LEDs and housings in stock see post 48----GB ENDS 8/1/17, Got more back in for those that need them Options

[Mikey914]

I've been able to source some very good LEDs for our car. It took some trial and error, but have been able to locate and check fit to assure these will work on our cars

Option 1-
I have H4 housings just want LEDs I know will fit without any issues - Not DOT approved 2600 lumens- $32 per bulb

Option 2-
I have H4 housings want the BEST LED I know will fit that DOT approved Watertight 3000 lumens
$48 bulb

Option 3-Plug and play Jeep series LED complete housed unit DOT approved 3000 lumens
$98 per unit.


For those that want New H4 no sealed beam housings we are looking at buying in bulk and providing at cost. So don't worry if you don't have an H4 housing. They are not that expensive, and we will try to get the best price possible for them.

We may be able to do better on these is we can get some volume, but wanted to test the waters.

Pictures to follow

[DRPHIL914]

ok trying to clarify-
the high beam will not come on - or I should say it will not stay on - when I pull the lever on the stearing column, you hear the click - and the high beam does come on on the right side bulb- that one is still the original bulb not converted yet- so the relay must be working - but on the left side- drivers side that hast the LED hooked up, it does not- BUT if I hold the lever back and don't release it then the led high beam turns on - but releasing the lever it goes back off-
- it seems to be in the circuit of the LED- im going to hook up the other on on this side to see if it does the same thing - I will try this tonight - will see the result - I will also hook back up a standard bulb if that works high and low, but the LED does not then it is not my car, it is something int he LED wiring and the 914 that is not compatible- maybe the flasher conversion is the problem/??
Maybe someone else here , Jim Hoyland? I think he did the flasher conversion on his car same time I did mine - ( flasher conversion- where you can run the fogs with out lights being on and if you pull the lever it will flash the fogs)

Thanks for the input