Some new front rotors

Click to view attachment

A New Valeo Altenator, cause I don't trust rebuilt or used ones - should have the 1st motor all buttoned up soon

Click to view attachment

More Goodies - Since I have 2 Hi-End Motors, a 2.8 Twin-Plug and a 2.7 RS, I need to be able to store the second motor that is not in the car.

A 911 Engine Yoke, Table Stand & Flywheel Lock

Click to view attachment

Click to view attachment

Good Gosh Almighty. What a beautiful bunch of parts. Can't wait to see the car complete! Let us know how to get on the 914 Stimulus Plan so we can afford those -6 parts, too. Bill

I had a bunch of those Plastic A-Arm bushings sitting around - everybody knows they sqeek. Brian (bcheney) talked me into buying Rubber Bushings, then after reading a few threads about how they deform, I decide to buy some Elephant Racing Poly-Graphite bushings.

Click to view attachment

And some 22MM Sway-Away Torsion Bars

Click to view attachment

I'm Unemployed

T.C.

Been there doing that all this year. With only part time work my car is a one piece at a time project too....just not as nice of parts. Congrats!

Believe me if I hadn't paid for the engines, the car, the bodyshop work, etc before I lost my job, I could have Never done this. I also sold my other 914-6 to fund this one.

T.C.

that is shitty losing a job
but you have quite a stash of parts to lean on....if you are ever in need of cash!!
i hope you find another way to keep your stash of parts growing!

Oh this will go to completition even if I have to sell my son. Come to think about it, I will give him away.

T.C.

Some WEVO Tranny mounts - these are cool, even though they will hardly ever be seen.

T.C.

Click to view attachment

Some Christmas Engine Porn

T.C.

Click to view attachment

Happy Holidays to All

T.C.

Click to view attachment

Back at ya' T.C.

The engine is looking nice!

Merry Christmas to T.C. He'll be sleepin' in the garage tonight.

Give us the details...

Details;

75 911S 7R case, Shuffle-Pinned, Boat-Tailed, Case Savers

Carrera RS Pistons & Cylinders

4 Bearing Cam Towers

Aggressive Cams ( I will get the numbers for you)

3.2 Oil Pump

Rebuilt Heads, New Valves, HiPo Springs, etc

Rebuilt Weber 40's, Tall PMO Intakes



T.C.

Is this cooler a mod RX-7? If it is any more pic's?
I think I have the same core for my project.
Thanks

VERY cool...can't wait to see the finished project!!

T.C.
Looking good, its nice to see things start to pull together. Next thing you will be sparking that thing up and letting it purr, porn for the ear's. Ben.

TC that is looking good ! And you will really like those polybronze bushings. Can't wait for the day you , me and Brian can finally drive our cars !!!

interesting - I am starting with the same...

Was that a difficult mod? IIRC the 4-bearing towers appeared either with or right after problems with the 2,8RSR - and since that's my target, it's what I think I've gotta do too - especially to use any of the 'modern' (e.g. GEnn) cams...

No Mark, that is a 914-6 GT Cooler, also used in 910's. The other cooler above it is a RX-7 Cooler, they are almost the same size.

I don't have any other pictures of this Cooler handy, but here are some pictures of another GT Cooler that I sold a few years ago for $2,400.

T.C.

Click to view attachment

Click to view attachment

Click to view attachment

Click to view attachment

Not a difficult mod at all, and like you said, better to use with a more modern cams.

I bought 2 sets (one set for my 2.7 & one set for my 2.8) of 4 bearing cam towers off Pelican Classifieds fairly inexpensive.

T.C.

1st of all, What is the customary period of time that someone is allowed to stare and drool at a motor before a cover should be put on said motor?

Click to view attachment

My 993 Oil Console. This fits in place of the Oil Cooler on the motor, since I will be running a front cooler. This came Directly from Germany. These used to be 1/4 the Cost

Click to view attachment

Click to view attachment

Click to view attachment

Thanks for the pics of the cooler....guess I'll get this RX-7 cooler welded up:)

TC that is one fine looking motor, I would say you can stare at it for at least a week straight !
I may be wrong but doesn't the RX7 oil cooler have a thermostat built in that has to be removed ? I thought I read that somewhere ? Other than that it is a good cooler.

The reason for the welding

It was a joke before (page 3), but now I can only hope.

T.C.

T.C Do you remember were the decals came from?

Ill help out , I recongnize the logo,
http://stores.shop.ebay.co.uk/I-Say-Ding-D...s__W0QQ_armrsZ1


I wish I had bought that oil cooler

Well, then here is some Mood lighting

Click to view attachment

Thank you!

I went by the shop today, as the car came back from the Media Blaster.

Click to view attachment

Click to view attachment

Click to view attachment

Click to view attachment

Click to view attachment

Click to view attachment

Click to view attachment

Click to view attachment

I see the Chick digs it,
You gotta be very happy to see some color. Nice

Clean slate.
I can't wait to see it in person.

Hey T.C.

It is looking good! What kind of media did they blast it with and what kind of
primer and paint are you planning to use?

Thanks,

John

TC,

I just posted a question on another thread, then realized you may be able to answer my question. If those are AA flares, would you kindly measure the rear flare from the inside wheel well panel to the inside lip of the flare at the center. I basically need to know if my existing wheel/tire will fit.

Thanks a bunch!

Andys

The Flares used on this car were Factory Flares out of my Stash

T.C.

Click to view attachment

now get some primer on that chassis....NOW...or i am going to come down and spray it myself...runs and all!!

My 2nd Dr Evil Tranny arrived today. This one has a Brand New Billit Intermediate Plate.

T.C.

Click to view attachment

Click to view attachment

Dumb question perhaps, but what does a billet intermediate plate do besides add bling to your tranny?

It's young and tight......

And the shift rod, er rods don't wallow around as much.

And it's a ring and pinion adjust.

Click to view attachment

TC,

That combo gauge is fantastic - do you happen to know if the kits to build it are still available?

Great thread - thanks for sharing all of the hard work.

Keep it up.

Mike

WOW!!!!!.....Outstanding job! Enjoyed seeing where you were and how far you've come! I'll have to refer back to this post for inspiration when I try to get mine restored.

Mike, Thanks for the compliments.

These gauges were just rebuilt by Mark at Vintage ( he's in the Vendor section), the 250klm Speedo I bought on eBay for $20, The 10,000rpm Tach is a rebuilt 930 and the Combo gauge is custom. I had the faceplate (and backplate) for the Triple in my stash ( ) from years ago. I sent Mark the plates, a 911 Temp/Press gauge and a 914 Gas Gauge. I know Vintage makes a Quad gauge.
I just like the look of the Triple.

T.C.

A Fire Bottle System with 3 Spray Heads

Click to view attachment

Cause I don't want to see this happen to my car. Sorry Dude

Click to view attachment

No need for you to take an emergency vacation, Pete.

(we need a smiley with a spray gun - we have one with a sawzall & welder)

Click to view attachment