nein14
Oct 3 2006, 09:32 AM
Gauging interest in a Group buy for a GT Mechanical headlight Kit , it would be fabricated from Original GT parts. As soon as I have an idea on how many are interested the vendor can come up wiyh a cost, thanks.
Joe Ricard
Oct 3 2006, 09:52 AM
I have no idea what it looks like. Sounds like it will make my car go faster so I think I am in.
Question is what is the $$$ per Pound.
eric914
Oct 3 2006, 09:57 AM
I would be interested depending on price ($300-$400 would be cool, $600+ would not).
gopack
Oct 3 2006, 09:58 AM
Please elaborate on the advantages of a GT style kit. Is it just for the cool factor? or for those looking to precisely replicate a factory GT? or shave a few ounces? AFAIK, there aren't any issues with the stock headlight motor/relay/mechanisms are there?
TIA
Joe Ricard
Oct 3 2006, 10:04 AM
Well the head light stuff has worked well for my car. being 36 1/2 years old I'd say that pretty good.
But I am looking to lose the motors and stuff to cut pound not ounces.
nein14
Oct 3 2006, 10:06 AM
It does shave weight about 8lbs. per motor, and of course it all about the GT cool factor
Aaron Cox
Oct 3 2006, 10:07 AM
purely weight savings...
no motors.. just a "strut" and cable setup
boxstr
Oct 3 2006, 10:43 AM
This is the GT kit that was recently up for bid on German Ebay.
Bidding began at 250. euros and ended at 550. euros
Eric_Shea
Oct 3 2006, 10:53 AM
In for the $200-400 range
bjorn jacobson
Oct 3 2006, 10:55 AM
I'm very interested in a kit. Only for the cool factor though.
kckoch
Oct 3 2006, 11:37 AM
Count me in for a set. How long?
echocanyons
Oct 3 2006, 11:44 AM
I would also be interested if the price is in the 200-300 range delivered.
nein14
Oct 3 2006, 12:03 PM
As soon as I get a count on how many kits we need I will be able to give everyone the cost and delivery time.
Marv's3.6six
Oct 3 2006, 12:12 PM
Very very interested here! Have been looking for a kit for more than a year. I have been talking to aircooledracing for at least a year, they have said many times they are going to make a kit, still waiting.
If you have source, great!! Put me on the list.
Jeroen
Oct 3 2006, 12:33 PM
interested in a sub $300 kit
effutuo101
Oct 3 2006, 01:29 PM
I am interested as well for a sub 300 kit.
Martin Baker
Oct 3 2006, 01:30 PM
2 (TWO) Please...FYI, these do not close your lights after you open them...that was for the pit crew (not included).
BKLA
Oct 3 2006, 01:35 PM
I'm in for a sub $300.00 set
Time Frame?
echocanyons
Oct 3 2006, 02:03 PM
Does anyone have a picture of the pull mechanism mounted in a GT?
ChicagoPete
Oct 3 2006, 05:50 PM
QUOTE(echocanyons @ Oct 3 2006, 12:03 PM)
Does anyone have a picture of the pull mechanism mounted in a GT?
I can snap one of my car...just too dark out right now to get a good look at it...will try to add one here tomorrow.
echocanyons
Oct 4 2006, 08:16 PM
Any luck on those pictures Pete?
horizontally-opposed
Oct 4 2006, 09:08 PM
Would also be in for a $200-300 kit — if the quality is top-notch.
Also curious about how well the setup will weather repeated usage over the years... factory looked at 914-6 GTs as disposable cars (much like all of their race cars, then and now).
Maybe I need to research these more.
But I am still VERY interested. Also, can anyone confirm the weight savings?
pete
sixnotfour
Oct 4 2006, 09:21 PM
echocanyons
Oct 4 2006, 09:59 PM
The link has the mechanical parts but no pictures of the pull mounting location inside the drivers compartment.
I am guessing it is the pull in this picture that is to the right of the ?hazard lights and tho the left of the ign switch. But I dont know for sure.
sixnotfour
Oct 4 2006, 10:04 PM
pull knob can be anywhere ,most came through were the trunk pull was, as GT didnt use the trunk release.
Tangerine scream dash mounted pull;
http://www.pbase.com/9146gt/image/22288927Factory GT round black knob, hood release location;
http://www.pbase.com/9146gt/image/23456222
echocanyons
Oct 4 2006, 10:23 PM
cool thank you!
lotus_65
Oct 5 2006, 04:35 AM
i'm interested, sub $300.
thanks
davep
Oct 5 2006, 06:59 AM
I may also be interested, so keep me in mind.
fat73
Oct 5 2006, 08:49 AM
Does this kit eliminate the headlight switch?
Ed aka w9r1
ConeDodger
Oct 5 2006, 08:50 AM
QUOTE(sixnotfour @ Oct 4 2006, 09:04 PM)
pull knob can be anywhere ,most came through were the trunk pull was, as GT didnt use the trunk release.
Tangerine scream dash mounted pull;
http://www.pbase.com/9146gt/image/22288927Factory GT round black knob, hood release location;
http://www.pbase.com/9146gt/image/23456222Jeff, Does your GT use this pull system?
ConeDodger
Oct 5 2006, 08:51 AM
I am in for one... Sub $300 please
sixnotfour
Oct 5 2006, 07:00 PM
QUOTE
Jeff, Does your GT use this pull system?
Yes
QUOTE
I am in for one... Sub $300 please
I would buy another;
QUOTE
Does this kit eliminate the headlight switch?
No you still need to turn em on.
0396
Oct 5 2006, 07:09 PM
Count me in for two - if these are in the $2-300 range.
Thank you!
smdubovsky
Oct 8 2006, 01:37 PM
I'd take one in the ~$250 range.
SMD
ge9146
Oct 11 2006, 10:03 AM
I would also be interested in one in the $200-$300 range
PlanB
Oct 11 2006, 11:14 AM
I am definetly interested. Please add me to your group buy follow-up list.
jgullock
Oct 11 2006, 11:26 AM
I'm in. Let me know.
autohausdolby
Oct 12 2006, 01:37 AM
Yep, interested here too
But of a bummer being in the UK though
Perhaps a club shop with deposits is a good idea to sort the numbers? I suppose it'd mean a lot of responsibility for one guy (or girl
) though.
cork
Oct 12 2006, 09:59 PM
Let me know, I'm interested
Qarl
Oct 12 2006, 10:53 PM
I'm in for a set.
Lightweight_911
Nov 10 2006, 05:29 AM
I'd be interested in 1 or 2 sets.
RON S.
Nov 10 2006, 08:18 AM
I'd be interested also,as long as cost is Reasonable.
Ron
Eric_Shea
Nov 10 2006, 10:38 AM
Any update on this kit?
BKLA
Nov 10 2006, 11:09 AM
Update?
carr914
Nov 10 2006, 12:26 PM
Glad to have you here Andy (Lightweight 911)
I knew it wouldn't take too long
T.C.
Lightweight_911
Nov 10 2006, 12:54 PM
Thanks TC !
nein14
Nov 10 2006, 01:26 PM
hopefully soon guys
Eric_Shea
Nov 10 2006, 03:51 PM
QUOTE
Glad to have you here Andy (Lightweight 911) I knew it wouldn't take too long
Agreed... Andy snuck in from the early911sregistry
of your R Clone!!
Lightweight_911
Nov 11 2006, 04:28 AM
Thanks Eric ! I'm over here because I'm buying TC's car.
I don't want to highjack this thread but here's a couple of pictures...
Jeroen
Nov 11 2006, 07:31 AM
sweet!
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.