QUOTE (Crazyhippy @ Oct 3 2005, 08:53 AM)

Add one more to the list. Bringing a lil floor jack, and uhhh.... well a floor jack. These things are really easy, all the hard bolts have been covered thus far. See everyone sat. BJH

You going to be over Hippy? Would nice to meet another person. I would like to get an idea of how many will be there. Want to make sure I got plenty of food and beer... Looking forward to puting faces with names..

The Warden approved it (thanks dear), so i'm there.

It's a nice drive from Camarillo.

BJH

QUOTE (Crazyhippy @ Oct 3 2005, 09:11 AM)

The Warden approved it (thanks dear), so i'm there. It's a nice drive from Camarillo. BJH

Ah I also refer to my wife as the Warden. Great look forward to meeting you. Should be a nice turn out...

NOTE TO Bmunday:

I'm in this for the food. I know nothing about cars.
I think Aaron is a fictional charachter of some guy named Skline.
The parts I have in my storage are for an Edsel.
I heard your cousin was hot.
My real name is Richard Simmons and I hang out at 914 events to feel important.

Twystd1


Hey... if you can order a battery tray from PP or HPH or wherever you can get one before Saturday..

Maybe someone will loan us a MIG and we can throw it in...

Anyone have a PORTABLE MIG 110VAC?????

Hey, bmunday,

Do you have the tools to grind and clean metal?

Do you have a compressor?

Do you have a cute neighbor chick that likes middle aged men?
(Don't even go there Slits)

Do your friends really call you Bmunday?

See ya on Saturday... WHAT TIME BRO?

And it looks like MattR may come on down to lend some kind of wierd relational data nano scripting to your blinker fluid. He was with Albert tonight and said he might show up..

Just spoke to Skline. He might be coming also. I will let ya know whom I KNOW is coming on Friday.....

LateRZzzzz.

Twystd1

Well, my prior commitment for saturday is on. I'm helping fellow board member kdfoust install a flat six into his ride. I'm sure you guys will have enough folks to assist. I was REALLY looking froward to meeting a bunch of 914 guys. I'm on the bay window forum over at teh samba and we're all spread out across teh country. I never meet anyone...

Not to highjack or anything thing but...It did take 3 of us 6 + hours to get the engine out. The car had to be jacked up a rediculous amount to get everything to clear. The jacking by itself took 25 minutes! We had to cut pieces of wood to put under the jack stands and stack them safely ect. It probably took a good hour to unhook everything and do the labels too. ( L-jet).

If you guys can get it out in an hour, I'd like to know your technique. granted, we had never done this before but even I was amazed at how diffecult this job was!

I am thinking that you and Kevin should come over at least to watch. If I dont have to work, I will be there. I have dropped an engine and tranny in less than an hour by myself. As the locals will tell you, I had a lot of practice. If I can get my speedo drive gear fixed in the Chalon, I may drive it down, otherwise, it will be the truck and some parts for you. I know I have a good set of rear rotors here. I also have a few jacks and stands too. Tell Kevin (Kdfoust) to wait on his car and then we will all go over to his house and help him with his car. Is he doing the 6 in his green car? I was wondering what happened to him, he used to come out to all of our runs and events. Great guy. I may be working tonight which would put me in line to work again this weekend but maybe it will be Sunday and not Saturday. We will see.

QUOTE (Twystd1 @ Oct 3 2005, 11:25 PM)

And it looks like MattR may come on down to lend some kind of wierd relational data nano scripting to your blinker fluid. He was with Albert tonight and said he might show up..

This is the second time in as many posts where the aadmin and scotty get mentioned in your post above me. Whats up dude!?! After all the things we've... done... this is what I get? Man, you're ugly.

Me and the Mexican will be there. I'll run by Kragen and get some blinker fluid on my way... I'm sure we'll need it.

