Help - Search - Members - Calendar
Full Version: fyi
914World.com > The 914 Forums > 914World Garage
Pages: 1, 2
dr914@autoatlanta.com
QUOTE
QUOTE
QUOTE
QUOTE
QUOTE
Hi George, do you have a new 914-613-913-14 turn signal assembly? If yes, cost? Looks like VW is stamped on it so perhaps it's available through them?

Its for a 72 914

Thanks,

Paul


Hi Paul. Yes we have them but expensively as we were taken to the cleaners for the last 50 of them ever to be made by swf. We have a cheap alternative for 49.50 that will work fine though.

Thanks George, I called to talk to you but you were busy. I ordered an OEM style from your gal.

Paul


I do not know what she took an order for but we do not have the oem switch for sale right now. I purchased the last twenty of them for over 165.00 each to have them but will not offer them to the public as the price is just way too much. We find the aftermarket to fit just fine and for 49.50 cannot be beat! The difference is the single copper feeler for the rubbing block for the horn.



OK George, your gal (Kerri) quoted me the price for OEM (since you did not) and I placed the order. I asked 3 times if it was the OEM switch. The order was complete. Now you say it's not. I called back to resolve it but the order is now cancelled. This kind of stuff is why you have a bad reputation in the 914 arena. I thought by e-mailing you direct that these things would be minimized. Apparently not. sigh..... mad.gif


We try hard to give people good advice and guidance here whether they want it or not and therefore more than we like get upset. Like you now. I am not one to try to placate the masses by doing the wrong thing and selling a part that is way overpriced and not worth it when there is a perfect substitution that I myself would use on my car. Obviously you (hopefully) mistook our intent and now can join those others in expressing displeasure. (Same as the guy who called the other day and wanted to buy a set of dual carbs for his 914 when I knew that the only problem was a bad pressure sensor. I refused to sell them to him. I will NOT compromise my integrity for the sake of making a sale. Sorry.
mills914/s
QUOTE(dr914@autoatlanta.com @ Jun 15 2007, 02:01 PM) *

QUOTE
QUOTE
QUOTE
QUOTE
QUOTE
Hi George, do you have a new 914-613-913-14 turn signal assembly? If yes, cost? Looks like VW is stamped on it so perhaps it's available through them?

Its for a 72 914

Thanks,

Paul


Hi Paul. Yes we have them but expensively as we were taken to the cleaners for the last 50 of them ever to be made by swf. We have a cheap alternative for 49.50 that will work fine though.

Thanks George, I called to talk to you but you were busy. I ordered an OEM style from your gal.

Paul


I do not know what she took an order for but we do not have the oem switch for sale right now. I purchased the last twenty of them for over 165.00 each to have them but will not offer them to the public as the price is just way too much. We find the aftermarket to fit just fine and for 49.50 cannot be beat! The difference is the single copper feeler for the rubbing block for the horn.



OK George, your gal (Kerri) quoted me the price for OEM (since you did not) and I placed the order. I asked 3 times if it was the OEM switch. The order was complete. Now you say it's not. I called back to resolve it but the order is now cancelled. This kind of stuff is why you have a bad reputation in the 914 arena. I thought by e-mailing you direct that these things would be minimized. Apparently not. sigh..... mad.gif


We try hard to give people good advice and guidance here whether they want it or not and therefore more than we like get upset. Like you now. I am not one to try to placate the masses by doing the wrong thing and selling a part that is way overpriced and not worth it when there is a perfect substitution that I myself would use on my car. Obviously you (hopefully) mistook our intent and now can join those others in expressing displeasure. (Same as the guy who called the other day and wanted to buy a set of dual carbs for his 914 when I knew that the only problem was a bad pressure sensor. I refused to sell them to him. I will NOT compromise my integrity for the sake of making a sale. Sorry.

George..
Don't take it to bad. There is still some of us that notice your efforts and like your stuff.Im happy with how helpfull your people are and with you.You always have good advise for us and great service from your parts dept.
Thank you!!!!
Tobra
Maybe he was an obsessive compulsive concourse weenie who was having a bad day. As bad a things I have read about your customer service, I must say I have always been done right.

Your book still pretty much kicks ass, so you got that going for you...

PRS914-6
OK George you want to smoke screen this than lets go.......

My first e-mail that can be read is the part # and a request for a price. You never state the price of the OEM only the aftermarket one. I wanted OEM since the wire colors are different on the "aftermarket" one.

