euro911
Nov 11 2013, 10:33 PM
Hey, clean up the face of your flywheel.
You might want to install a new Victor Reinz rear main seal, flywheel o-ring and locking plate (washer) while you're in there
SirAndy
Nov 12 2013, 12:12 PM
euro911
Nov 12 2013, 12:25 PM
Porsche930dude
Nov 12 2013, 06:35 PM
balance my front wheels on this old bubble balancer. I put the weights on the inside so its probrobly not perfect. Well I know its not perfect because it still shakes a bit. But its a hell of alot better than before . im happy with it. Also put another baffel in my homemade muffler to quiet it down some. had a drone before now its better.
Eric_Shea
Nov 12 2013, 06:42 PM
Tried some body panels on for size...
Then took her to get a soda bath...
r_towle
Nov 12 2013, 06:49 PM
Dude.....what about the 911?
Eric_Shea
Nov 12 2013, 07:07 PM
Waiting for a motor to arrive.
t collins
Nov 12 2013, 07:20 PM
New windshield and back glass installed today
Click to view attachment
JoeSharp
Nov 13 2013, 05:04 PM
I pushed it and swept under it.
ndfrigi
Nov 13 2013, 05:12 PM
try to fit them in this driveway. Only 75 914 1.8 inside the garage.
hoping to sell both 72 and 74 tub soon.
Click to view attachment
wes
Nov 13 2013, 05:24 PM
I found new to me serious rust on my car! It was painted and had some flaws that I felt not good so off to a new painter and when came to pick it up he quickly pointed out my hell hole.
The car sat outside for almost 4 years striped in the first painters yard as he worked on it, when the eng. was pulled it looked ok!
turk22
Nov 13 2013, 10:18 PM
QUOTE(t collins @ Nov 12 2013, 08:20 PM)
New windshield and back glass installed today
Click to view attachmentLooks good, is that a crack free dash or a dash cover? (If its a cover do you have any other pic's?)
thx, Turk
hot_shoe914
Nov 13 2013, 10:31 PM
Picked Betsy up from having a new windshield installed and having her rear swaybar drop links and bushing installed. Dropped the LE off to have new wheel bearings installed.
Click to view attachmentClick to view attachment
euro911
Nov 13 2013, 11:46 PM
QUOTE(Eric_Shea @ Nov 12 2013, 05:42 PM)
Tried some body panels on for size...
Not wasting any time, are you ...
914itis
Nov 14 2013, 12:00 AM
Drove
the six long distance for the first time since conversion (about 80 miles round trip) to have my carbs adjusted, felt great.
Also adjusted the linkage.
Eric_Shea
Nov 14 2013, 04:32 PM
QUOTE
Not wasting any time, are you ...
Aaaaaa... No.
type47
Nov 14 2013, 05:08 PM
Installed SS fuel lines
euro911
Nov 14 2013, 07:45 PM
Received a big box of rubber stuff from 914rubber. May prove to be an interesting evening ...
... but then again, maybe not
KENNY
Nov 14 2013, 08:03 PM
Install to new rear calipers and pads
Eric_Shea
Nov 15 2013, 04:32 PM
euro911
Nov 15 2013, 05:13 PM
Eric, did you have the whole body blasted? What's it cost to have it done?
Installed some 'blingie' thingies on the 'BB' ... new and improved air filter bases and covers
Click to view attachmentClick to view attachment
Gradskater
Nov 16 2013, 03:24 PM
Drove it! First time in a couple of weeks. Up to the San Bernardino National Forest on a rainy day. Did you guys know that 914s sometimes leak?
Eric_Shea
Nov 16 2013, 03:41 PM
Everything except the door skins Mark. They're coming off as everything on this car will be that glass you saw last Sunday.
About $700 clams.
euro911
Nov 16 2013, 05:25 PM
QUOTE(Gradskater @ Nov 16 2013, 02:24 PM)
...
Did you guys know that 914s sometimes leak? That's why I never glued my carpets in
Washed the 'BB' and drove up to San Gabriel for brunch at the Zen Buffet
80 mi round trip
Click to view attachment
wndsnd
Nov 16 2013, 07:32 PM
Installed new Windshield.
Don't need the bike goggles anymore.
Click to view attachment
Michael N
Nov 17 2013, 06:20 PM
Went over to the Central Valley to get a picture of the longs on the Creamcicle. The rockers had never been removed from the car....until today. I was nervous what might be hiding in there as the hell hole is rusty. The longs were in better shape than I expected although there was about a gallon of dirt up in there.
Click to view attachmentClick to view attachment
914itis
Nov 17 2013, 06:27 PM
Today was a great 914 day, went down to GA to help my brother sort out some electrical issues, adjusted dwell, and timing.
carr914
Nov 17 2013, 07:46 PM
Installed the Triad Exhaust & Custom Valance - Big Improvement in Looks & Sound
Before
Click to view attachmentAfter
Click to view attachment
3d914
Nov 17 2013, 08:45 PM
Got the motor into position in my SHO project. Even topped it off with the intake - though I do have slight interference to fix.
