mb911
Jan 7 2024, 10:14 AM
My laser cuts will be done in about a week or 2 and wanted to offer them up here before going to my website. They will be on the website for $65 plus shipping. I will be offering these to the group for $45 plus shipping. They will all be powder painted flat black and come with hardware. You will likely have to drill the mount for your exact FE. I use a purple K thanks to Greg Coons suggestion years ago. This will fit all 914s with movable passenger seats. Zero mods required for the car and the parts are laser cut with no welds so look very clean.
PayPal or check are accepted. I would expect that shipping will be in the $15-$17 dollar range for most locations. If PayPal I will ask for the 3% fees.
You can email or PM for details
Or post here
Click to view attachment
mzapisek
Jan 7 2024, 12:16 PM
I have two of these installed. Great quality and really easy to install.
orthobiz
Jan 7 2024, 12:39 PM
I am in for one please...
Paul
mb911
Jan 7 2024, 01:22 PM
QUOTE(orthobiz @ Jan 7 2024, 10:39 AM)
I am in for one please...
Paul
Sounds good
Freezin 914
Jan 7 2024, 01:25 PM
I would do one for sure. If they will work in a 911, I would buy another one as well.
Rufus
Jan 7 2024, 01:46 PM
Ben, I’m in for one as well. Thanks, PM sent
Cairo94507
Jan 7 2024, 01:51 PM
Yup; PM sent.
mb911
Jan 7 2024, 02:07 PM
QUOTE(Freezin 914 @ Jan 7 2024, 11:25 AM)
I would do one for sure. If they will work in a 911, I would buy another one as well.
Sorry not on a 911
mb911
Jan 7 2024, 02:09 PM
I won’t reply back to pms right away as I want to keep them new and unread until I have a bigger list made in a day or 2 then I will make sure you include all your contact information.
GEB63
Jan 7 2024, 05:53 PM
Ben, I will take one as well. Thanks
technicalninja
Jan 7 2024, 06:35 PM
Count me in as well.
I was a huge believer in Halon.
Boy, those are expensive now!
A decent sized one is 500+ today.
They will put out the SUN!
I'll have to look closer at the Purple K stuff now.
jdbogart@self-serv.net
Jan 7 2024, 08:02 PM
QUOTE(mb911 @ Jan 7 2024, 03:09 PM)
I won’t reply back to pms right away as I want to keep them new and unread until I have a bigger list made in a day or 2 then I will make sure you include all your contact information.
I really like it, but it appears from your website the mount won't work on the passenger seat of a 1970 914, correct?
Don
Bucci
Jan 8 2024, 12:26 AM
Ben, I’ll take one please post description for payments.
arbitrary
Jan 8 2024, 12:55 AM
One please.
mb911
Jan 8 2024, 05:06 AM
QUOTE(Bucci @ Jan 7 2024, 10:26 PM)
Ben, I’ll take one please post description for payments.
I don’t have a 70 to confirm with but I doubt it.
Superhawk996
Jan 8 2024, 09:54 AM
Ben,
Sorry to be dense. When you say no mod, how are they mounting? Sharing bolts with seat adjust comb? Just clipping over the lateral box section in front of the seat?
I think I’m in for one but just want to understand how it mounts
Steve
Jan 8 2024, 10:49 AM
I will take one
Montreal914
Jan 8 2024, 11:00 AM
QUOTE(Superhawk996 @ Jan 8 2024, 07:54 AM)
Ben,
Sorry to be dense. When you say no mod, how are they mounting? Sharing bolts with seat adjust comb? Just clipping over the lateral box section in front of the seat?
I think I’m in for one but just want to understand how it mounts
Same here…
Is it attached to the body or the seat (does it move or not)?
If attached to the body, what is the seat position in your picture, far back or set for a normal passenger height (what ever normal means…)?
Any option of getting it in satin black instead of flat black?
Thanks for making these!
Parallel topic, maybe group shipping to some of the SoCal folks? Just a thought…
mb911
Jan 8 2024, 11:34 AM
QUOTE(Montreal914 @ Jan 8 2024, 09:00 AM)
QUOTE(Superhawk996 @ Jan 8 2024, 07:54 AM)
Ben,
Sorry to be dense. When you say no mod, how are they mounting? Sharing bolts with seat adjust comb? Just clipping over the lateral box section in front of the seat?
I think I’m in for one but just want to understand how it mounts
Same here…
Is it attached to the body or the seat (does it move or not)?
If attached to the body, what is the seat position in your picture, far back or set for a normal passenger height (what ever normal means…)?
Any option of getting it in satin black instead of flat black?
Thanks for making these!
Parallel topic, maybe group shipping to some of the SoCal folks? Just a thought…
Sorry flat black is it. No other options without making it expensive. These mount on the seat itself and sandwich mount-seat base material- large washer and then bolts through the whole assembly
Click to view attachment
mb911
Jan 8 2024, 11:36 AM
I tested in my car for the last few years. It works perfect and doesn’t get in the way of my 8 year old or my 23 year old when they get in the car
mb911
Jan 8 2024, 03:43 PM
Please PM with interest as well.
mb911
Jan 8 2024, 04:46 PM
One member commented that possibly the fire extinguisher is to far away from the seat and the reason for this was to ensure it would fit multiple FEs if for some reason you want those trimmed before powder back by an inch or so please let me know by tomorrow afternoon. All get bent Wednesday morning
Eric_Ciampa
Jan 8 2024, 06:20 PM
Put me down for one.
mb911
Jan 8 2024, 06:59 PM
QUOTE(Eric_Ciampa @ Jan 8 2024, 04:20 PM)
Put me down for one.