-I dont exist, but your beer will disapear-

QUOTE (MattR @ Oct 4 2005, 07:58 AM)

QUOTE (Twystd1 @ Oct 3 2005, 11:25 PM) And it looks like MattR may come on down to lend some kind of wierd relational data nano scripting to your blinker fluid. He was with Albert tonight and said he might show up.. This is the second time in as many posts where the aadmin and scotty get mentioned in your post above me. Whats up dude!?! After all the things we've... done... this is what I get? Man, you're ugly. Me and the Mexican will be there. I'll run by Kragen and get some blinker fluid on my way... I'm sure we'll need it.

While your there, can you pick up some horn fluid as well?
Looking forward to meeting some of the people on this board..

QUOTE (Twystd1 @ Oct 3 2005, 11:25 PM)

NOTE TO Bmunday: I'm in this for the food. I know nothing about cars. I think Aaron is a fictional charachter of some guy named Skline. The parts I have in my storage are for an Edsel. I heard your cousin was hot. My real name is Richard Simmons and I hang out at 914 events to feel important. Twystd1 Hey... if you can order a battery tray from PP or HPH or wherever you can get one before Saturday.. Maybe someone will loan us a MIG and we can throw it in... Anyone have a PORTABLE MIG 110VAC????? Hey, bmunday, Do you have the tools to grind and clean metal? Do you have a compressor? Do you have a cute neighbor chick that likes middle aged men? (Don't even go there Slits) Do your friends really call you Bmunday?  :blink: See ya on Saturday... WHAT TIME BRO? And it looks like MattR may come on down to lend some kind of wierd relational data nano scripting to your blinker fluid. He was with Albert tonight and said he might show up.. Just spoke to Skline. He might be coming also. I will let ya know whom I KNOW is coming on Friday..... LateRZzzzz. Twystd1

Ok first and foremost. You hear my cousin was hot?????? Did I miss the buss on that one? You guy's are begining to scare me. Maybe I should tell the wife to gather the dogs and leave for the day...

I don't have a compressor unfortunatley.. Don't have a grinder. Limited to a couple of sanders. I guess I need to invest some cash in tools.. Try to convince the wife of that..
My real name is Brian Munday, bmunday is a bit of a lame screen name I know, but I lack creativity some times.
I was hoping to start between 9:00-10:00 is that to early? I didn't want to take everyones Saturday if they had other things to do. Earlier the better, more time for food drink and socializing. No hot neighbor chicks sorry.... Married mid life.
I don't know JACK about cars, just the basics, but love this car.
No friends call me Bri or "B".

Richard you going to do anther exercise video? You know Leisure World is close by maybe you can drop by for a autograph session... The Blue hairs love you...
All in fun...

QUOTE (bmunday @ Oct 4 2005, 08:25 AM)

No friends call me Bri or "B".

Okay "B"



See you saturday

Hopefully I didn't piss off Twystd...

QUOTE (MattR @ Oct 4 2005, 11:52 AM)

QUOTE (bmunday @ Oct 4 2005, 08:25 AM) No friends call me Bri or "B". Okay "B" See you saturday

Hey Matt..
I was chceking out your Blog, are you driving your teen on Saturday? If not can you bring some more pics...? What color is that? It appears to be the same color as my truck, maybe a little darker, but I can't quite tell... Smoke Grey.. I like it..

QUOTE (bmunday @ Oct 4 2005, 11:55 AM)

QUOTE (MattR @ Oct 4 2005, 11:52 AM) QUOTE (bmunday @ Oct 4 2005, 08:25 AM) No friends call me Bri or "B". Okay "B" See you saturday Hey Matt.. I was chceking out your Blog, are you driving your teen on Saturday? If not can you bring some more pics...? What color is that? It appears to be the same color as my truck, maybe a little darker, but I can't quite tell... Smoke Grey.. I like it..

No go on the teener for saturday. Its still on blocks... but not for much longer Its Seal Grey Metallic, the new porsche color you see on boxsters and stuff. I'll have it up and running someday, so you'll see it on a fun run or BBQ or something.