Since you never stated the price I called this morning to ask what the price actually was on the OEM part. You were not available to answer and your staff asked what I wanted. I stated an OEM turn signal switch # 914 613 913 14.

Your staff quoted me under $100.00 to ship the part to me and said they were in stock. I ASKED 3 TIMES IF THIS WAS AN OEM SWITCH After 3 yes's, I said I'll pay the extra and take the OEM. She takes the order, my credit card # and gives me a order confirmation #189135 I assume it's a done deal.

Later, after I PM a "thanks" you say "I do not know what she took an order for but we do not have the oem switch for sale right now. I purchased the last twenty of them for over 165.00 each to have them but will not offer them to the public as the price is just way too much"

So you do have it and you quoted the wrong price. The fact that YOU would use the aftermarket piece does not mean that I want to use it. It's MY choice

Bottom line.....

1. Your staff quoted the price
2. Your staff confirmed the sale
3. You realized there was a mistake
4. You backed out of the deal to save your "integrity"?

Hey no problem on my end. Deal cancelled but your integrity was not the reason you cancelled. Money was.

jonferns
popcorn[1].gif
dr914@autoatlanta.com
QUOTE(PRS914-6 @ Jun 15 2007, 03:43 PM) *

OK George you want to smoke screen this than lets go.......

My first e-mail that can be read is the part # and a request for a price. You never state the price of the OEM only the aftermarket one. I wanted OEM since the wire colors are different on the "aftermarket" one.

Since you never stated the price I called this morning to ask what the price actually was on the OEM part. You were not available to answer and your staff asked what I wanted. I stated an OEM turn signal switch # 914 613 913 14.

Your staff quoted me under $100.00 to ship the part to me and said they were in stock. I ASKED 3 TIMES IF THIS WAS AN OEM SWITCH After 3 yes's, I said I'll pay the extra and take the OEM. She takes the order, my credit card # and gives me a order confirmation #189135 I assume it's a done deal.

Later, after I PM a "thanks" you say "I do not know what she took an order for but we do not have the oem switch for sale right now. I purchased the last twenty of them for over 165.00 each to have them but will not offer them to the public as the price is just way too much"

So you do have it and you quoted the wrong price. The fact that YOU would use the aftermarket piece does not mean that I want to use it. It's MY choice

Bottom line.....

1. Your staff quoted the price
2. Your staff confirmed the sale
3. You realized there was a mistake
4. You backed out of the deal to save your "integrity"?

Hey no problem on my end. Deal cancelled but your integrity was not the reason you cancelled. Money was.



Wrong on that one! I had no idea that you saw the ninety something file price when you ordered! We have to, via legal agreement with Porsche, use their price tape. 190,000 parts prices and thousands with wrong prices because of obsolescence! One says that the 911 2.7 piston and cylinder kit is .03 cents and we have had orders for it demanding the price.
One pays what ever it takes to get obsolete parts, as the unavailable is the unavailable and if you are the nutcase 914 enthusiast I am you do not care about the price for unobtainium, so that eliminates that argument. However when there is a dr. 914 recommended substitute at a reasonable price, who could turn it down.
Please remember that I am the biggest 914 nut case! I would like to meet a worse one! Please call me personally if you think you are!
Bottom line the 45 buck swich is good enough for me and the originals I have here on the shelf I will keep to look at twenty years from now when I am crawling to the pisspot.
Anyone have a new 914 dash available? I will buy it!
Root_Werks
As our little cars continue to return to the earth, people (including Porsche) understand the slowing demand for parts for the remaining soon to be piles of rust/dirt. Miss-communications suck, been there, done that. I have no valuable opinion on anything here, where's my beer? WTF.gif

There it is. boldblue.gif

Fun read though. aktion035.gif
PRS914-6
Sure, I have a new dash in the box. I'll sell it to you but after you order it, I'll "save" you and cancel since there is dash covers available that are so much cheaper and they are a perfect substitution and my integrity will still be intact....... av-943.gif
Ferg
av-943.gif
PeeGreen 914
popcorn[1].gif play nice guys.... clap56.gif
dr914@autoatlanta.com
QUOTE(PRS914-6 @ Jun 15 2007, 04:18 PM) *

Sure, I have a new dash in the box. I'll sell it to you but after you order it, I'll "save" you and cancel since there is dash covers available that are so much cheaper and they are a perfect substitution and my integrity will still be intact....... av-943.gif


Please how much for this nice piece...your price not the file price
jonferns
av-943.gif
SLITS
yellowsleep[1].gif
Marlow
Dr,

Are you sitting on the last 20 so you can sell them for $300 in 10 years???

