Mikey914
Aug 31 2015, 02:50 PM
QUOTE(bigkensteele @ Aug 28 2015, 07:56 AM)
QUOTE(Mikey914 @ Aug 28 2015, 06:53 AM)
Should be this Monday, Going to Ken of course!
Sweet! How bad was the carnage on the original?
It's not pretty, I'll post some pics later
sb914
Aug 31 2015, 04:14 PM
Is today the day?
76-914
Sep 1 2015, 09:49 AM
Nah. Must be today.
Yahmann
Sep 7 2015, 05:38 PM
QUOTE(76-914 @ Sep 1 2015, 08:49 AM)
Nah. Must be today.
Any update Mark?
rick 918-S
Sep 8 2015, 06:15 AM
Massive undertaking. Don't rush it. The end result will be worth the wait.
Mikey914
Sep 8 2015, 08:55 AM
QUOTE(Yahmann @ Sep 7 2015, 04:38 PM)
QUOTE(76-914 @ Sep 1 2015, 08:49 AM)
Nah. Must be today.
Any update Mark?
These are being made the rate is slow but will be picking up. We have 3 that are ready and are awaiting boxes that will be ready tomorrow.
76-914
Sep 8 2015, 09:09 AM
QUOTE(rick 918-S @ Sep 8 2015, 05:15 AM)
Massive undertaking. Don't rush it. The end result will be worth the wait.
Yeppers. I can just imagine the stage they're at currently. "What the Hell. How did that happen?" / "I dunno, the first one didn't do that." / "The first one is 1/4" short".
Mikey914
Sep 8 2015, 09:18 AM
Actually its the metal internals we made like factory, but they are making it hard to demold. We have made some modifications to it to help and have cut the demold time from 6 hours to about 1. Still need to make a tweek or two but these are not just popping out of the mold. This is the only thing that is slowing up production. We will be starting to crank these out but if we fine tune the process before mass production
76-914
Sep 8 2015, 09:20 AM
QUOTE(Mikey914 @ Sep 8 2015, 07:55 AM)
QUOTE(Yahmann @ Sep 7 2015, 04:38 PM)
QUOTE(76-914 @ Sep 1 2015, 08:49 AM)
Nah. Must be today.
Any update Mark?
These are being made the rate is slow but will be picking up. We have 3 that are ready and are awaiting boxes that will be ready tomorrow.
WOW! Perfect timing for me, Mark. I wanted this to happen while I'm installing the AC and it looks as if it will. Hot Damn, I'm stoked.
Mikey914
Sep 8 2015, 09:29 AM
Yes I posted once we pulled the 1st plug and had anticipated that since we had duplicated the factory metal it would be just popping them out as the plug was out on less than 60 seconds. I knew the metal would add a little time to it. but it was just too rigid so we redesigned and made metal. That's what we are pulling now and it's finally getting to something that resembles production we need to be able to pull 3 a day minimum as there are 60 of you that I need to fill orders for. I saw this with the bumper tops when we started them and and have improved the process the point we can get up to 4 a day with them. They originally were 2-3 a week.
euro911
Sep 8 2015, 12:52 PM
Take as much time as you need, Mark. Maybe the shift console covers will be ready to ship by then and you can toss it as well as the other goodies in my order all in the one big box
GregAmy
Sep 9 2015, 07:48 AM
No rush on mine either, Mark. I'm dealing with racing at Daytona this month and would not be able to get to it until late October anyway, so it's a winter project. Put me at the end of the queue. - GA
MJHanna
Sep 10 2015, 08:29 AM
Well I just bought another 914 and it needs a new dash. Please put me down for one.
Thanks
Mark
76-914
Sep 10 2015, 03:50 PM
You know what would be good right about now? A big old juicy picture of a, and in my best Don Pardoe imitation, Neeeeeeuew Dash!
76-914
Sep 11 2015, 04:46 PM
Has anyone received theirs yet?
bigkensteele
Sep 11 2015, 07:05 PM
QUOTE(76-914 @ Sep 11 2015, 02:46 PM)
Has anyone received theirs yet?
I am supposed to get the first one, and it hasn't arrived yet. I haven't been bugging him, since I don't need it right away, and I know that he is just as eager to get them out as we are to receive them. He was waiting on custom boxes, and that can take time as well.
Let's let Mark enjoy his son's wedding weekend and not have to worry about us product-hungry tools.
lonewolfe
Sep 11 2015, 07:12 PM
Absolutely let Mark enjoy this weekend. I had no idea he was old enough to have a son getting married! Cool your impatient jets for a few days! Mark always delivers! I know, it's like being a kid waiting to open your presents under the Christmas tree or Hanuhkah Bush that you've been looking at and shaking for the last couple of weeks! Hang in there a little longer!