Twystd1 gets pissed really easily, but whenever he goes off he makes this funny face that makes him look even UGLIER! So we all point and laugh at his expense... its part of the socal group. Clayton is our special guy. You'll find out saturday if he isnt "busy" with some of the younger members

Clayton is our special guy. You'll find out saturday if he isnt "busy" with some of the younger members

So Clayton is special? special in the sense that he likes to experiment with power tools? Likes to play with fire, dresses in ways that would be considered strange?

QUOTE (MattR @ Oct 4 2005, 01:04 PM)

QUOTE (bmunday @ Oct 4 2005, 11:55 AM) QUOTE (MattR @ Oct 4 2005, 11:52 AM) QUOTE (bmunday @ Oct 4 2005, 08:25 AM) No friends call me Bri or "B". Okay "B" See you saturday Hey Matt.. I was chceking out your Blog, are you driving your teen on Saturday? If not can you bring some more pics...? What color is that? It appears to be the same color as my truck, maybe a little darker, but I can't quite tell... Smoke Grey.. I like it.. No go on the teener for saturday. Its still on blocks... but not for much longer Its Seal Grey Metallic, the new porsche color you see on boxsters and stuff. I'll have it up and running someday, so you'll see it on a fun run or BBQ or something. Twystd1 gets pissed really easily, but whenever he goes off he makes this funny face that makes him look even UGLIER! So we all point and laugh at his expense... its part of the socal group. Clayton is our special guy. You'll find out saturday if he isnt "busy" with some of the younger members

Matts car will be ready about the time he graduates from school. So we'll all get to see his car in about 6 or 7 years. Considering he paid a wopping $400 for his paint job, I am really looking forward to seeing it.
Cheers, Elliot

Ok I ordered the battery tray and support from PP, should have them by Friday.
Anyone have a mig welder the might bring over Saturday? Might save me some cash insted of having Joe come over.. So I guess this makes me an official Cheap SOB?

QUOTE (Elliot Cannon @ Oct 4 2005, 01:39 PM)

QUOTE (MattR @ Oct 4 2005, 01:04 PM) QUOTE (bmunday @ Oct 4 2005, 11:55 AM) QUOTE (MattR @ Oct 4 2005, 11:52 AM) QUOTE (bmunday @ Oct 4 2005, 08:25 AM) No friends call me Bri or "B". Okay "B" See you saturday Hey Matt.. I was chceking out your Blog, are you driving your teen on Saturday? If not can you bring some more pics...? What color is that? It appears to be the same color as my truck, maybe a little darker, but I can't quite tell... Smoke Grey.. I like it.. No go on the teener for saturday. Its still on blocks... but not for much longer Its Seal Grey Metallic, the new porsche color you see on boxsters and stuff. I'll have it up and running someday, so you'll see it on a fun run or BBQ or something. Twystd1 gets pissed really easily, but whenever he goes off he makes this funny face that makes him look even UGLIER! So we all point and laugh at his expense... its part of the socal group. Clayton is our special guy. You'll find out saturday if he isnt "busy" with some of the younger members Matts car will be ready about the time he graduates from school. So we'll all get to see his car in about 6 or 7 years. Considering he paid a wopping $400 for his paint job, I am really looking forward to seeing it. Cheers, Elliot

400? Who said 400? Is that viagra making your ear drums stiff?

QUOTE (Elliot Cannon @ Oct 4 2005, 01:39 PM)

QUOTE (MattR @ Oct 4 2005, 01:04 PM) QUOTE (bmunday @ Oct 4 2005, 11:55 AM) QUOTE (MattR @ Oct 4 2005, 11:52 AM) QUOTE (bmunday @ Oct 4 2005, 08:25 AM) No friends call me Bri or "B". Okay "B" See you saturday Hey Matt.. I was chceking out your Blog, are you driving your teen on Saturday? If not can you bring some more pics...? What color is that? It appears to be the same color as my truck, maybe a little darker, but I can't quite tell... Smoke Grey.. I like it.. No go on the teener for saturday. Its still on blocks... but not for much longer Its Seal Grey Metallic, the new porsche color you see on boxsters and stuff. I'll have it up and running someday, so you'll see it on a fun run or BBQ or something. Twystd1 gets pissed really easily, but whenever he goes off he makes this funny face that makes him look even UGLIER! So we all point and laugh at his expense... its part of the socal group. Clayton is our special guy. You'll find out saturday if he isnt "busy" with some of the younger members Matts car will be ready about the time he graduates from school. So we'll all get to see his car in about 6 or 7 years. Considering he paid a wopping $400 for his paint job, I am really looking forward to seeing it. Cheers, Elliot

