Series9
May 22 2005, 11:38 PM
Some of you still don't understand that Liz (TurtleGirl) is not my wife.
My wife is LuckieO (Eric's girlfriend)
Series9
May 22 2005, 11:39 PM
QUOTE (Mrs. K @ May 22 2005, 10:13 PM) |
Your friend's boyfriend (Eric Shea) is really good at photoshop....ask him
Lisa |
Oh, you're right.
redshift
May 22 2005, 11:45 PM
QUOTE (914RS @ May 23 2005, 01:38 AM) |
Some of you still don't understand that Liz (TurtleGirl) is not my wife.
My wife is LuckieO (Eric's girlfriend) |
I understand now. You are all having sex with Eric Shea.
M
Eric_Shea
May 23 2005, 01:19 AM
QUOTE |
I understand now. You are all having sex with Eric Shea. |
Having sex with Joe, Z and Brad does "not" constitute "all". (maybe Sir Andy as well... I was blindfolded...)
redshift
May 23 2005, 03:41 AM
Series9
May 23 2005, 09:53 PM
OK, so a guy who knows nothing about cars says: 'wouldn't it be easier if it were upside-down'. I thought about it for a minute and agreed. Here you go:
Series9
May 23 2005, 09:54 PM
next:
Series9
May 23 2005, 09:55 PM
next:
Series9
May 23 2005, 09:56 PM
next:
Series9
May 23 2005, 09:56 PM
last:
Series9
May 23 2005, 10:00 PM
I made an arrangement with a sandblaster to remove all the 'red' for $400.
Done.
scotty914
May 23 2005, 10:01 PM
this last pic would be an easy way to adjust the valves
Maltese Falcon
May 23 2005, 10:05 PM
Hey Joe, you should listen to some "Iron Maiden" while tending to that restoration
don't forget to mark (L) turbo and ( R) turbo for future ref !
Marty
JoeSharp
May 23 2005, 10:07 PM
It looks solid, go for it. All that can happen is you find the rust.
:PERMAGRIN: Joe
TravisNeff
May 23 2005, 10:21 PM
Christ Joe, you valet park for a living in a previous life? heh. Watch that cowl when it comes back over (cracks). Ingeneous way to go.
Dead Air
May 24 2005, 01:36 AM
QUOTE (914RS @ May 23 2005, 07:56 PM) |
last: |
That is wrong on so many ways!!
Well, one way!!!
CptTripps
May 24 2005, 07:24 AM
Shit...$400 is a DEAL. I found the guy that's going to do my next one and he's getting $800.
Looking good man...looking real good!
neo914-6
May 24 2005, 09:13 AM
QUOTE (914RS @ May 23 2005, 08:00 PM) |
I made an arrangement with a sandblaster to remove all the 'red' for $400.
Done. |
Make sure they've done sheetmetal. I spoke to a guy who said his blaster could punch holes in my cast iron clawfoot tub!
TurtleGirl
May 24 2005, 09:27 AM
QUOTE (Neo914 @ May 24 2005, 09:13 AM) |
QUOTE (914RS @ May 23 2005, 08:00 PM) | I made an arrangement with a sandblaster to remove all the 'red' for $400.
Done. |
Make sure they've done sheetmetal. I spoke to a guy who said his blaster could punch holes in my cast iron clawfoot tub! |
It's a family-owned shop, and Joe went and toured the facilities yesterday. They were working on 2 cars while he was there, and seemed to really have their stuff on straight. I think we found the gem in the desert with these guys!
tat2dphreak
May 24 2005, 09:28 AM
just leave it out there and wait for a sand storm... free sand blast
Root_Werks
May 24 2005, 09:32 AM
QUOTE (tat2dphreak @ May 24 2005, 07:28 AM) |
just leave it out there and wait for a sand storm... free sand blast |
It looks great! I love the progress!
Series9
May 24 2005, 07:37 PM
How do you know you have good friends? Here's how. We got most of the bottom stripped today:
Series9
May 24 2005, 07:39 PM
Liz came over after work and worked alone because we were worn out:
redshift
May 24 2005, 07:52 PM
Well, Liz, and her R2..
(for all you star wars freaks)
M
Series9
May 24 2005, 07:58 PM
QUOTE (redshift @ May 24 2005, 06:52 PM) |
Well, Liz, and her R2..
(for all you star wars freaks)
M |
OK, where's that 'ignore users' thread?
redshift
May 24 2005, 08:01 PM
jgiroux67
May 24 2005, 08:13 PM
QUOTE (Maltese Falcon @ May 23 2005, 08:05 PM) |
Hey Joe, you should listen to some "Iron Maiden" while tending to that restoration |
NOW THATS SOME DAMN GOOD ADVICE!
Series9
May 24 2005, 08:18 PM
QUOTE (jgiroux67 @ May 24 2005, 07:13 PM) |
QUOTE (Maltese Falcon @ May 23 2005, 08:05 PM) | Hey Joe, you should listen to some "Iron Maiden" while tending to that restoration |
NOW THATS SOME DAMN GOOD ADVICE! |
Not my style....