76-914
Sep 12 2015, 08:22 AM
I agree on letting Mark enjoy the wedding. I really didn't expect him to even read this until next week. Just was wondering if anyone had so they could post a pic.
Mikey914
Sep 12 2015, 08:35 AM
QUOTE(bigkensteele @ Sep 11 2015, 06:05 PM)
QUOTE(76-914 @ Sep 11 2015, 02:46 PM)
Has anyone received theirs yet?
I am supposed to get the first one, and it hasn't arrived yet. I haven't been bugging him, since I don't need it right away, and I know that he is just as eager to get them out as we are to receive them. He was waiting on custom boxes, and that can take time as well.
Let's let Mark enjoy his son's wedding weekend and not have to worry about us product-hungry tools.
Ken, Matt is bringing yours with him on the plane Thursday. We are bringing a minor blem to give away and one other dash. When Matt returns this next week we will be shipping out at least the next 4. And production will go up from there.
Mark
76-914
Sep 21 2015, 10:36 AM
The Monday morning bump.
rmdinmd
Sep 21 2015, 11:08 AM
saw them and the bumper tops at the teenerfest and they look great.
another great product from 914 rubber.
glad I ordered them
now we just have to be patient, the hardest part.
v82go
Oct 8 2015, 09:58 AM
Just curious whats up with these ?
Anyone install theirs yet ?
Bob
Yahmann
Oct 8 2015, 01:24 PM
I was wondering myself. It's been awhile since an update or status report.
76-914
Oct 8 2015, 02:59 PM
Mark PM'd me this morning to say that mine was shipping today.
sb914
Oct 8 2015, 03:17 PM
Mblizzard
Oct 8 2015, 03:32 PM
QUOTE(v82go @ Oct 8 2015, 08:58 AM)
Just curious whats up with these ?
Anyone install theirs yet ?
Bob
Got mine but I have just been too damn busy to install. Heading to Japan soon so it wont happen this month! But it is a thing of beauty!
sb914
Oct 8 2015, 04:07 PM
QUOTE(Mblizzard @ Oct 8 2015, 02:32 PM)
QUOTE(v82go @ Oct 8 2015, 08:58 AM)
Just curious whats up with these ?
Anyone install theirs yet ?
Bob
Got mine but I have just been too damn busy to install. Heading to Japan soon so it wont happen this month! But it is a thing of beauty!
We need a pic?
Mikey914
Oct 9 2015, 01:35 AM
Yes, taking longer than we had planned but finally getting product out. got 2 of these out today, the rest tomorrow. I may have 2 rejects, but I have to see how they cure. part of the metal issue we were dealing with, each one gets better. We plan to ship 10 next week, and keep that pace until filled, of not pick it up. We ran out of material this week, but it should be here tomorrow. I did get tracking to confirm, just depends on if we get in the afternoon or morning if we get another day of production this week.
Mikey914
Oct 9 2015, 01:37 AM
Also for the install, we got a great video of Brad Mayer showing how it installs on a dash that is out of the car. You can see the attachment points from the back while he's reaching in. really cool. Matt is getting it edited now.
sb914
Oct 9 2015, 05:34 AM
QUOTE(Mikey914 @ Oct 9 2015, 12:37 AM)
Also for the install, we got a great video of Brad Mayer showing how it installs on a dash that is out of the car. You can see the attachment points from the back while he's reaching in. really cool. Matt is getting it edited now.
Seven
Nice job mark they look amazing.you're the man.
AZ914
Oct 9 2015, 08:35 AM
Excellent! Looking forward to getting mine!
76-914
Oct 9 2015, 08:44 AM
QUOTE(Mikey914 @ Oct 9 2015, 12:35 AM)
Yes, taking longer than we had planned but finally getting product out. got 2 of these out today, the rest tomorrow. I may have 2 rejects, but I have to see how they cure. part of the metal issue we were dealing with, each one gets better. We plan to ship 10 next week, and keep that pace until filled, of not pick it up. We ran out of material this week, but it should be here tomorrow. I did get tracking to confirm, just depends on if we get in the afternoon or morning if we get another day of production this week.
Happy days! It looks as if the 2nd from the bottom is bent at the edge of the ashtray slot.
Mikey914
Oct 9 2015, 09:52 AM
QUOTE(76-914 @ Oct 9 2015, 07:44 AM)
QUOTE(Mikey914 @ Oct 9 2015, 12:35 AM)
Yes, taking longer than we had planned but finally getting product out. got 2 of these out today, the rest tomorrow. I may have 2 rejects, but I have to see how they cure. part of the metal issue we were dealing with, each one gets better. We plan to ship 10 next week, and keep that pace until filled, of not pick it up. We ran out of material this week, but it should be here tomorrow. I did get tracking to confirm, just depends on if we get in the afternoon or morning if we get another day of production this week.