$400.00 B.S... Hell how is that possible?

he slept with the paint guy

QUOTE (Aaron Cox @ Oct 4 2005, 03:02 PM)

he slept with the paint guy

Paint guy

QUOTE (Headrage @ Oct 4 2005, 02:07 PM)

QUOTE (Aaron Cox @ Oct 4 2005, 03:02 PM) he slept with the paint guy Paint guy

Leave me out of this....

BTW, any of your daughters want a gumball?

i can bring a 110 mig and grinders assuming they fit into the teen....

BJH

QUOTE (Crazyhippy @ Oct 4 2005, 04:05 PM)

i can bring a 110 mig and grinders assuming they fit into the teen.... BJH

you da man crazyhippy

QUOTE (Crazyhippy @ Oct 4 2005, 03:05 PM)

i can bring a 110 mig and grinders assuming they fit into the teen.... BJH

Perfect!!!!
Thanks Hippy..
I need to mount the battery tray, and support, and there is a small holes that needs repair. I will take a couple of pics later tonight of the holes and see what you guy's think...

QUOTE (bmunday @ Oct 4 2005, 04:34 PM)

QUOTE (Crazyhippy @ Oct 4 2005, 03:05 PM) i can bring a 110 mig and grinders assuming they fit into the teen.... BJH Perfect!!!! Thanks Hippy.. I need to mount the battery tray, and support, and there is a small holes that needs repair. I will take a couple of pics later tonight of the holes and see what you guy's think...

i have some 18 gauge sheetmetal i can bring.. 1'x1' or so...

maybe its 20 GA... hmmmm

QUOTE (Aaron Cox @ Oct 4 2005, 03:39 PM)

QUOTE (bmunday @ Oct 4 2005, 04:34 PM) QUOTE (Crazyhippy @ Oct 4 2005, 03:05 PM) i can bring a 110 mig and grinders assuming they fit into the teen.... BJH Perfect!!!! Thanks Hippy.. I need to mount the battery tray, and support, and there is a small holes that needs repair. I will take a couple of pics later tonight of the holes and see what you guy's think... i have some 18 gauge sheetmetal i can bring.. 1'x1' or so... maybe its 20 GA... hmmmm

Go Aaron, go Aaron!!

QUOTE (Headrage @ Oct 4 2005, 06:07 PM)

QUOTE (Aaron Cox @ Oct 4 2005, 03:02 PM) he slept with the paint guy Paint guy

I resent what someone said... cept I forgot what they said. I R old and don't know 2 much sometimes.


Right on about the welder... Good show..!!!!!!!!

Do ya need rotors or brakes? I have some cores for each. Do ya need any small parts? let me know...

Who is bringing the CV tool? Brando?

Note to bmunday.. DON'T have everything ripped out of the car before we get there.
There won't be anything to do ..!!!!!!!!!!!!!!!!!!!

Hey Matt.... Should I see if we have any Kangaroo or Bison left from the Game Feed? That stuff is bad ass good when it's BBQed..!!

Yo, B
I'll see ya arounf 9:30 sat. morning.... Might bring a woman to keep us company...

Oh... never mind.. MattR is coming.....

Twystd1

young guys my ass... Why I outa.....................

QUOTE (Twystd1 @ Oct 4 2005, 04:57 PM)

Hey Matt.... Should I see if we have any Kangaroo or Bison left from the Game Feed? That stuff is bad ass good when it's BBQed..!!

Bring it on. I'll try anything that walked, flew, swam, or grew on this earth.