If someone is willing to pay your $165 + profit for the OEM switch why not sell it to them?

I don't get it, your reasoning that "they're too expensive to sell to the public" doesn't make any sense to me.
PRS914-6
George, this subject drifted OT and I didn't help that much but let's put things in the proper perspective and stick to the issue.

You are in the parts business. You clearly have a lot of knowledge on 914's and I think everyone would agree.

The issue is business practises. Lets skip all the other BS about price lists etc.. On this issue the part retails for $75.26 quoted right from Porsche. However, it really doesn't matter.

Your company quoted me a specific price for this NLA part. I accepted the price and you took the order. 25% more for a NLA was fair I thought. Where the deal goes bad is hours later, you change your mind. The reason really doesn't matter. My opinion is.....suck it up and follow through with your quotation. Just about any business would. If you lose money then at least it preserves the customer relationship for the next order.

I don't need anyone telling me that a substitute part is what I ought to have just becasue YOU would use it. That's infuriating and in my opinion it's insulting as well. Some of us do know how to build a car. It's OK to suggest but give the customer what he wants whether YOU like it or not.

Bottom line......When you discovered the error you should have called me, apologized for the error and try to work it out. If we couldn't work it out you should have stuck by your quoted price. Instead, you come here. The time you spent typing here you could have called and preserved your customer. Now what do we have? A bunch of hard feelings, dirty laundry, and a lost customer. Why?

I don't get it George but it is your business to do as you please. I stand by what I said, these types of issues is what hurts AA when they could be easily resolved.

This is just my opinion George and I am not trying to offend you. I'm just trying to get you to see the customers view point. We do have a choice where we spend our money.......and these kind of issues are what makes us call you first when we need parts or call you last.......
akellym
agree.gif
sww914
There are times when only the best will do. On a racecar that I work on, I needed a part for the accelerator linkage. My supplier talked me out of a new $65.00 and gave me a used one for $10.00. It broke. I again asked him to order a brand new one and he insisted that I take another used one, even better than the first, from a 25,000 mile car, just as good as brand new, for free. The new one still hasn't arrived and the 2nd used one is still alive, but I still want the super expensive new one because if my customer spends $2000.00 to go to the track and $1000.00 for me to get him ready to go he'll be mighty pissed if the used part breaks again and he has to come home early.
His argument to me will be- thousands of dollars spent to get there and I have to push the F%^&!#& car on the trailer over a $65.00 part.
I'd be pissed too.
Sometimes it's completely worth the extra money so that you never have to think about it again.
Sometimes the customer actually knows what they want.
thomasotten
Well, it sounds like there was communication on both ends, so I don't see what the deal is.
PeeGreen 914
I don't think there was miss communication on both side at all. I think all the communication errors were on dr914. I think in his business he should have resolved this the best he could with his customer to help his company thrive. I have heard a few other instances of this which is why I try to go anywhere else I can to find the parts I need. I admire and respect AA for having everything they have, but their service just out right sucks.
John
It's really none of my business, but that hasn't stopped me so far...

So here is how the company that I work for operates:

The company that I work for sells things (big things, but things none the less).

Salesmen quote prices to customers on these things.

When a salesman quotes a thing to a customer, the salesman is supposed to quote a price that is our cost plus a fixed markup. The markup is supposed to cover the cost of doing business.

When the customer accepts the pricing from the salesman, a purchase order is placed. The placement of the order is a contract. If the price the salesman had quoted is found to be less than what it was supposed to be, it is the responsibility of the salesman or our owner to resolve the price difference by contacting the customer and working it out. Sometimes it means that we eat the mistake, other times the customer approves the difference in cost. Still other times, a mutually agreed to settlement is made. The order is simply not canceled. It would still be up to the customer to cancel if that is the resolution they wish to accept.

We try to work with our customers to resolve issues because we value our customers. Because of this value, we have customers that are loyal to us.

This is simply the way we do business.




As far as I know, every sale is a contract. One party offers goods or services for a price, and the other party agrees to the price. When that happens, both parties have entered a contract.



These are my opinions....

and that is all I have to say about that.


914-8
You took the e-mail communications between you and your customer, and started a thread on the internet with it (i.e., Post No. 1 in this thread)?!?
r_towle
I sell for a living.
These mistakes happen.
If its huge, or big enough to be impossible to eat the mistake, we do call and either work it out, or cancel.
If we can absorb it , we do, without any phone call.

