these. Single injection tooling is much less. There is a reason that no one else has made them yet.
MArk
Copy that. Some little things are worth the price difference.
Mikey914
Apr 4 2017, 09:43 AM
QUOTE(mobymutt @ Apr 4 2017, 08:31 AM)
QUOTE(Mikey914 @ Apr 4 2017, 11:26 AM)
Just to let you know the GB on the Euros will be significantly more than these. Single injection tooling is much less. There is a reason that no one else has made them yet.
MArk
Would it be possible to make those as two pieces, and bond them together, rather than using double injection?
Possible, yes cost effective for production probably not. But I can sell you a set of both very inexpensively.
We will have a vote on nicest ones winner gets them for free!!!
Anyone interested in a contest?
ConeDodger
Apr 4 2017, 09:56 AM
I'll take one of the the Targa Bar Pads
Seriously, what are you thinking! You're giving away the store!
mobymutt
Apr 4 2017, 11:35 AM
QUOTE(Mikey914 @ Apr 4 2017, 11:43 AM)
QUOTE(mobymutt @ Apr 4 2017, 08:31 AM)
QUOTE(Mikey914 @ Apr 4 2017, 11:26 AM)
Just to let you know the GB on the Euros will be significantly more than these. Single injection tooling is much less. There is a reason that no one else has made them yet.
MArk
Would it be possible to make those as two pieces, and bond them together, rather than using double injection?
Possible, yes cost effective for production probably not. But I can sell you a set of both very inexpensively.
We will have a vote on nicest ones winner gets them for free!!!
Anyone interested in a contest?Can't figure out if you're making fun of me or not! Still, for that price, I might just go ahead. Although now I'd need to get three sets, so I'd still have a good set after I botch it all up.
yeahmag
Apr 4 2017, 07:43 PM
I'm in for a set.
mepstein
Apr 4 2017, 07:54 PM
QUOTE(Mikey914 @ Apr 4 2017, 11:26 AM)
Just to let you know the GB on the Euros will be significantly more than these. Single injection tooling is much less. There is a reason that no one else has made them yet.
MArk
I'm good up to $75. Hopefully it can be less.
wndsrfr
Apr 4 2017, 08:01 PM
I'm in for a set of the clear lenses....
John
green914
Apr 4 2017, 08:12 PM
I will take a set.
Larry.Hubby
Apr 4 2017, 08:42 PM
I'll take a set of the orange with seals.
aggiezig
Apr 4 2017, 09:00 PM
Would be in for one clear and one amber set + 2 x seals
Nie Zu Alt
Apr 4 2017, 09:09 PM
2 clear lens sets for me with gaskets. ( 4 lenses, 4 gaskets)
Thanks!
Doug H.
Mark Henry
Apr 4 2017, 09:25 PM
When does this close?
What else is on special price?
Mikey914
Apr 4 2017, 10:35 PM
QUOTE(mobymutt @ Apr 4 2017, 10:35 AM)
QUOTE(Mikey914 @ Apr 4 2017, 11:43 AM)
QUOTE(mobymutt @ Apr 4 2017, 08:31 AM)
QUOTE(Mikey914 @ Apr 4 2017, 11:26 AM)
Just to let you know the GB on the Euros will be significantly more than these. Single injection tooling is much less. There is a reason that no one else has made them yet.
MArk
Would it be possible to make those as two pieces, and bond them together, rather than using double injection?
Possible, yes cost effective for production probably not. But I can sell you a set of both very inexpensively.
We will have a vote on nicest ones winner gets them for free!!!
Anyone interested in a contest?Can't figure out if you're making fun of me or not! Still, for that price, I might just go ahead. Although now I'd need to get three sets, so I'd still have a good set after I botch it all up.
Not making fun of you, I'm dead serious. I just tried and it's not too hard to do this. I cut both clear and amber at the inner web, sanded the edge smooth to the rib with a belt sander, and glued together with 5min epoxy on a flat surface. Then went back and added more epoxy on the inside after the 1st edge gluing. Turned out pretty nice.
Do understand the clear are $13.99 a set as they do cost me more to make. Also you can imagine I'm doing this as a promotion so I am loosing money to get these out there. I will hold it open for 2 weeks after I get this up and start contacting all that step forward.
It will be with a code you will need to enter on the site, so you will need to bump the thread to get it. My job was a bit rushed, but the results are acceptable to me. I will be putting on my car.
Mikey914
Apr 5 2017, 01:41 AM
I'm thinking we should be able to do these at $46 a set. I really like the way they turned out.
mepstein
Apr 5 2017, 04:11 AM
QUOTE(Mikey914 @ Apr 5 2017, 03:41 AM)
I'm thinking we should be able to do these at $46 a set. I really like the way they turned out.
That would be great.
mb911
Apr 5 2017, 05:57 AM
QUOTE(mepstein @ Apr 5 2017, 02:11 AM)
QUOTE(Mikey914 @ Apr 5 2017, 03:41 AM)
I'm thinking we should be able to do these at $46 a set. I really like the way they turned out.
That would be great.
I would be in at that price for sure.
Peashooter
Apr 5 2017, 06:39 AM
I'd like a clear set with gaskets! Thanks!
EdwardBlume
Apr 5 2017, 06:39 AM
I'm in for a set of the orange. Will get back to you on the other set once I get home. thanks!
Shadowfax
Apr 5 2017, 06:54 AM
Please put me down for two sets - one orange set and one clear. Thanks, Mark!
mobymutt
Apr 5 2017, 07:20 AM
Mark, what's the timing on these? I'd like to add them to my current order (orange or clear or both), but only if they can be shipped in April.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.