QUOTE (Twystd1 @ Oct 4 2005, 04:57 PM)

Might bring a woman to keep us company...

Another no brainer!

QUOTE (Twystd1 @ Oct 4 2005, 04:57 PM)

Oh... never mind.. MattR is coming.....  :owned:

Hey, the operation is ALMOST done

I happen to have brandoholios CV tool at mi casa....

i can bwing it....

and the piece of metal i got. we could fab up brians stuff and be done in an hour

AA

QUOTE (Twystd1 @ Oct 4 2005, 04:57 PM)

I resent what someone said... cept I forgot what they said. I R old and don't know 2 much sometimes. Right on about the welder... Good show..!!!!!!!! Do ya need rotors or brakes? I have some cores for each. Do ya need any small parts? let me know... Who is bringing the CV tool? Brando? Note to bmunday.. DON'T have everything ripped out of the car before we get there. There won't be anything to do ..!!!!!!!!!!!!!!!!!!! Hey Matt.... Should I see if we have any Kangaroo or Bison left from the Game Feed? That stuff is bad ass good when it's BBQed..!! Yo, B I'll see ya arounf 9:30 sat. morning.... Might bring a woman to keep us company... Oh... never mind.. MattR is coming..... Twystd1 young guys my ass... Why I outa.....................

Twystd1 No need to worry there will be plenty to do I'msure.ee ya around 9:30....

Bison? I hear that's tasty.....
Should I buy an engine stand? I don't want to spend the cash if it's not necessary. I was hoping the dolly would be sufficient, but I will if necessary. ANy suggestinos on what to buy, without breaking the bank? (I wonder if sirandy can produce an icon smily face squeexing the shit out of a penny?)

GOD... I do so love this place they call the 914Club......

I will see if there is any wild game left at Bills and Phils...
If so... I will bring it along......

If not... No Cigar....

Twystd1

Engine stand not needed. (They are nice to have though)

A CLEAN bench for assembly is needed.

For dissasembly.. A kinda clean bench is needed.

For Aaron... a small bench is needed...........

Twystd1

So.. 10 am....

by 11, or 11.30, we should have an engine out, some battery trays welded in..... and some beer and bbq in the system?

whats next?

QUOTE (Aaron Cox @ Oct 4 2005, 07:22 PM)

So.. 10 am.... by 11, or 11.30, we should have an engine out, some battery trays welded in..... and some beer and bbq in the system? whats next?

Shit I don't know... I need some feedback on prepping for paint. THetcar seems to have about 3-4 coats of paint onit. I think to get a nice finish it should be taken down to bare metal... I'm sure I have pelenty to dobefore I get that far though. Fuel ines, brake lines, etc. I'm sure those need to be replaced.. I am very open to suggestions. I would like to drive the car befoe I retire though.

QUOTE (bmunday @ Oct 4 2005, 07:32 PM)

I would like to drive the car before I retire though.

So much for the pull your motor party then.... once a 914 gets comfortable on jackstands... it's done for

QUOTE (Crazyhippy @ Oct 4 2005, 07:44 PM)

QUOTE (bmunday @ Oct 4 2005, 07:32 PM) I  would like to drive the car before I retire though. So much for the pull your motor party then.... once a 914 gets comfortable on jackstands... it's done for

LOL!!!
Well I want to doo it right, but I want to be able (man my typing sux after I have had a few beers) drive it and workonit at the same time if at all possible..

Ok here are a couple of pics justtook them. Not the greatest, kinds dark, but will give it a shot anyway.

Rotor, is this bad???? I wonder how long he ran without new pads...

Picture on the stands...Hell hole small rust damageon the inner panels.

on stands Hopefully it wont get to uuse to it.

battery damage,needs patch

Is this bad???? Man sweetrotor damage...

YYeeeks... it's done for..

I'll give ya 300 bucks for the whole car......


Ok, Ok, Ok, It's fixable... By anyone other than me. I just talk and act interested.

Looks like if Skline can show up he can give ya some pointers on the rust repair.

