With wheel on (flat tire)

Click to view attachment


I just saw this the other day at a Toy's r us...

Click to view attachment

This showed up at USPS...

The yellow lights are cheap reproductions that I bought on ebay for 10 bucks shipped to Puerto Rico.... Looks nice...but one have a "mosquito" embedded....!!!

I can not ask more for the price...

Click to view attachment

Does anyone have a schematic for the wiper motor?

Installed the filler neck....

Put a new alternator in... I'm supposed to receive today a new master cylinder since mine was corroded during the waiting years... Will be working on that during this week.

That's it for now...
Click to view attachment

Can't believe I have not post since November 2014, well I being doing some work... there she is...

Click to view attachment

I had to do a cover for the fire walll..... So here you will see what I have done...


Click to view attachment

Firewall mold (cast, mould....what ever you call it.....)



Click to view attachment

Click to view attachment

Then I cover everything with aluminum tape.... Covered with resin and lay the fiberglass

Click to view attachment

Click to view attachment

Taking this appart wasn't easy...

Click to view attachment

Ready to be trimmed.

Click to view attachment

Click to view attachment

I tested fitted and have more than an inch of space....

Click to view attachment

Trimmed

Click to view attachment

Bondo'ed... painted and cover it....

Click to view attachment

trimmed the fabric...

Click to view attachment

Test fitted...

Very happy with the product...

Click to view attachment

The worked on a basket for my radiator, using metallic mesh to make the structural form...



Click to view attachment

radiator basket
Click to view attachment

nother

Click to view attachment

another
Click to view attachment

There she is with the radiator on.... all dirty... we are passing with one of the worst dry season in about 10 years... So will be dirty for a couple of months....

Click to view attachment

Now.... lets work on the upper exhaust.... I used an old surf shirt Im not using anymore as my mold.... (Quicksilver BTW)

Click to view attachment

stretch the shirt... and hold it with screws,,,,,


Click to view attachmentClick to view attachment

This is how it looks after resin and a single layer of fiberglass on the inside...

Click to view attachmentClick to view attachment

Another

Click to view attachment

Did external fiberglass layers....

Bondo it, Sorry no pics of the bondo process... But was time consuming!!!!

Click to view attachment

On the car.... I tape it on the car to see if it clears the cross bar... and it did... Im going to fix the radiator fan to this shroud and fix the shroud on the bonnet....

Click to view attachment

Installed the mufflers also....

Click to view attachment

And did the front signal lights wiring and fitment...

Click to view attachment

No pics of .... but did relocate the fuel pump to the front (behind the radiator basket).

I will be working this weekend sealing the gas tank with the KBS system, also will be installing the axles.... and some body work to do....


That's all for now....and thanks for watching..>!!!!!!!!!

Great work on the hood vent!

Thanks!!!

Here are some updates...

I sealed my gas tank with the KBS product and I'm very satisfied with the results.

Here are some pics from the tank inside:

Click to view attachment Click to view attachment

Prepare the tank to be painted.... maybe during the weekend....

Click to view attachmentClick to view attachment

Relocated the fuel pump to the front!

Click to view attachment

Did all the wiring routing on the front....

Click to view attachment

Did some repairs on her back...

Click to view attachmentClick to view attachmentClick to view attachment

Another

Click to view attachmentClick to view attachment

Installed the axles...

Click to view attachment

And fire her up...


https://www.youtube.com/watch?v=RPgjQ9a7qvU


I found a leak and there was a puncture on the radiator. It was sitting around for years... no wonder...

Will repair it on the weekend!!!

At least it moves!!!!

Very nice build!

Have not post since September 2015, long story short. I found an SVX with a running engine, busted tranny for a thousand bucks.

Click to view attachment


Pulled out the wiring and computer

Click to view attachment

And pulled out the engine.

Click to view attachment

Now here is where the fun begins... Wiring. It took me 3 day (2 hours daily). I had all the schematics and some internet reference regarding EG33 engine wiring swaps.

Click to view attachment

Pulling out all the tape was tedious!!!

Click to view attachment

What was removed!

Click to view attachment

After excess wire was removed.

Click to view attachment

Click to view attachment

Engine mount development. I used the old V8 cradle to do this one.

Click to view attachment

Click to view attachment

Click to view attachment

Tranny adapter

Click to view attachment

Test stand

Click to view attachment

First attempt to start up (with carburator cleaner)

https://youtu.be/WwEpx5VhkyQ

Fitting the engine....

Click to view attachment

Mounted

Click to view attachment

Wiring

Click to view attachment

More wiring

Click to view attachment

First Time running....
https://www.youtube.com/watch?v=Yn8VEd1jXkg
https://www.youtube.com/watch?v=5FbWeszdqDE

I'm going to fit the fuel tank tomorrow and do some tunning on the shift cables.

BTW the exhaust is from the original SVX and just for testing purposes....


Some picks of the fuel tank:

Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment

So I had a great deal for a complete drive train of a WRX 2006 and went for it.

Sold all the parts,but the tranny (of course), and started swap from the 901 to the limited WRX tranny.

Here is my thread regarding the AWD to FWD conversion.

http://www.914world.com/bbs2/index.php?sho...=298248&hl=

Looks like I'm having problems with global limit space and cannot post more pictures... So this is what I done to the car:

1)WRX 2006 limited edition tranny swap.

2) Used the WRX master cylinder for the hydraulic clutch conversion.

3) Setup my shift linkage. Have to do a little modification to the MR2 shifter since the gear selector was an inch short.

4) And went for a test drive. https://youtu.be/Redejr5qza8

That all happens between June 2016 and 1st of 2017 (working on some weekends)

Now will be putting Loctite on all the nuts, exhaust, get new front tires, aligment, paint.... and run the hell out of it!!!!

Some short videos.

First time driving with my wife, but she didn’t let me squeeze 3rd gear!!! driving.gif

https://youtu.be/NsUQ_aMiV_A

1st and 2nd then 4th cruising, She still scared...

https://youtu.be/cAiKbMAzVi0

I'm still working on the body, some tweaks, need to add an after market temp sensor and gauge, since I don't trust the one I have now. Still need some alignment. But it's running and shifting gooooood!!!

Pic of a month ago:
Click to view attachment

Body work:
Click to view attachment

Very nice!

Put these on!!! 10 inch coilovers with spring helpers. Love how it seats!!! Tomorrow......test drive!

Click to view attachment
Click to view attachment
Click to view attachment

Your lower spring perches are on upside down...
That said, I love the build! I'm using the EG33 also but in a different configuration and I'm nowhere near your stage of the build but I'm trudging along. Looking really good!