Results.
If its small the mistake comes out of the sales guys money.
Or sales guy gets fired.
Pricing process is fixed.
Communication regarding pricing is very thorough.
We attempt to not do the same thing twice.

Rich
drive-ability
While you may run a good business, treat your customers right theres always someone dissatisfied with something. We have all been undercharged at some point from time to time. I'm sure many point out the mistake and pay the correct price. They made a mistake and had to correct it. Yes it was about the price, its a business and as such needs to act as one... I would love to get something for a price that seems odd but realistically speaking it should be understandable a correction needed to be made. smile.gif
grantsfo
In my 27 years of owning 914's I have never purchased anything from AA. I suspect that wont change soon based on this crazy exchange?
DanT
QUOTE(grantsfo @ Jun 15 2007, 11:26 PM) *

In my 27 years of owning 914's I have never purchased anything from AA. I suspect that wont change soon based on this crazy exchange?

agree.gif a very sad exchange....I wonder why this thread was begun to start with?

huh.gif
MoveQik
QUOTE(PRS914-6 @ Jun 15 2007, 03:43 PM) *


Your staff quoted me under $100.00 to ship the part to me and said they were in stock. I ASKED 3 TIMES IF THIS WAS AN OEM SWITCH After 3 yes's, I said I'll pay the extra and take the OEM. She takes the order, my credit card # and gives me a order confirmation #189135 I assume it's a done deal.


Welcome to the club. I had the same thing happen to me a couple of years ago. After several calls to get a straight answer, he had the nerve to call me a belligerent customer??? God forbid a customer expect what they were promised. I wish I was making this up...but I'm not. Like many, I will NEVER buy from them again. My car will sit on jackstands before they get a single penny from me.
PRS914-6
I want to be clear on something here.......

The Porsche retail price of this switch is $75.26 and I was quoted close to $100.00 delivered from AA. (a fair price for NLA and I was willing to pay) Aftermarket prices run as low as $28.00 from numerous sources.

I was not trying to cut a fat hog in the ass by taking advantage of a "misquote". It was my full understanding that I was paying MORE than Porsche retail but hey it was NLA.

George apparently paid $165.00 for the remaining 20 switches of Porsche stock and nobody but George knew that and I certainly didn't know. His staff and computers obviously didn't know either. It's understandable that nobody wants to take a loss but the way this was handled stinks. sheeplove.gif

As for posting the correspondence here..... confused24.gif Bad business. I suspect George thought I might tell the story here and decided to jump out for damage control.. It's just too bad the effort wasn't put to better use. I just don't get it.

nuff said on this one....
MoveQik
Sorta funny...the Dr tried to come back on the scene and reinvent himself. You knew it was just a matter of time until the REAL Dr showed back up. Nice....really nice.
So.Cal.914
QUOTE(drive-ability @ Jun 15 2007, 10:09 PM) *

While you may run a good business, treat your customers right theres always someone dissatisfied with something. We have all been undercharged at some point from time to time. I'm sure many point out the mistake and pay the correct price. They made a mistake and had to correct it. Yes it was about the price, its a business and as such needs to act as one... I would love to get something for a price that seems odd but realistically speaking it should be understandable a correction needed to be made. smile.gif


agree.gif
addwestern
I don't know how odd the price was.

IMHO- Sometimes, just sucking it up on one and fixing the problem is the best avenue. Sometimes, you have to look at the bigger picture and wear one if you make a mistake- that repeat customer will spend ten fold- I'm sure this exchange will end up costing AA much more than $65 by folks reading the thread.

I know the project Paul is working on- and I know he wants the best- I've supplied some of his parts. I've known others who want a new windshield- they can call there local glass supplier and get a PPG- but they want a factory spec windshield. Little differences in aftermarket parts frequently arise during early stages of use.

I've sold some stuff cheaper than what I have paid for it- but give the customer the option- even say- Hey- we screwed up on that one, but I want to make it right. That customer will leave feeling more than satisfied and will either tell others about it- or develop some loyalty toward you. There are many options of where folks spend their money.
rhodyguy
1. the thread is damage control. but before the shit storm starts.
2. if your pricing sheets are out dated, FIX THE PROBLEM. delegate.
3. bordering on 'Bait and Switch'.
4. remove the items from YOUR availability list.
5. how YOU can refuse to sell a part YOU list as available, because YOU feel it's too expsensive, is beyond me.
6. this thread could have been the complete opposite. you had the chance to sell just 1 of them, at the advertised price, ate the $80 some odd loss (chump change for a high roller. write the sale off as a - at tax time), change the pricing immediately after, and had a customer that was more than pleased. actually, this thread wouldn't even exist and the firm had the op to bank some love. you may have even had to endure a "george/aa did the right thing by me" thread. penny wise, pound foolish. your marketing director must be headbang.gif .