Skline IS the real deal.. He welds up and fixes stuff I woulda trashed or given up on.
And it looks spot on.. (unless Aaron helps)

Looks like a good time. Sounds like 10 guys will be there.

Lets see... At 1.5 Lbs of steak per 10 guys. Plus bri's family.. Hmmm That equals 49 Lbs of Prime Steaks. Plus .. Let's see.. 10 guys times 30 beers equals 300 beers plus Bri's family equals 534 beers and two bottles of water for me.....

Dude... you should get this engine pulled for a little under a grand..!!!!

Crap I forgot about the potato salad... Make that a bit over a grand.

OhCrap... I forgot about the shrimp cocktail.... equals 130.00 USD Plus.........

Fugit... Cook burgers......

Twystd1

That rotor is wasted. I have a set here you can have, they will be with me when we get there. If I cant make it, I will give them to Aaron or Clayton and they can bring them down. I may have to work on Saturday. I wont know till Friday night though.

The rust in the engine compartment really isn't that bad. Well I don't think so... THe holes are actually smaller then they appear. The rotos are nothing. Need replacement, just thought it was funny how bad they appear.

Shit I beeter go take out an equity loan to pay for beer...

QUOTE (skline @ Oct 4 2005, 09:00 PM)

That rotor is wasted. I have a set here you can have, they will be with me when we get there. If I cant make it, I will give them to Aaron or Clayton and they can bring them down. I may have to work on Saturday. I wont know till Friday night though.

That would be very cnice of you, thanks. Hope you can make it.... Would like to get to knwo everyone on the board.

QUOTE (skline @ Oct 4 2005, 07:03 AM)

I am thinking that you and Kevin should come over at least to watch. If I dont have to work, I will be there. I have dropped an engine and tranny in less than an hour by myself. As the locals will tell you, I had a lot of practice. If I can get my speedo drive gear fixed in the Chalon, I may drive it down, otherwise, it will be the truck and some parts for you. I know I have a good set of rear rotors here. I also have a few jacks and stands too. Tell Kevin (Kdfoust) to wait on his car and then we will all go over to his house and help him with his car. Is he doing the 6 in his green car? I was wondering what happened to him, he used to come out to all of our runs and events. Great guy. I may be working tonight which would put me in line to work again this weekend but maybe it will be Sunday and not Saturday. We will see.

Hey Scott. Kevin here. Yup, 3.2-6 into the green car. The engine is here. No f'n waiting on this -6 conversion. I've been messing around with engines for this car too long already. I already got the crew lined up. Three of "the crew," will kick my a** if I don't get this engine in the car post-haste!

See ya round,
Kevin

QUOTE (Twystd1 @ Oct 2 2005, 10:36 PM)

I'm gunna bring my good old trusty RED tool box with me just for Shi%s and Grins... Ya just never know what we may need... Why don't you spend a bit "O" time and make a list of all the stuff you might need for this project. And POST IT HERE..!!!! At least if any of us has some extras we can bring em with us. So what ya need? C'Mon dude.. I have a storage full of parts. You will help me by helping you... Twystd1

New addition to list of things I need. Exhaust.. rusted all to hell. I know it's expensive and everyone wants one, but if you don't ask you don't know.. Carbs, again center console, . Once the engine is out, I'm sure I will come up with a great deal more.. I have a feeling I haven't even scratched the surface.

QUOTE (bmunday @ Oct 4 2005, 08:50 PM)

Is this bad???? Man sweetrotor damage...

Just have them Wide Arch Welded, then Turned, they'll be as good as new

QUOTE (V6914 @ Oct 5 2005, 06:25 PM)

QUOTE (bmunday @ Oct 4 2005, 08:50 PM) Is this bad???? Man sweetrotor damage...  :shoot2kill:  :shoot2kill:  :shoot2kill: Just have them Wide Arch Welded, then Turned, they'll be as good as new

Skline said he had a set he would donate.... If not no real biggie, I have more pressing things to take care of anyway.