Happy days! It looks as if the 2nd from the bottom is bent at the edge of the ashtray slot.
Yes so far it's sitting on the bench still, gonna set it aside, the mold has a lot of surface area with that texture and it is difficult to remove. As the texture is pretty fine the amount of mold release we can use in minimal. We actually wound of making our own release agent on this. It's never as easy as it looks.
Mikey914
Oct 9 2015, 06:56 PM
2 more out today, will be shipping next group out next Thursday, we're finally getting momentum, the materials came in today too
euro911
Oct 9 2015, 07:08 PM
QUOTE(76-914 @ Oct 9 2015, 07:44 AM)
Happy days! It looks as if the 2nd from the bottom is bent at the edge of the ashtray slot.
Mark told my that one's yours, Kent
fixer34
Oct 9 2015, 07:09 PM
OK, I'll admit I didn't read all 15 pages...
Is there a replacement available for the early models, a '70 -6 in particular. Looks like I may be in for an end of year bonus, so I'll have some money to spend...
Mikey914
Oct 9 2015, 11:18 PM
We actually fitted the dash on an early car. It does fit but the glove box cut out is a little different. You can see it in the pictures. Also the glove box will open too.
EdwardBlume
Oct 10 2015, 06:29 AM
Looking forward to getting mine.
Not looking forward to installing it.
Kansas 914
Oct 10 2015, 07:21 AM
QUOTE(RobW @ Oct 10 2015, 06:29 AM)
Looking forward to getting mine.
Not looking forward to installing it.
I can't wait to install mine. My project is stalled until I get it.
EdwardBlume
Oct 10 2015, 08:13 AM
QUOTE(Kansas 914 @ Oct 10 2015, 06:21 AM)
QUOTE(RobW @ Oct 10 2015, 06:29 AM)
Looking forward to getting mine.
Not looking forward to installing it.
I can't wait to install mine. My project is stalled until I get it.
I hope you have small hands....
AZ914
Oct 10 2015, 08:41 AM
QUOTE(RobW @ Oct 10 2015, 07:13 AM)
QUOTE(Kansas 914 @ Oct 10 2015, 06:21 AM)
QUOTE(RobW @ Oct 10 2015, 06:29 AM)
Looking forward to getting mine.
Not looking forward to installing it.
I can't wait to install mine. My project is stalled until I get it.
I hope you have small hands....
Oh oh...
Kansas 914
Oct 10 2015, 08:44 AM
QUOTE(RobW @ Oct 10 2015, 07:13 AM)
have small hands....
I don't but my helper does......
I have taken 3 or 4 of them off when parting out cars (now those cores are worthless
) and it is tight going.
Anxious to see the video that Brad did to see there there are some tricks/hints.
76-914
Oct 10 2015, 03:52 PM
sb914
Oct 10 2015, 04:50 PM
NFBrown
Oct 10 2015, 06:34 PM
Mine came this morning. Thanks Mark
Nick
lonewolfe
Oct 10 2015, 07:13 PM
Hey Mark!
I'm still waiting on mine. I believe I was the second person to pay. At least I'm the second person that posted that they paid.
Mikey914
Oct 11 2015, 11:17 AM
QUOTE(lonewolfe @ Oct 10 2015, 05:13 PM)
Hey Mark!
I'm still waiting on mine. I believe I was the second person to pay. At least I'm the second person that posted that they paid.
If you were the second that paid yours shipped. There was quite a few that paid immediately. I suspect that if it hasn't it's in this next group. I can check Monday when I'm back in. Drop me a pm with the full name. It's often difficult trying to figure out you you are from your username. I know you've bought a bunch of stuff from me but putting the two together is not always easy
Thanks
Mark
76-914
Oct 14 2015, 08:16 AM
Thought I'd throw out some Dash Porn for those of you in waiting. I'll hold off on final evaluation until I get it installed this weekend but....................everything thing I can see looks TOP NOTCH. You've exceeded my wildest expectations, Mark!
Click to view attachmentClick to view attachmentClick to view attachmentClick to view attachmentClick to view attachmentClick to view attachmentClick to view attachmentClick to view attachmentClick to view attachmentClick to view attachment
aharder
Oct 14 2015, 09:57 AM
Sweet !! Can't wait until i get mine
euro911
Oct 14 2015, 12:57 PM
QUOTE(AZ914 @ Oct 10 2015, 07:41 AM)
QUOTE(RobW @ Oct 10 2015, 07:13 AM)
I hope you have small hands....
Oh oh...
...
.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.