TurtleGirl
May 24 2005, 10:02 PM
QUOTE (914RS @ May 24 2005, 07:37 PM) |
How do you know you have good friends? Here's how. We got most of the bottom stripped today: |
These guys did about 12 man-hours of work while I was busy slinging beer at the pub. What great friends we have, and I can't be more grateful! (Although... they did leave the wheel wells to me...)
I love those guys, though! (Just for reference, it was 96 degrees, no shade and no breeze... I think I owe them at least a case of beer for that!)
TurtleGirl
May 24 2005, 10:03 PM
QUOTE (914RS @ May 24 2005, 08:18 PM) |
QUOTE (jgiroux67 @ May 24 2005, 07:13 PM) | QUOTE (Maltese Falcon @ May 23 2005, 08:05 PM) | Hey Joe, you should listen to some "Iron Maiden" while tending to that restoration |
NOW THATS SOME DAMN GOOD ADVICE! |
Not my style.... |
Personally, for the crap work that I'm doing today, tomorrow and the next, a little "# of the beast" sounds perfect!!!!
MoveQik
May 24 2005, 10:20 PM
QUOTE (TurtleGirl @ May 24 2005, 08:02 PM) |
I love those guys, though! (Just for reference, it was 96 degrees, no shade and no breeze... I think I owe them at least a case of beer for that!) |
96 degrees?? Hell, we call that spring time here.
You guys need a bigger covered patio for that project!
rick 918-S
May 25 2005, 07:22 AM
Liz, I have a box of parts coming to you. I'm a little slow sending it out. I went out to the old garage to get it so I could bring it to the UPS store. It had rained hard the night before. The rain ran in under the garage door and soaked the bottom of the box. I don't have another nice big box so I had to wait for the bottom to dry out. I'll send it this week.
tat2dphreak
May 25 2005, 07:28 AM
QUOTE (redshift @ May 24 2005, 08:52 PM) |
Well, Liz, and her R2..
(for all you star wars freaks)
M |
no, no, that's an R4!! see... red and grey!
new series(1-3) version:
original version(4-6):
0396
May 25 2005, 07:42 AM
QUOTE (rick 918-S @ May 25 2005, 05:22 AM) |
Liz, I have a box of parts coming to you. I'm a little slow sending it out. I went out to the old garage to get it so I could bring it to the UPS store. It had rained hard the night before. The rain ran in under the garage door and soaked the bottom of the box. I don't have another nice big box so I had to wait for the bottom to dry out. I'll send it this week. |
Rick,
Once the box gets 'soiled / wet' I would suggest that you
retape the affected areas over with good tape.
This will ensure the box stays intact.
I would hate to see your parts fallout of the box in transit.
Just a suggestion
rick 918-S
May 25 2005, 08:08 AM
QUOTE (0396 @ May 25 2005, 05:42 AM) |
QUOTE (rick 918-S @ May 25 2005, 05:22 AM) | Liz, I have a box of parts coming to you. I'm a little slow sending it out. I went out to the old garage to get it so I could bring it to the UPS store. It had rained hard the night before. The rain ran in under the garage door and soaked the bottom of the box. I don't have another nice big box so I had to wait for the bottom to dry out. I'll send it this week. :wavey: |
Rick,
Once the box gets 'soiled / wet' I would suggest that you retape the affected areas over with good tape. This will ensure the box stays intact. I would hate to see your parts fallout of the box in transit.
Just a suggestion |
Ya, I had planned on doing it. Just have to wait til it dries. I have blocked up on styrofoam laying over on the side so the bottom is exposed. Should be close to dry now. F#@'in rain! We had one nice day here since I've been home from the WCC! That was yesterday! rain again today!
Series9
May 30 2005, 06:17 PM
After a week of work, we're down to a few remaining details.
The days of an upside-down 914 in my back yard are numbered. It should be at the sand blaster by the end of the week:
JoeSharp
May 30 2005, 07:01 PM
I knew that sucker would be primered before I got there.
:PERMAGRIN: Joe
Series9
Jun 2 2005, 07:18 PM
Off to the sand blaster tomorrow morning:
rick 918-S
Jun 2 2005, 11:39 PM
Box is dry!
I have 1/2 a day off tomorrow. I'll ship it out.
Series9
Jun 3 2005, 11:58 AM
It's at the sand blasters. We should have it back next week. Picture will follow, but I left my camera in another car.
Root_Werks
Jun 3 2005, 12:06 PM
Amazingly fast work both of you! Very cool!
Joe Bob
Jun 3 2005, 08:22 PM
QUOTE (914RS @ Jun 2 2005, 05:18 PM) |
Off to the sand blaster tomorrow morning: |
Lucky you....you gots yer own sand pile....
Series9
Jun 5 2005, 11:33 AM
The sand blaster is finished! Unbelievable!
We'll pick up the car tomorrow and post some pics.
Series9
Jun 6 2005, 07:53 PM
At the sand blaster before:
Series9
Jun 6 2005, 07:55 PM
And after. They were a little rougher with it than I wanted (with the choice of media), but all will be fine. $400 and 24 hours. Hard to beat.
Series9
Jun 6 2005, 07:56 PM
next:
Series9
Jun 6 2005, 07:56 PM
last:
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.