Ok
Superhawk996
Jan 8 2024, 10:50 PM
I’m in
mb911
Jan 9 2024, 06:15 AM
Sounds good everyone picking up laser cuts this morning
dstudeba
Jan 9 2024, 10:23 AM
Please add me, thanks!
mb911
Jan 9 2024, 11:38 AM
Laser cuts have been picked up. Bending tomorrow then off to painter
Click to view attachment
mb911
Jan 9 2024, 05:02 PM
Expecting to be shipping by next Tuesday/Wednesday
jmalone
Jan 9 2024, 06:22 PM
Ben, please put me on the list for one bracket. Thanks so much for making these.
mb911
Jan 9 2024, 06:28 PM
QUOTE(jmalone @ Jan 9 2024, 04:22 PM)
Ben, please put me on the list for one bracket. Thanks so much for making these.
If you could drop a PM with all your details like email and shipping information and I can send PayPal invoices?
That goes for everyone. Ordered boxes this will move fast
mb911
Jan 10 2024, 10:29 AM
Click to view attachment All bent and headed to powder paint
DRPHIL914
Jan 10 2024, 04:57 PM
interested as well, i just was out of town and not online much at all for the past week so i missed this when it was launched.
Please put me down for one i will PM you
Phil
JamesM
Jan 11 2024, 01:58 AM
Just saw this.
count me in!
perfect timing too as my car is just going back together and I have been looking for a better way to mount my extinguisher.
JamesM
Jan 11 2024, 02:00 AM
QUOTE(JamesM @ Jan 11 2024, 12:58 AM)
Just saw this.
count me in!
perfect timing too as my car is just going back together and I have been looking for a better way to mount my extinguisher.
actually strike that i guess. Just notices you are mounting to the seat itself and I wont be running stock seats. Im looking for something that possibly attaches to the stock rails but I wont have the stock seats.
mb911
Jan 11 2024, 10:28 AM
QUOTE(JamesM @ Jan 11 2024, 12:00 AM)
QUOTE(JamesM @ Jan 11 2024, 12:58 AM)
Just saw this.
count me in!
perfect timing too as my car is just going back together and I have been looking for a better way to mount my extinguisher.
actually strike that i guess. Just notices you are mounting to the seat itself and I wont be running stock seats. Im looking for something that possibly attaches to the stock rails but I wont have the stock seats.
There really was not an easy way to do that without modifying the seat rails and that doesn’t work for the masses
SirAndy
Jan 11 2024, 10:55 AM
I'll take one!
Gary
Jan 11 2024, 03:06 PM
Want 1. Will PM.
mb911
Jan 11 2024, 04:59 PM
Done. Gonna box tomorrow then we pm everyone or send PayPal invoices for those that sent me information
Click to view attachment
mb911
Jan 11 2024, 08:22 PM
56kabrio
Jan 11 2024, 09:05 PM
I’ll take one as well.
Thanks
Mack
mb911
Jan 11 2024, 09:20 PM
QUOTE(56kabrio @ Jan 11 2024, 07:05 PM)
I’ll take one as well.
Thanks
Mack
Please send a pm with contact information. I will be sending invoices tomorrow
mb911
Jan 12 2024, 07:57 AM
Freezin 914
Jan 12 2024, 11:36 AM
Cairo94507
Jan 12 2024, 11:45 AM
Money sent.
mb911
Jan 12 2024, 12:15 PM
Everyone that sent and email address except DRPHIL (your email is to long) has been sent an invoice. Everyone else got a PM with details on how to pay. Thanks for the support it allowed me to sell half of what I had made and that really allows me to continue to inventory products and make new products
Superhawk996
Jan 12 2024, 01:26 PM
Thanks for making these Ben!
I always struggle with make vs buy. It’s always hard to beat the stuff you do.
By the time I get metal, cut, drill, de-burr, powder coat, and account for my time, etc., I think this was a great deal.
mb911
Jan 12 2024, 02:15 PM
QUOTE(Superhawk996 @ Jan 12 2024, 11:26 AM)
Thanks for making these Ben!
I always struggle with make vs buy. It’s always hard to beat the stuff you do.
By the time I get metal, cut, drill, de-burr, powder coat, and account for my time, etc., I think this was a great deal.
That’s kind of how I view it as well. I was also able to supply everyone with a new stick perfect for your back window in the 914 or on your tool box. Shipping ended up being more than I hoped but still worked out ok. I charged 17 to everyone and averaged 23 but I am ok with it helping everyone out and still a few bucks left for me to buy 914 stuff
JuniorVarsity
Jan 14 2024, 06:31 PM
poop, just seeing this. Will take one if any left or another run is planned. Will PM my data just in case.
mb911
Jan 14 2024, 07:12 PM
QUOTE(JuniorVarsity @ Jan 14 2024, 04:31 PM)
poop, just seeing this. Will take one if any left or another run is planned. Will PM my data just in case.
I have plenty left. And replied to your PM.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.