k
Johny Blackstain
Perhaps the 2 of you have been married too long & it's time to face a divorce? laugh.gif Gentlemen... you sound like an old married couple. rolleyes.gif


cool_shades.gif
TROJANMAN
So the guy made a mistake.............BFD

I once made the mistake of paying twice the retail price for a windshield seal because the seller
misrepresented it as being NLA. ph34r.gif
Personally, whether I was right or wrong, I would always try and do the right thing between me and another club/world member before airing it out in public.
This is a small community, and the profits made are not as important as the karma kept.

You live, you learn.
SLITS
What this comes down to is the same story that has been told on various boards over the years. AAs' philosophy is that we need them and they don't need us as demonstrated by their business practices.

So make it happen ..... don't buy from them.

You can post all the whines and bitches you want .... it isn't going to change the attitude or basic philosophy that AA operates on.

And George, don't take this as a personal attack .... it's just an observed statement of your philosophy of business that you hand down to your employees. It is neither good nor bad; it just is.

You nor any of your minions coming here or anywhere else with "new" propaganda will sell the pig. You can put whatever dress you want on it but it is still a pig.

rhodyguy
and that, as they say in texas, is "how the cow ate the cabbage".

k
dr914@autoatlanta.com
I sincerely appreciate all of the comments. That is why I posted this so that everyone could have a say about our company good or bad and get it off of their chests.

914-8
Starting a thread on the internet, where you start by posting your e-mail exchange with a customer, is highly unprofessional and makes you look bad.
black73
QUOTE(914-8 @ Jun 16 2007, 03:24 PM) *

Starting a thread on the internet, where you start by posting your e-mail exchange with a customer, is highly unprofessional and makes you look bad.


I disagree. I think George realized there had been a mistake, admitted it publicly and is now taking his beating like a man.
914Tom
QUOTE(914-8 @ Jun 16 2007, 03:24 PM) *

Starting a thread on the internet, where you start by posting your e-mail exchange with a customer, is highly unprofessional and makes you look bad.


agree.gif

WORD.
KELTY360
QUOTE(dr914@autoatlanta.com @ Jun 16 2007, 11:01 AM) *

I sincerely appreciate all of the comments. That is why I posted this so that everyone could have a say about our company good or bad and get it off of their chests.


This doesn't wash at all. You just want people to vent without recognizing the validity of the complaint? That's the same as telling us to pound sand cause you'll do whatever you damn please anyway.

In this case you're telling the customer he's stupid for knowing exactly what he wants and having the gall to insist on being sold that item. If you're going to put a part into your computer inventory then you'd better be willing to sell the part. The fact is that a contract was made, and confirmed. Stand by it and don't make some pretense about protecting the customer from himself.

aircooledboy
QUOTE(rhodyguy @ Jun 16 2007, 10:04 AM) *

6. this thread could have been the complete opposite. you had the chance to sell just 1 of them, at the advertised price, ate the $80 some odd loss (chump change for a high roller. write the sale off as a - at tax time), change the pricing immediately after, and had a customer that was more than pleased. actually, this thread wouldn't even exist and the firm had the op to bank some love. you may have even had to endure a "george/aa did the right thing by me" thread. penny wise, pound foolish. your marketing director must be headbang.gif .



No question. This whole line about "integrity" smells very bad. To be clear: Your people screwed up a price quote, you can ship the part because you have it, and the loss would be about $85, but your "integrity" prohibts you from allowing the deal to be honored? George, sometimes I sell the unbelievable for a living, and I wouldn't try to sell that one on bet.

I was pretty glad to have you here George, and willing to give you a chance to prove your mudd. But I've got to say, the only way you turn around a major black eye here is to honor the deal. Anything else is close to concrete proof your only real desire is to sit on those switches until you preceive a chance to maximize the future benefit you can get from holding them.

Your move George. confused24.gif
customstarr
My two cents (not that it matters)...

Mistakes happen, and only George and God know the real reasoning behind it. If I were George, I'd send the damn part & make a customer happy - that goes a long, long way for future business from word of mouth.