Oil pan won't be scraping bottom though & that's good!
Steve
Nov 17 2013, 08:52 PM
Gave up on trying to fix the hell hole myself and called Milt aka Zeke.
Took two Saturdays to fix, but my hell hole is finally done. I'm glad Milt makes house calls. He was a pleasure to work with and I learned allot by watching him work. I highly recommend him.
Click to view attachment
euro911
Nov 17 2013, 09:13 PM
QUOTE(carr914 @ Nov 17 2013, 06:46 PM)
Installed the Triad Exhaust & Custom Valance - Big Improvement in Looks & Sound
Glad to hear you're happy with it. Looks good on there
mgp4591
Nov 18 2013, 12:45 AM
No pics because there's not much to see, but picked up a good running SVX with 109k for 1500 to tear apart for my project. Planning on using ALOT of it on my car- now about a place to work on stuff...
76-914
Nov 18 2013, 10:09 AM
euro911
Nov 18 2013, 11:35 AM
QUOTE(76-914 @ Nov 18 2013, 09:09 AM)
Are you gonna etch that tank before you use it?
SirAndy
Nov 18 2013, 01:16 PM
euro911
Nov 18 2013, 01:35 PM
QUOTE(SirAndy @ Nov 18 2013, 12:16 PM)
Same s#it, just a different day, eh?
I looked at the 'BB' and trying to remember where I stashed the hardware to remount the side rocker covers
Click to view attachment
SirAndy
Nov 18 2013, 01:44 PM
QUOTE(euro911 @ Nov 18 2013, 11:35 AM)
QUOTE(SirAndy @ Nov 18 2013, 12:16 PM)
Same s#it, just a different day, eh?
Hey, the thread title didn't say anything about 'out of the ordinary' ...
JawjaPorsche
Nov 18 2013, 03:57 PM
Used Eagle One Mag Wheel cleaner on my Mahle's then drove it into town for an ice cone with the top off. 68 degrees and sunny!
dlestep
Nov 18 2013, 05:57 PM
Not a damn thing.
Had to drive through the massive herd of retards at 7:30 in the morning without
my routine coffee and go through blood letting at my doctor.
They wanted my blood and money !
Then, I had to drive back through it the other way.
Not a way to wake up.
I've been a grumpy old man ALL DAY.
dlee6204
Nov 18 2013, 06:00 PM
Drove it to work. And after work I had to prove to my coworkers that you in-fact can do doughnuts in a 914.
Java2570
Nov 18 2013, 06:49 PM
QUOTE(dlee6204 @ Nov 18 2013, 07:00 PM)
Drove it to work. And after work I had to prove to my coworkers that you in-fact can do doughnuts in a 914.
I think we need some video of that!!
73cool
Nov 18 2013, 07:12 PM
My dogs and I drove my '73 over 60 miles today, and it was awesome. This was a first in distance. Runs great and looks even better. Can't even count the thumbs up!
Click to view attachment
oldschool
Nov 18 2013, 07:23 PM
Worked on removing my gauge's
Click to view attachment
euro911
Nov 18 2013, 08:01 PM
QUOTE(oldschool @ Nov 18 2013, 06:23 PM)
Worked on removing my gauge's
Click to view attachmentGonna send 'em to Tim for the LED upgrade?
76-914
Nov 18 2013, 08:16 PM
QUOTE(euro911 @ Nov 18 2013, 09:35 AM)
QUOTE(76-914 @ Nov 18 2013, 09:09 AM)
Are you gonna etch that tank before you use it?
No. I just won't use the flash next time.
Makes everything look rusty or in this case rustier.
Fe2O3
Nov 19 2013, 02:51 AM
Bought a can of spider killer and joined 914world.com
Steve
Nov 19 2013, 09:01 AM
Yep my car smells like Raid too!!
'73-914kid
Nov 19 2013, 09:42 AM
Nothing..But I did order a bunch of parts...
Found out that the main jet sealing washers were dribbling fuel out while the car is running.. (Yay fire hazard) and that my valve covers are the culprit of the oil leaks at the motor.. Pulled them off and they were more warped that I could have ever imagined... So, a quick drive to Duarte on Thursday should solve that.
dangrouche
Nov 19 2013, 10:32 AM
added accessory mesh onto deposit box in passenger footwell
dfelz
Nov 19 2013, 01:36 PM
Installed a Wink mirror! the stock one would shake while driving, making seeing anything clearly somewhat difficult; and i also dont have a passenger side mirror so this should help out with seeing that side of the car better. I think it looks sexy!
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.