The fact that George posted the details here on this forum = total fuching bull. If he did that to me, you can belive that I would NEVER do business with him again. Period. And if it was worth losing an actual customer for a few bucks, than he's a very poor business minded man. There is a ton of competition out there (even in the 914 world), and it is stuff like this that makes me look elsewhere.
Twystd1
I am so pissed I don't know what to write.

George, don't break your word. That includes your employees word.

AA fucked up. Not the purchaser. Honor the commitment. Give the man his goods for the agreed price.

All this for an 80 buck difference worth of NLA parts...?????
Is breaking your company's commitment to honor it's word worth the 80 bucks?

Based on facts....... Apparently.... YES.

That is a sad commentary on what men will do to retain things.
Where is the honor in that?

Clayton





jonferns
Its $80 George...
boxstr
My wife recently read a book written by Paula Dean, successful cook and restaurant owner, TV show Host, HGTV. She said, to be successful in a service business, you have to be willing to humble yourself and think of yourself as a servant to the people you are dealing with.
I feel I am a servant to anyone I deal with when it comes to purchasing items from CAMP 914. I will go out of my way to make sure the customer is happy, I want to make sure they will come back because of a good experience with me.
Craig C. Laughlin CAMP 914
krazykonrad
Anyone ever notice that the other major 914/ Porsche suppliers seem never to have these type of type of threads? AA has got em about once a month.
Konrad
dr914@autoatlanta.com
QUOTE(aircooledboy @ Jun 17 2007, 07:09 PM) *

QUOTE(rhodyguy @ Jun 16 2007, 10:04 AM) *

6. this thread could have been the complete opposite. you had the chance to sell just 1 of them, at the advertised price, ate the $80 some odd loss (chump change for a high roller. write the sale off as a - at tax time), change the pricing immediately after, and had a customer that was more than pleased. actually, this thread wouldn't even exist and the firm had the op to bank some love. you may have even had to endure a "george/aa did the right thing by me" thread. penny wise, pound foolish. your marketing director must be headbang.gif .



No question. This whole line about "integrity" smells very bad. To be clear: Your people screwed up a price quote, you can ship the part because you have it, and the loss would be about $85, but your "integrity" prohibts you from allowing the deal to be honored? George, sometimes I sell the unbelievable for a living, and I wouldn't try to sell that one on bet.

I was pretty glad to have you here George, and willing to give you a chance to prove your mudd. But I've got to say, the only way you turn around a major black eye here is to honor the deal. Anything else is close to concrete proof your only real desire is to sit on those switches until you preceive a chance to maximize the future benefit you can get from holding them.

Your move George. confused24.gif



When the Lady "receptionist" (for lack of a better word) quotes a price from the Porsche price list that does not mean that we have it in stock NOR is the price current. Many parts listed in our Porsche factory price list are showing 1.00 when they originally sold for thousands of dollars. We are obgligated to use the factory price tape and that is what happens. People always understand. What is going on here? There was no deal, no confirmation of stock at that price from the "clerk" and I myself had been e mailing the guy.......... Porsche will not honor their price list for the unobtainable and neither will we. We have many many new old stock parts that are still listed in the porsche price system for very laughlingly low amounts. That does not mean that we are going to sell them for these amounts, again COME ON!
By the way I bought the switches for samples to have repros made not to resell and rob someone of their money by selling an overpriced piece easily substituted with the 45 dollar one. I never offered these for sale at any price anyway. (I am sure that from now on all aftermarket companies will substitute the later switch for the earlier one anyway)
mzapisek
George,

Whatever happened to the "customer is always right" mentality. If you have a receptionist working for you quoting part prices then you are at fault. It's your business and your folks. If there is a breakdown in communication caused by the wrong people giving out info on your end - you should fix it.

I don't know what your paying yourself but even at $10.00 an hour you have already cost yourself more the the $80.00 price difference with this can of worms.

When I send someone an email I consider it privileged. Your an absolute idiot for breaking the trust of a customer in such a public forum.
PeeGreen 914
I cannot believe this is still going on and AA is dragging it on. The fact it was even posted on here is bad enough. Why should any of us want to do business with you? If it wasn't for the fact that you have parts that cannot be found anywhere else I am sure that we would all go elsewhere. This is a perfect example of bad business.
jonferns
QUOTE
By the way I bought the switches for samples to have repros made not to resell and rob someone of their money by selling an overpriced piece easily substituted with the 45 dollar one.


George, its not your money thats being spent on the switch. If someone is willing to pay extra for something specific they want then so be it.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2024 Invision Power Services, Inc.